Everything posted by tony357
- 9mm 1911
-
Nice day went riding this morning.
Small piece of property in warren grove it is surrounded by state forest so you can get caught going in and out.. funny thing is their are so many quads and dirt bikes in this small town they actually posted sighns about atv's being illegal and you could be fined up to 1000.00 if caught riding in state forest... once a year they hold an enduro race through the pine barrons and they start and finish at the warren grove fire house..
-
Nice day went riding this morning.
Have not been out riding for quite some time. Went up to moms and broke out the blaster and went for a ride, The state cut a new fire path out to the bridge they must have done this couple years ago after the fire that swept through the bombing range over to barnegat taking out a few homes.. our town was saved by local and state fire fighters but the fire jumped 539 heading for barnegat.the homes on 532 were saved by back fires lit by state and local firemen..pinewood estates lost some homes on rt72. Beaver dam..
-
Hiviz Sight Install Kimber Team 2
Yes i did, i used two drops of red and spread it around with a buis card and removed the excess, you dont need much unless your site does not fit tight.. Remeber if you use red loc-tite you will need heat to remove it.. blue or purple will not work for this application..
-
Bad range day in Millstone today...Cops visited
You can shoot on private property.. Just as long as you are not endangering others..if it is safe your good to go.. We use to shoot in a private pit for years and then the land owner sold it to green acres... We lost that privilege and it was sweet to be able to shoot their.. only once troopers came out their, but many times rangers would stop in..
-
Hiviz Sight Install Kimber Team 2
I used the heat to remove the old one, no heat on install, file fit..
-
Probably why you should'nt open carry.
Not only that, whats up with that lady she like moves 6 inches over, you would think she would head to the other side of the room..
-
WTB: Beretta 92A1
They want to sell more mags..
-
A 1911 that works correctly is just as rare as a Glock that doesn’t
The danny banaduce imitator..LOL..
-
Best All-Around .22 Cal Semi-Auto Pistol under $400 ?? (POLL)
The SR22 has not been around long enough..
-
How Deep is Too Deep?
berry's are good they usualy stay close to each other..
-
How Deep is Too Deep?
Yes.. I am curious what bullet he is using.. have had diffrences with bullet brands.. The DP 9mm's i just purchased give me a wide range.. I just set them up to stay in specified range..
-
How Deep is Too Deep?
What bullets are they?
-
3 1/2 inch shells..... need recommendations
- If I ever a 1911, I want it to look like this
I have one all black, i do not like the comp though..- It's nice out, whose going shooting today?
Heading to stafford wma about 130- My 1911 Build!!!
Check your middle finger under your trigger finger for sharp edge on the trigger guard.. Long shooting session can rub your finger soar where it contacts the trigger guard, i have smoothed and polished that area on both of my USPSA 1911's.. you do not notice it target shooting but an all day steel shoot or USPSA shoot tends to make you start noticing..- 22lr ammo shortage?
all you ammo hoarders... I bought some, too. Oh, so you tipped the scales.. Cabela's has Federal .22 on sale, too. Yup, 69.00 for 2100rds with drybox- 22lr ammo shortage?
just ordered yesterday from gander mountain they have a sale going on with rebate comes to 14.99 box for 525 federal bulk pak.. Linky. http://www.gandermountain.com/modperl/product/details.cgi?i=420349&pdesc=Federal_Premium_22_LR_Champion_Ammunition&source=linkconn&lct=s- New Tools for keeping my 1911's Tuned...
Extractor tension gauges, Extractor tension adjustment tool, trigger pull scale.. Run diagnostics on the Kimber and AMT..Both needed extractor adjustment..- Just Picked Up My New...
- Hiviz Sight Install Kimber Team 2
The sight should always be very tight installing a new one, you should have to file fit the sight.. I hit that old sight then smacked it and it did not move, time for heat i let that slide heat until it hit 180 deg i checked it with my heat gun.. actually i was too lazy to get mine and used the kids heat gun for his remote control car..LOL.. I had to smack it 3 times before it started to move and when it did i kept on going until it was out..That is good being that tight you know it will not come out on the range..- Services for Lance Cpl. Osbrany Montes de Oca
R.I P. LCpl OsbranyMontes de Oca.- Hiviz Sight Install Kimber Team 2
Kimber had the original sight very tight, I made a aluminum punch to knock out the old sight and install the new one.. cut it to .210 to fit in between the dovetail cut.. That way the flat edge will run all the way through, i also heated the slide with hair dryer to 180 deg before removing the old sight. Fitting the new sight, started to drive in tightened up quick, removed and filed bottom of sight so it would go in about 1/2 of the way had to do this several times, also had to remove some material off body of sight to clear slide both front and back, once it was set for final drive i used two drops of red loc-tite and installed sight to desired position. Old sight being heated for removal. filing to clearance slide, you can see no clearance at rear front filed. new sight ready for final install after fitting. new sight driven home pic of aluminum driver.. sight picture. side view.- .22 LR BULK AMMO
LINK? - If I ever a 1911, I want it to look like this