Everything posted by djg0770
-
Kydex sheath issue with CRKT neck knife
Pop rivets won't accomplish it. I agree with effd, use heat.
-
Wedding band
Nope - not just you...
-
The bears are out
I see Yogi got his picanick basket.
-
Masonry & Damaged Steps
Ah that explains a few things, including your desire to prevent boiler shock...
-
Online form for purchase permits
Shhhhh! Not everyone follows the rules and in one or two cases its in our favor!
-
Masonry & Damaged Steps
DS, I have heard that the O2 barrier on Onyx has been failing resulting in premature failure of the internal heat exchanger due to oxygen corrosion. Just a heads up...
-
Remember 870 & 1100 chokes
Permatex Anti-Seize http://www.walmart.com/ip/20056284?wmlspartner=wlpa&selectedSellerId=0&adid=22222222227016774191&wl0=&wl1=g&wl2=c&wl3=40873343912&wl4=&wl5=pla&wl6=78766073552&veh=sem
-
Masonry & Damaged Steps
Mark - if i were to design it, you would run a heat exchanger with a dedicated snow melt loop - this allows you to do two things - maintain the snow loop temp at a much lower temp and also separates the glycol loop from the non-glycol loop.
-
Ham radio
But they do ask you equally inane questions, like what's the penalty for a second dui.
-
New (Old) Range
Fucking entitlement society. Maybe Iran nuking the world wouldn't be such a bad idea.
-
2A - Wrongfully charged resident found not guilty!
No lawyer, properly trained, will ever provide advice on an internet forum as that opens him up to the potential for severe liabilities. As a result, we are then required to read the law for ourselves and attempt to make a determination (for ourselves individually) as to what we think the law states. Laws (as with all rules) are open to interpretation, and have been since the first law was written.
-
What should I buy next?
Advice on the Ruger LC9 from an owner of one - Don't buy it. If you want to consider a Ruger product, consider the LC9S, the striker version. I understand the trigger is much better.
-
Question on the Pistol Permit portion of FID application
This. To prove a point, I put down 10 on my last round of applications, I was issued 10. There is no "limit" - anyone that tells you that there is a limit is in violation of the law, period. We have got to stop being pussies about these "camel nose under the tent" incursions on our freedom. Yes, I wasted 4 or 5 of those permits (OMG at $2 a piece I'm going to go BROKE!), but I proved a point, and had I actually stumbled upon an exemption worthy collection, I may not have wasted any of those permits...
-
2A - Wrongfully charged resident found not guilty!
Because only the bad man has a gun... Cmon guys, you really should know better. Did you think this was Texas?
-
Newark police recovered .22 caliber machine gun equipped with a silencer
Exactly.
-
2A - Wrongfully charged resident found not guilty!
Finally some good news out of this crap hole state.
-
Do You Know Your Rate of Twist? Really?????
So you are assuming ZERO slip in the patch, huh? I have some issues with that. The bearings in a cleaning rod are not "precision bearings" designed to rotate under an axial force per se. While I think the basic method above will get you close, I believe there's a margin of error which you have not accounted for.
-
Shocking Interview with a Glock engineer about the Glock 43
If you don't find that funny, you might be a Glock Fanboi.
-
Educating the Anti, NJGunSense.com
Nappen recommends NOT carrying loaded magazines, his rationale is slightly different however. I don't particularly agree, but...
-
Four rules of Bike Riding in NJ
Jeez - I thought it was "Did you hear that? I thought I felt a bump!!" or "OMG look what you did to my CAR!!"
-
How well do you shoot & the 10,000 hour theory
10,000 hours at work = 5 years of experience. The theory has some flaws, but I think we can pretty much agree that once a person has 5 years experience at a job, they know what they are going to know. Just look at job postings - most of them state "minimum five years experience". Do you think that's because HR read about the 10,000 hour rule or because, in practice, it tends to weed out those who have no experience and know nothing.
-
How to have a longarm serial number traced to insure not stolen?
If you feel that you have to have the serial number "traced" maybe the right thing to do is say "thanks but no thanks"...
-
Brick Armory Closed by NJ Div of Taxation ?
Since THIS topic is a dead issue, I am going to lock it.
-
Patiently waiting in Hudson Country...
Not exactly correct. Permits are good for 90 days. Just prior to the end of 90 days, you MIGHT be able to get your permits extended for another 90 days, but it's at the local Police Chief's discretion.
-
Utah CCW
Yes. Just be aware that some states distinguish between a resident permit and a non-resident permit. This is a good resource: http://www.usacarry.com/concealed_carry_permit_reciprocity_maps.html