Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

KpdPipes

Members
  • Joined

  • Last visited

Everything posted by KpdPipes

  1. Yes it is..LOL when I moved I think they needed a whole UPS truck for my file.
  2. Funny thing is on the way down there to meet another couple i was stressing to the Maker of the Sandwiches how important eye protection was.
  3. "Never shoot reloads that you didnt make yourself"????? I should have listened, managed to blow up (Kinda-sorta) my PT-1911 Sunday at Brick Armory. SO Far it just appears to be my Grip panels which are the casualties (along with a couple of small frags in my cheek). Gun looks ok, im going to detail clean it and check the dimensions just to be sure, if I dont like how it looks I may send it to Taurus to have them check it to be safe. My own damned fault for not inspecting the ammo a little closer, and i didnt notice that there was a .38Sup+P in there..probably loaded up to Major class, and the case itself looked a little..."Lived in" had about a 1/4" by 1/16" strip peel loose from the side of the casing just above the extraction groove. Case was in my truck but i cant find the damned thing now. I'll get some photos up when i get a chance. On the Plus side my OWN .45 reloads, first batch from my Progressive press seemed to work pretty darn good so it wasnt a complete bust. Now of course i have to get new grips for my PT....not a bad thing as the REALLY Cheapo-plastic factory grips were teh suck.
  4. part of the change of address is your old town sending copies of all of your P2P's to the new department
  5. Probabtion and parole both are not considered LE
  6. KpdPipes replied to Marc's topic in Rifles
    I think they got spanked after the last time
  7. If NY passed it, you'd see the last couple of manufacturers left there move....I wonder what would happen if the entire Industry did what Barrett did in California? Refuse to sell to ANY NY Local, County or State LE agency over this law being passed.
  8. Not all of them..Most attorneys bill for that stuff, even if they work for the Towns...nevermind overtime costs for anyone who has to testify ect Which is why so many Municipalities will just settle, it costs them less in the end than winning the trial
  9. it CANT go to DOJ....Holder IS the DOJ, it would have to go to a Special Prosecutor, and IIRC, POTUS is the only person who can Appoint a Special prosecutor. No matter what happens, Expect to see a Blanket Pardon for Holder on Jan 19 2013
  10. This.. Mini's HAD issues with accuracy, there was a time when if you were LUCKY a standard Min-14 would shoot Minute-of-Barn Supposedly those issues have been addressed and the current ones are decently accurate. What ti comes down to, is trying to find someone who has one, and shooting a few rounds through it to see if you LIKE it..Nothing worse than dropping a few hundred dollars on a firearm you end up hating.
  11. CG, one more thing when it comes to reloading....You can do it VERY cheaply with the Lee Starter kit (Midway has one for $99) or spend $192 for their Lyman kit. Dies and Shellholder for .300AAC (same shellholder as .223) Dies are under $50.00 for the Lee set and the extra Factory Crimp Die. Plus once you get set up for ONE caliber...well, you know
  12. Ammo isnt all THAT bad..you can get it for around $12-$15 per box if you shop around. As far as reloading, that's not all that expensive to start doing either.. .300AAC brass (Remanned from 5.56) can be had for pretty cheap (Brad's Whse $114/500 $220/1K) One caution of you build it yourself. Midway has barrels from SI Defense..NICE barrels, but the gas ports are VERY tight..i'm still playing with mine to get it to feed right...waiting till i have access to a mill or a really GOOD Drill press to bore out the gas port a tad. And Yes TM before you ask, I swapped out the Spikes H-2 buffer for a standard and tested it, as well as checked my Gas Block alignment before i decided i had to open up the port a little..Found out later that SI barrels are somewhat infamous for this.
  13. Considering your age..Cap-and Ball Revolver?????
  14. Ohh and he can FOAD..Hope the put him under the Jail..If you want to die THAT Effing bad..that's fine, but do yourself, dont try and make some other poor Schmuck do it FOR you.
  15. I've spoke to Kyrillos, and he never came off as an Anti...i'd settle for Neutral. as far as Menendez goes?? I wouldnt vote for him as dogcatcher, the guy is the Epitome of Hudson-County Corruption
  16. M-Pro-7 had a REALLY good kit out there as well..not overly expensive, and it handles almost anything out there..i wouldnt use it on a Precision rifle, but it makes a great range kit in my Match bag...added plus is that M-Pro7 doesnt have a nasty odor.
  17. REALLY fine, as in 0000 fine, and i'd personally use Kroil as opposed to WD-40. Give it a good coat of Kroil, let it sit for 5 min then lightly hit it with the steel wool, it wont mar the bluing, i;ve done it on a few guns over the years and have had no issued with finish
  18. Depends entirely on the local rules. HERE?? ANY firearm used in a shooting is going to be kept forever if there is an injury or death involved..but thats MY county policy..otehr counties are different, and it's completely possible for a firearm to be parted out and only the Serialed Frame/Receiver to be destroyed once the case is closed out, again depending on local rules.
  19. IF IT IS STAINLESS ONLY!!!!! "Lead Away" Cloth will take that fouling off with some elbow grease..used one for years when i was carrying a Revolver....DO NOT USE THAT ON A BLUED GUN, it will remove the finish.
  20. Looks like he got his clock cleaned in the divorce...the question is if the ex got an RO for a legitimate reason or to screw him over and he snapped. there's an allegation of possible steroid use, so it could go either way...of course no matter what he's screwed, and rightly so..he swiss-cheesed a Bucks County PD car
  21. Working, G-23 in a Fobus open-back (TLR-2 on the rail) on MY time, either a Colt Defender (Officers ACP) in a Comp-tac Minotaur tuckable, or a full-size 1911 in either ,45 or .38sup in a Crossbreed tuckable

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.