Everything posted by KpdPipes
-
Change law to 20 round mag limit
The majority of legislation in this state exist ONLY so some politician could stand up in front of a News camnera and say "LOOK!!!! We did XYZ for YOU..now Vote for me in November" the fact that there may have already BEEN a law on the books that covered "XYZ" and in fact the enactment of "XYZ" conflicted with provisions already in place has actually HURT the possibility if prosecuting someone for the offense in XYZ is beside the point..the politician got his.her soundbite in.
-
Curious about .22 leverguns
Same concept..those CAS guys get pretty innovative. Some guys that use different caliber guns use the tubes anyway, especially if their rifle is say .45 Colt and their revolvers .44-40, or .38 colt. the only reason i stopped doing it for my Henry was the pretty solid history of problems with that design and centerfire ammunition. ***Note When i say "Henry" I am Referring to the 1860 Model, NOT the Modern "Henry Repeating Arms"*** Originally they were chambered in ,44 Rimfire, and held almost 20 rounds in the magazine...mine in .44-40 holds, iirc 14. I made up a spacer to take up the extra space so i didnt have do do the "Henry Hop" to feed my last couple of rounds as the follower comes up against your hand for the last couple of rounds in the magazine.
-
NYPD, Feds Testing Gun-Scanning Technology
Titie 18 USC (United States Code) Section 242, Deprivation of Civil rights under color of Authority.
-
Kel-Tec KSG
Only because they're just being introduced..just like ANY new product. The RFB, and the PMR-30 were the exact same way, impossible to get, prices through the roof, until their production caught up to demand..This will be no different. By the summertime, things should have settled down, and you'll be able to get it for normal pricing. This is just the firearms equivalent of the PS-3 introduction. it's a matter of patience..i want one, but i dont NEED one, therefore i can wait until things stabilize, and the first run of Production models are out, and glitches if any are addressed.
-
New Comparison - Handgun "Stopping Power"
in the end, it all comes down to Shot placement, and round construction... a well-constructed .380 (Say a Hornady Critical Defense) will be MORE effective than a ball round from what may normally be considered a "Better" caliber. There is a reason we (Police and Military0 are taught to shoot for center-mass... In a high stress situation, your fine motor skills are one of the first things to go..Center-mass is the biggest target, the fact that it ALSO houses the majority of the organs, as well as access to the spine is just a plus.
-
New Comparison - Handgun "Stopping Power"
it's been a while but i BELIEVE, that it worked out to an average of 3-5 rounds under 7 yards in under 5 seconds for the majority of Police Shootings.
-
GSG 5 fans?
Go to Ar15.com, click on the button for "Armory" Scroll down to the "GSG-5" forum.... ohh hell. i left the link cold, but cut and past this http://www.ar15.com/forums/t_6_41/244302_GSG_Mods___Firing_Pin__Mags__Buffer_Stop__Screw_Replacement__Fake_Can__Laser__Lowers.html into your browser. there is a section in there with instructions on how to use an Airsoft MP-5 trigger pacl (and sources) and jsut slip the GSG trigger assembly in. I was hesitant about getting one, until i actually had it in my hands at Arms-n-ammo bought it on the spot.
-
AR Build done for now..
Dammit now im gonna have to take pictures......
-
Curious about .22 leverguns
Marlin are generally side ejection, and Winchester top ejection for Centerfire. Rimfire (Except for the Winchester 1873 .22 repros) are side-eject.
-
Curious about .22 leverguns
There are guys who do iit for the Cowboy action matches, basically tehy use a piece of copper water pipe of the right diameter for their ammo, and a push stick. Measure out a section of pipe 1" loner than 5 rounds , drill a hole 1/4" back from each end for a cotter pin or clevis pin IIRc they also bevel the "Front end to lay flat on the reciever. Set yoeur loader in place with the pins out, and use a dowel to push them all in. Repeat as needed. most of the one's i;ve seen are 5 rounders because the Rifle portion of MOST stages is 10 rounds. I had something similar for my Henry Rifle (Uberti repro of an original Winchester/Henry), with one end plugged..stopped using it though after hearing a few too many stories of gang-fires in Henry rifle mags doe to the design..also learned to let the follower EASE down onto the top round rather then just twisting the barrel shroud and letting the follower "Snap" down.
-
Curious about .22 leverguns
Marlin, any of the Winchester 1892 or 1894 replicas use the Loading gate, ONLY the original Henry Rifle (Uberti) reporductions use a front-loaded magazine tube, aside from the New "Henry Repeating Arms" firearms...to my knowledge they are the only folks who are NOT using a leading gate in the frame for their non-rimfire firearms.
-
Denied buying a gun
Your State license is basically at the whim of NJSP, while you may win in court, the subsequent loss of revenue, envermind the huge legal feea are enough to give anyone pause...all the Moral high Ground in the world doesn't put food on the table or keep the electricity.gas on.
-
AR-15
Correct on Both.... I rolled the dice on the Ergo stock, as opposed to putting another Ace skeleton , and I'm glad i did..As i said before i'm really impressed with the solidity of it as compared to a standard-style Carbine-type stock, NO rattle whatsoever, and it locks up like a bank vault....now to decide where/how to pin it..Oh and i'm going to load the thread protector for the comp up with AAC's Rockset, which will NOT come off under normal conditions,
-
nj muzzle break ??
I am unaware of any time this has actually happened (Permanence of a brake being checked)..Absolutely have it permed, but it's not soemthing that is really ever going to come up.
-
AR-15
Personally I dont mind building up..just did one last night in fact, while the Sammich-maker was out at a meeting of her bereavement group. only thing left is to put the muzzle device on, drill, pin and weld, which i'll take care of as soon as it comes in..i HAD been planning on putting a Surefire brake on, with the intent to supres it eventually once im out of NJ. After looking around though, I found that Spikes makes a comp/mount that costs just a little over half as much, AND their supressor will be cheaper as well for my little Hog-buster down the line. NOW i'm a happy man. Next step, figuring how to pin this damned Ergo-stock....Which BTW I HIGHLY reccomend. It's a little spendy at around $140.00, but it's ROCK solid, and pretty comfortable,
-
so what do you do to tease your dog?
Chasing laser pointer...pointing and yelling "Squirrel"
-
AR-15
Depends on what you want..with a Del-ton or similar M-4 style upper from Midway right around $400, and say a Cav-comp (Brownells) for under $30.00 you probably CANT build up your own cheaper ETA, pricing it out on what is available on Midway, and going cheap you can do it for pretty much about the same price.
-
AR-15
The good part about building is that you REALLY get to know how the system works
-
AR-15 parts...where??
Almost forgot, Primary Arms, and Midwest PX-(Forum member)
-
AR-15
Not at all..most folks until they've done it, don't realize just HOW simple the process is to go from a box of parts to a functional rifle. I put together a lower during my lunchtime at work on Friday, took me less than 30 min to do it..and only THAT long because i ad to go out into the garage to tap the roll pins in. Literally the HARDEST part of the whole thing on a new build is the muzzle device...and THAT can even be simple if you go with a Cav-Comp or one of the others with the Pin-hole pre-drilled, or go with a Crowned bbl and eliminate it completely. I did the one on my late daughter's .22 with a hand drill..but i've also got access to a welder....and someone who knows how to use it LOL. I'll be putting a sure-fire on my .300 Blk sometime in the next couple of weeks..I'm still deciding if i want to do it myself or send it out to Adco.... The $150 or so once you factor in shipping would buy me 1k of brass
-
State Police Arrest Four on Weapons Charges
I think that is hyperbole on the part of either the NJSP PIO or the Reporter, or at least an incomplete list of the charges...there's no charge of MG possession under NJ law, which WOULD be there if he had an FA AK. I'll find out tomorrow if i get a chance.
-
GSG 5 fans?
RRages is your friend if you have a GSG. The screw kit is a MUST, the HK stock set gives a whole different feel to the gun, and Promag 10-rounders can be easily converted to 15's One tip with the pro-mags though DO locktite the screw and nut that hold the thumb block onto the magazine follower, they can and do loosen up if you shoot it a lot. So far mine has eaten every single type of ammo i've put in it, even Eley subsonics and Aguila 60 Gr subsonics...and it loves Federal bulk pack. A couple of other good places are COmbat Optical, Cope's, and this place http://www.robertrtg.com/mp5.html has a lot of MP-5 parts as well.
-
Battle comp legality?
because the laws were written by people who made decisions based on looks and names, rather than actual function. To the Chimpanzees who wrote the 1992 AWB a "Flash Hider" obviously means something that allowed you to shoot from cover without giving your position away..rather than the ACTUAL function which is to reduce the flash signature to the SHOOTER to preserve night vision.
-
AR-15
\ This I drive an hour and a half to use paul's shop.
-
Ally from Cape May
Van Drew is also the guy who wanted IIRC $500.00 per year for a CCW permit or some such fee.