Everything posted by KpdPipes
-
Largest Caliber Rifle You've Shot?
Ohh an unregistered machinegun????? Seriously though I DO have one better than that..I once shot a .500 Nitro Double Rifle, who's owner FAILED to tell me was malf'ing the same way with 570gr solids. Shoulder felt (and looked) like a Mule kicked me, i had a nosebleed for about 2 hours, and looking back, probably a mild concussion since my ears rang and my vision was blurry for a couple of days.....about the only smart thing i did was take the scope off, or i probably would have managed a broken orbit as well. Biggest NON-injurious round was a .460 Weatherby magnum
-
Judge upholds NJ carry laws
No, Clinton appointee FEDERAL Judge... Mirroring the decision in a similar case against NY..... This was NOT a surprise to anyone who has been following this
-
FEDERAL JUDGE TRASHES
Oh Agreed..that said.. Scalia isnt getting any younger....AS much as I despise Romney i may have to (once again) hold my nose and vote for him, because at this point for the POYUS election ANYONE but OBama needs to be the watchword. Look, Romney isnt a conservative by ANY lights, and there's no guarantee he'll put a constructionalist ontp the court, but we KNOW what Obama will put on the court, and Kagan and Soto-Mayor both have stated their displeasure with the results of McDonald and Heller.
-
C&R in NJ?
The ONLY advantage would be to get the FFL pricing on Brownells stuff..however NJSP seems to have somewhat of a sore spot when it comes to C&R 03FFL's and try to make problems for holders.
-
Gunsamerica.com
Add in shipping, transfer fees and the like, and you might see that there isnt all THAT much difference.
-
Gunsamerica.com
True..but not everyone has something specific, especially if it's an older model or more rare type on hand. If I decide tomorrow that I want an .44 Auto-Mag..what are the chances of one of our Site retailers having a used one on hand? Gunbroker and sites like it are a decent resource to have available.
-
Denied buying a gun
Absolutely..that said the majority of retailers are going to want everything to match, mainly because that's what NJSP "Suggests"........
-
Denied buying a gun
To confirm that the name listed on YOUR FPID is the same one as on your license, since 99% of people would have no other means to confirm it's you...other than us Fingerprint Examiners...Hmmm, What would you say to a buyer or seller that wanted to roll your print to compare it to the one on your FPID??? In all seriousness, the DL has your photo on it, and it's a nice, easy (Somewhat, since nothing is ever REALLY Secure) way to confirm that you are who you say you are. If you buy a gun from ME, or sell one to me, i WILL be makign a photocopy (if at my home) or taking a digital photo of your DL and FPID front and back, or there is no transfer.
-
Denied buying a gun
So far (knock Wood) Hazlet is Ok..I dont think i've been more than 10 minutes for ANYTHING there, as compared to Wallington (Garfield??) where there was a line around the building last time I had to drop off a box of license plates from evidence...even the regional office in Eatontown was quick last time i had to go there for something. OP might be better taking the drive down to hazlet, even with the 40 minute drive and tolls it's be quicker and easier than dealing with the northern MVC offices.
-
Denied buying a gun
It's actually unlawful...but DMV/MVS are lazy and don't bother to do anything more than copy what's on the form. The Ultimate fault lies with them you aren't permitted to have your address listed as a PO box on your DL, yet MVC prints them that way all the time.
- FEDERAL JUDGE TRASHES
-
FEDERAL JUDGE TRASHES
Midwest, there's probably no way you COULD fins the information on original wording online. They do EXIST, however, you would have to physically go to one of the Law Libraries. and hand pull the old books, to read how the statutes were written. Usually however they ALSO have the relevant caselaw from any court proceedings as well.
- FEDERAL JUDGE TRASHES
-
Kel Tec KSG vs SRM 1216
Price point seems th be the major difference..at least OUTSIDE the PRNJ..MSRP is $2400 for the SRM with another $200 per magazine. If and when the KSG is up and running, MSRP will be around $800 with an actual retail probably between $6 and $7 Hundred. The SRM seems interesting, but WAY spendy..even for the 3-gun guys who seem to be going towards Saigas and Benellis
-
How to Pin Magpul CTR Stock without Drilling
ETA...make that Monday..which means i wont get my stuff till tuesday, since i had it sent to work,,,damn holidays
-
FEDERAL JUDGE TRASHES
He doesnt hear those kinds of cases..different level entirely.... That saide, After NY's case was dismissed for the EXACT SAME THING, did anyone here REALLY think that this was going to go any differently?? Now it's in Alan Gura's hands, and SCOTUS's. Y'all had just better home that none of the current justices on OUR side croaks while Obama is president before this is heard.
-
300 AAC Blackout AR15 Builds
I had the upper and lower, i;ve already got a dedicated .22, and 2 5.56's, so it was time for a different caliber. I figured my choices were .300blk, 6.8 and 6.5 at the time i seriously started looking into which, i found the .300 blk barrel on sale from midway for cheap so i went that way. I still want to do a 6.5 grendel, but im probably going to go with a higher end matched upper and lower like a POF or something similar for that one.
-
How to Pin Magpul CTR Stock without Drilling
Stock and other small parts will be delivered tomorrow, and the lower will be assembled after i pin the stock. Surefire brake, and YHM wrench will be here friday or monday, at which time i'll assemble the upper, and then the "Zombie Special" (Well..Hog Special) will be ready to rock.. Finally building up the Matched ZEDU lower and upper i bought over a year ago.
-
300 AAC Blackout AR15 Builds
there's also commercially-converted brass out there..a place named Brad's sells converted LC brass for 150/K, which is the route i'm going to go. I'll get a couple of boxes of factory just to work it in, then reload. Even though the Supressor isnt an option i;m still going to work up a subsonic load, using cast bullets which i want to use for Boar.
-
Yankee Hill Machine Fluted Barrel Feedback Anyone
I just bought the YHM "Smooth" free-float handguard so far it seems pretty decent, the only sucky thing is you need their wrench to install it the right way.
-
AR-15 parts...where??
Palmetto, Brownells, Midway, Bravo Company, CMMG..bought parts from all of them no problems thus far
-
300 AAC Blackout AR15 Builds
CMMG was selling it for under $20, and Midway carries factory-new brass.
-
Hypothetical situation - pistol with no serial #
Who gives a blue damn WHAT it is..if it has a defaced serial number it could cost him ALL his guns.
-
How to Pin Magpul CTR Stock without Drilling
This. While I prefer not to blind-pin, I counter-sink the holes and fill with JB-weld after i install the roll pin. in response to what you said earlier though Shane..the Majority of guys if they even BOTHER to look, are only going to looks as far as the stock not moving, they arent going to give a damn if it's blind-pinned, welded or anything else. I;m waiting for my ergo to come in sometime this week, then i have to figure out how to pin THAT..never had one in my hands before so it should be interesting. That one is going on the .300 Blk
-
What oil do you use?
Hoppes or better yet M-pro 7 for cleaning and leave the EWL just for lubing. I put a light coat on the bolt for storage, and keep it wet while i'm shooting. it doesnt need to be running out of the bottom of the trigger opening of course, but i've been running well since i went to it. While i still have a quart of Hoppes sitting on the bench, it's for backup, i'm using the M-pro all the time now.