Everything posted by Cylinder Head
-
help deciding
I buy cases of Fiocchi 9mm for $200 a case, and Fiocchi 62gr .223 for $300 a case. Top quality stuff, after 6,000 rounds of it I've had two bad primers total.
-
Picked up an H&K P30 from BH
Some (many) would argue for the P7.
-
Looking for a .308 semi-auto
Nowadays you're just better off with a KAC, a LaRue OBR, an LMT MWS, or a SCAR-17.
-
Stickman gear photos
I follow him on flickr. His stuff rules.
-
Picked up an H&K P30 from BH
Get a case of 124gr. Fiocchi from dansammo.com and put that through it. You're still going to get brass in your forehead but it'll break in soon enough. Awesome gun, after wearing in the trigger a bit I can put an entire mag into a 2" shoot'n'see at 15 yards offhand. Amazingly low recoil.
-
Highly Recommend
I agree Anthony is the man. I've taken a few classes with GFH, even sent my girlfriend there for their Pepper Spray and SD course (which she tried to use on me). Top notch instruction, no BS and always SAFETY FIRST. So when is that damn Carbine course going to be???? I'm dyin over here!!
-
Looking for a .308 semi-auto
I have personally not heard about a broken SA receiver, ever. Nor did I ever have any issues with my M1A SOCOM II, however I did swap the bolt and guide rod for USGI spec forged parts. What I have heard is that just about every Springfield M1A that shows up at a 3-5 day course ends up having some sort of issue from the instructors I've talked to. They just don't like to be truly abused.
-
magazines. how many do you like to have for each pistol
10 mags at a minimum for me. I have 14 for my P30L.
-
Looking for a .308 semi-auto
M1A's are great rifles, but Springfield examples are not to USGI spec and the cast parts (including but not specific to-the receiver) will break under hard use. If you want a great example of a USGI gun be prepared to spend good money. LRB makes excellent M1A's. That being said, get yourself a SCAR-17 and call it a day.
-
Experience at the bullet hole
I agree with you that the place is small and packed with so much stuff that it's impossible to move. If they had a larger facility it would make things a whole lot easier but Manny has expressed multiple times that it is cost (and permit) prohibitive to move their operation.
-
Experience at the bullet hole
I use the table for all of my gear. I bring a ton of stuff when I go.
-
Experience at the bullet hole
Funny I was there Sunday at about 2, and waited for a port until almost 3. WAY TOO PACKED. Anyway the one RO (old guy who looks like an extra from True Grit) never seems to recognize me and reads me the riot act about "no head shots" with my rifle every time I'm there. He usually doesn't give me problems but will tell me to slow down at least once a session when I'm working my dot drills with 2" shoot-n-sees. The other RO is way cool and happens to be my favorite person at the entire shop. Just like anyone, you have to get to know these people. You would not believe the amount of asshats they get at the BH. The place is like a failure magnet. I've been muzzle swept more times than I care to count, I've seen idiots shooting everything but the target, and I've seen four dudes in Affliction shirts all sharing the same .45ACP Glock. They should do a study on that place.
-
Anyone know any cool / interesting restaurants in NJ or PA?
I second New Hope/ Lambertville if you're down south/central. If you're up North shoot me a PM with what you like to eat and I can give you a littany of excellent date restaurants.
-
Thoughts on this comp?
Save up and get the Battlecomp, what's your freedom worth?
-
need help and info on M1A build
To the OP, if you're going to get an M1A I recommend NOT getting a sage stock as you'll have to ruin it in order to make it legal. Troy makes an excellent modstock for the M1A and you can get it with a Magpul PRS which I believe is Jersey Legal. Troy will also sell you a muzzle brake. However I will tell you this, these guns are HEAVY, and they are HEAVIER when you start adding modstocks and optics. I'm not a small person (6', 200lbs) and I had a very hard time holding my M1A steady at the range. I went with a lightweight AR (literally half the weight of my M1A even with optics and furniture) and am extremely happy with it. There are better options out there now regardless. To anyone thinking of going the M1A w/ modstock route I'd tell you to get a SCAR-17 and thank me later.
-
Belated Christmas gift from BATFE
Congrats! I look forward to doing more business with you.
-
M855 Penetrator-5.56mm NATO Winchester Full Metal Jacket
Informative article but it's painted over with the military's marketing-speak. There's an 8-page long thread on M4Carbine.net where SDM's are exchanging nightmare stories about the EBR's lack of support. De-linking M80 ammo because they can't get any M118LR, only armorers are allowed to take apart the sage stock because it's impossible to get replacement parts in theater. No magazines, no spare parts. Not to mention the totally erroneous statement that an M4's range is limited to 300 yards. That's total BS. An M4+ACOG will reach out to 500-600 yards, marines shoot that far in training, but 7.62 rifles are better suited.
-
H&K P30 or P30L
I bought my P30L from cdnninvestments.com, they're a favorite over at HKPro.com. Great service and they'll transfer it right to your FFL. GREAT PRICES. As was mentioned, you need to BREAK IN the recoil spring. It will not like 115gr ammo at first. I basically only shoot Fiocchi through my pistols (which is loaded pretty hot) and I got several forehead tattoos from 9mm brass when I was breaking in the P30L.
-
M855 Penetrator-5.56mm NATO Winchester Full Metal Jacket
None of our boys in the sandbox are using Garands. They might find a few on dead hajji's, but that's about it. Depending on who you ask, there are still M14's out there but for the most part they are poorly supported.
-
Evil Features
Paterson Gunsmithing will also pin your stock for you. They did a fantastic job on my ACS.
-
Guy at the range with a Magpul UBR
Well, now I feel like crap for not giving the chap a heads up. He really made me want to get a UBR too!
-
Hearing Protection Thread...
I have a set of cheapo HK branded Peltors that block out all but the biggest booms, and I have a set of MSA Sordin Supreme Pro's ($$$) that will allow me to hear a mouse piss on cotton but aren't the best indoors. Both work well, but the Sordins make me feel bionic.
-
Guy at the range with a Magpul UBR
This was a normal dude, he had just built the rifle. Nice guy too. I'm just surprised how few people really understand a fraction of NJ's gun laws.
-
Advise on handguard replacement with continuous rail
DD Omega is a great rail. I'd only put one of those or a KAC URX on an AR.
-
Guy at the range with a Magpul UBR
I was at the BH a little over a week ago, place was literally dead at about 6:30PM and my friend and I had the run of the place for a little over a half hour before a guy and his girlfriend show up. He notices my rifle and my HK45 and starts talking about how he left his HK45 at home but loves it, and mentioned that we both used a good amount of Magpul stuff. Anyway he pulls his AR out and I notice he has a Magpul UBR mounted on the back of her, and before I can ask him what kind of a pain it was to pin when he just rips the thing from fully closed to fully open. I kind of sat in amazement, I had even talked to him about how I got my ACS pinned. This guy tells me he does 3-gun all the time, nobody's said anything about the stock, and nobody has said anything at the range either. Is he in for an inevitable reckoning? Should I have said something?