bbk

Yea man, I'm with Ray Ray-- I think the AK looks just fine. Looks a bit heavy, but we can only get stronger... plus, if/when the zombies come-- hopefully you'll have more backup to cover your end when you have to haul that thing

From my knowledge, an FFL can have firearms that would be considered illegal for NJ residents to own with the intent of selling to out of state residents or to do gunsmithing (to make it legal for example). They might not stock a lot of them, but they can if they wanted. As for legal variants, its been said already-- most companies make an NJ legal variant. Personally when I buy another AR, I'm just going to get/build a lower, and then get the upper I want-- and have aftermarket work done to make it compliant. Mostly because the brands I trust do not necessarily make an NJ compliant model-- or charge too much for too little (or flat out too much). There's no instant gratification, and it might cost a hair more (though, probably less in the long run in most cases). And the consumer can still support their local business by purchasing, say, the lower through said local business (which would have to be done through an FFL anyway). That's just my 2 cents.

+1 for Enemy at the Gates for a true sniper flick. The Hurt Locker didn't do it for you? I would say its the closest to the real thing. Black Hawk Down was missing the crudeness, as do most military movies (which always rubs me the wrong way). This isn't a movie, but "Generation Kill" is an excellent portrayal. While it is based on real life events with scene-by-scene accounts, they didn't cut corners to make it more PC or appealing to the public... just tell it how it is.

... live off of in-n-out, cigs, and vodka/cranberries for a week? Gosh, I miss Vegas. Enjoy it for all of us.

Pssh, us vets don't get ---- unless we're 100% or retired.

Hope not the world ends on May 21st 2012 !!! Thought it was Dec 12th 2012?? The Olmec* calendar starts its cycle again on Winter Solstice in 2012, which is 21 Dec. http://en.wikipedia.org/wiki/2012_phenomenon ETA: Should be interesting to follow... it almost seems like there is something in the air that might bring about change-- on the other hand, probably not.

That scene is a bit sickening considering guys actually did that.

Eh, with the outreach of gangs with Latin roots reaching the suburbs of the east coast (though primarily in the states south of here)-- it won't be long before those gangs reach our suburbs. Just a matter of economics for them.

I might attend the May meeting, depending on how its all scheduled. Have fun this Sunday, gentlemen and ladies (not to discriminate).

Sounds like a gang crime... initial thoughts of course.

Thanks for sharing. I had the opportunity to volunteer some hours at VA sponsored retirement homes. Really interesting people with some really interesting stories. Its humbling, but almost haunting how much things haven't changed for the boots on the ground (and similar comparisons for the other branches). Looking through the pictures, I couldn't imagine going to work for an extended amount of time with the amount of gear they had (or didn't have for that matter). Maybe the troops hump out more then necessary these days... but I'd rather have too much (w/o sacrificing mobility) then not even having enough socks :shock: Heroes, real heroes.

I'll promise you that if you can get use to the BAD lever, its sooo worth it. I was really concerned with how it would affect my "manual of arms" (I finally have Vol. 1 in the mail, and I know I'll be bombarded by Mr. Haley's "manual of arms" breakdowns)... honestly though, as NJ609 pointed out, its a lot more natural. I've been using the one-handed technique to manipulate the charging handle for awhile now (muscle memory per say). Adding in flicking the BAD lever up to lock it, and down to release it has been seamless. I really do think it transcends being a theory-based product, and is a must have for AR users. This summer if I can make it to one of the big meets, I'll let you have a go at the Redi-Mag.

There was the recent 7.2 in the Baja California area (4 APR): http://earthquake.usgs.gov/earthquakes/ ... 607652.php Now, today there was a 7.7 in Northern Sumatra, Indonesia (6 APR): http://earthquake.usgs.gov/earthquakes/ ... s2010utc5/

Yea, I'm actually upset with myself that I didn't pick up a BAD lever sooner. Caine: Even thought you're pretty weird ( ), you can still utilize the Redi-Mag with the left hand. I spent the last couple of minutes trying it out, and its definitely do-able, even though my weak side is pretty weak. Your trigger finger can also manipulate the lever that is depressed (inwards, towards the AR), and then use the support hand to grab the magazine and insert it into the magazine well of the AR. Its definitely not as fluid of an operation compared to how righties would use it (simply to use the support hand to grab the magazine, and use the thumb to depress said lever to release it, etc)-- but doable.

Me! Ha, funny you mention that too because its the exact reason why I won't be there tonight.

That is a pretty interesting graphic, I've re-read it a couple times now. The argument of "Brave New World" and "1984" is that they would function in the same universe... in essence working in a symbiotic relationship. As pointed out, it is troubling that a dystopic vision of the future has indeed manifested itself.

Ah, those Scandinavians. While notorious for their spats, I believe this [popular] video was actually staged. Though in my competitive CS past, I definitely broke enough keyboards, mice, and headsets then I'd want to admit. Ultimately my buddies just bought me one of those cheapie desk mics that were near impossible to break, haha. Nerd rage ftw!

I don't have pictures right now as I would rather provide quality pictures instead of less then decent phone pictures for a review. I will update this post when I do add the pictures though. To note from the get-go, both products are for AR variants. I recently got the original MK 1 Redi-Mag from Boonie Packer (http://store.magpul.com/product/96/100" onclick="window.open(this.href);return false;). There are other iterations of both the Redi-Mag and B.A.D lever on the market. Boonie Packer does offer a quick attach version (MK 1 QA listed on the previous link), and Blue Forces Gear offers a skeleton version of the Redi-Mag known as the Redi-Mod (http://www.blueforcegear.com/product.cf ... prod_id=91" onclick="window.open(this.href);return false;). The MK1 goes for $80, MK1QA at $85, and BFG at $175. There are other iterations of the B.A.D lever, but for brevity's sake, I'm sure people can utilize a search engine. Magpul's design retails at $30. The point of the Redi-Mag is to hold a spare magazine without using magazine couplers or 100MPH tape. Though, to be fair, the Redi-Mag's design is far different from the concept of couplers (whether aftermarket or homemade). Unlike couplers, the Redi-Mag allows for independent manipulation of the spare magazine compared to attaching two magazines to each other. The current design allows for the user to independently release the magazine from the AR, and release the magazine in the Redi-Mag separately. The original design released both magazines simultaneously. With the Redi-Mag from Boonie Packer also comes an extra part called the Bolt Catch Extension. Because of the design of the Redi-Mag, and how it sits on the mag-well, manipulating the bolt catch can be difficult. Boonie Packer remedies this by including a large piece of polymer that goes over the bolt catch to allow easier manipulation. I would assume most people know of the BAD lever from Magpul. Generally, it attaches to the bolt catch, and allows for manipulation of the BC without having to remove the primary hand from the fire position. --- Installation: I installed the BAD lever first as I received the part first (though it would have been easier to install this first anyway). The installation for the BAD lever is pretty self-explanatory, and took maybe three minutes. The Redi-Mag required a bit more finesse. Though, once I realized where everything was meant to go, the installation took about five minutes. --- Thoughts: I never installed the bolt catch extension that came with the Redi-Mag because I was using the BAD lever. However, if I was not using the BAD lever, I would think using Boonie Packer's BCE or something similar would be necessary. Because of the design of the Redi-mag, trying to manipulate the bolt catch is a bit of a squeeze. As for the Redi-Mag, I opted to go cheap as I couldn't justify spending the additional $95 for the Blue Forces Gear version considering its literally the same product with a dremel tool taken to it. With that said, I do believe there are reviews online of people who have done just that (something I might consider down the road). Once installed, the Redi-Mag was rock solid. The positive feedback when inserting a magazine (a *click*) is great, and the lever that is depressed to release the magazine is very manageable. After putting around 200+ rounds through the AR, the Redi-Mag didn't budge, nor were there any issues while operating the AR. In the actual operation of transitioning from a spent magazine, and inserting a fresh one via the Redi-Mag-- it did take some practice. And, honestly, it will continue to take practice to get it right. I'm more accustomed myself to 30-round style magazines, so straight body magazines (I'm using 15rd PMags in 20rd body like most of you) is something I'm still adjusting to, in terms of proper grip, etc. However, with that said, there were no failures, just some juggling initially. A big aspect that a lot of reviews/people have discussed is the weight issue. I recently changed from the full bodied EOTech 517 to an Aimpoint micro optic (H-1), as a means of reducing some weight on the rifle. So, why would I go ahead and add the weight of the Redi-Mag and an additional magazine w/ 13-15 rounds? Honestly, I hardly felt the weight. Also understand that a 30-rd magazine + rounds comes out to be around 1 lbs. So, two 20-body magazines with 13 in each comes out to be roughly that 1 lbs.; while most of the complaints about weight are from users using two 30-rd magazines, fully loaded. One pound may not sound like a lot, but weight = pain, and every ounce counts. In my case, considering I dropped my optic from being about 12 oz to roughly 5oz (to include the mount), and most of the weight is on the side versus top-- this is why I hardly feel the weight difference. Weight is preference though, so I won't say definitively if its not a deal breaker or not. Operating the BAD lever also takes a good deal of practice. Its an amazing product if used correctly for manipulating the bolt. I would recommend to get a badger latch or a charging handle that is ideal for one-handed operation (like the BCM Gunfighter)-- considering that's the whole point... otherwise, if the user prefers using the more traditional method, just skip the BAD lever all together. A lot of users like how it makes for easy, super-fast reloads... though the point is bolt manipulation for any means (I believe weapon malfunctions was the initial reasoning). I got them both as they work in conjunction. My reasoning for the Redi-Mag is because my AR is my primary HD firearm. While I do not expect to ever have to fire more then one or two rounds (if that), the fact that I can carry an additional magazine is a huge plus-- considering most weapon's malfunctions are magazine related... and if that were to happen, at least I could quickly ditch the bad mag, and have a secondary one at hand. As for the BAD lever... I think if I had to choose between one or the other, I would take the BAD lever as it really does allow the user so many more freedoms. It reduces awkwardness when trying to manipulate the system, and does so without sacrificing time or anything else. My last point though is that these types of modifications, like every other aspect when depending on a firearm that you may use to defend your life and possibly your loved ones, is to PRACTICE/TRAIN. I can definitely admit that I am not proficient with the process yet, and would not be comfortable utilizing it in an actual situation currently. Its definitely going to take some time, but I wouldn't have spent the money and kept them on my AR if I didn't think they would compliment the system and me as a user. *Will add pictures ASAP.

I admittedly don't have the time right now to watch all of the videos (busy reading a handful of other texts), but Aldous Huxley really was something. "Brave New World Revisited" is probably just as eye opening and good as the initial text. I can't say I agree with his pacifism or incredulous drug use, but his intellect is unmatched in post-modern thinking.

"Tacticool" is an equipment list Agreed otherwise.

Yea, the issue with the older models has been the thinner barrel from my understanding, which affected accuracy.

Oops, it should read as "family members" :oops: Sorry for the confusion, edit incoming...

+1. The first RE was "OK." I can't say I'm a long time fan of the original video game series, but I can tell there is a huge disconnect there. Like the Silent Hill movie, there is almost no connection between the original stories and the feature films except for names really. To think that the movie series for RE has been this successful is a bit surprising considering how much of the actual base has alienated the movies, ha.

I caught Clash of the Titans, too, though just on the normal screen. I was pretty content with that, and glad I didn't spend the money to watch that movie in 3D as it was a bit of a let down (and I couldn't imagine it being any better in 3D).

1:34 in the trailer reminded me of the Trinity "death" scene in Matrix Reloaded. As for the movie, its a decent point made, Maks. There have been progressively less and less zombies as the movies continued. Instead they've added mostly the "super zombie mutant" types. ETA: I saw Alice myself. Trippy.