Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Caine

Members
  • Joined

  • Last visited

Everything posted by Caine

  1. Thanks for the heads up, Ben. The handgun DVD looks decent. I own both of their Carbine DVDs (shocking, I know ) and if the handgun DVD is anything like those, I'm sure it'll have some good info. The Aerial DVD is a little perplexing... seems like way too narrow of a target audience to warrant a DVD. I imagine the vast majority of people that will pick it up will do so simply because the Magpul logo is on the cover If nothing else, Magpul puts out some good gun porn :drool:
  2. That sounds rather ominous... Huh? So, if I have a can of Krylon I can get locked up?
  3. Trying to change eye dominance is supposedly do-able, but not easy. I pretty much do what Mikey does - shoot handguns right handed, and long guns left handed (altho I sometimes switch back to the right hand and just close my left eye - depends on the rifle i'm shooting). One thing that helps me with the hand guns is to slightly move my head to the right so that my chin is near (and sometimes touching) my biceps. This lines up my left eye well behind the sights. The other option is to just move the handgun a little to the left so the sight lines up with your left eye. I find this a little harder to do just because I've been doing the head tilt for years (long before I bought my first gun) and muscle memory kicks in. With the long guns, you just have to practice shooting with your left hand. I'm SUPER right handed, but switching to lefty wasn't nearly as awkward as I thought it would be once I did it a couple times. I'm at the point now where I can hit all the controls on an AR left handed or right handed without giving it much thought. But again, gotta practice it (dry obviously). Good luck
  4. Yes yes.. we all know what you were doing..
  5. Which is exactly why all these laws are completely pointless and only affect the law abiding citizen.
  6. :handgestures-thumbdown: OH.. and if you can't find a used XD, you're not looking hard enough. There's been 2-3 on here in the last month
  7. Some of this seems to be true: http://www.bloomberg.com/apps/news?pid= ... kyS4.975YM http://www.reuters.com/article/idUSTRE59T4QN20091030 I admittedly didn't read either article word for word, but at a quick glance, it seems like the "treaty" is more geared towards international sale of weapons as opposed to local sales.. importing, exporting, etc... altho I guess if importing is restricted it would impact local sales. But again, I didn't read it very carefully.
  8. Congrats!
  9. Close - Noveske uses the same steel that M249 barrels are made out of. Not surprisingly, I happen to agree with almost everything bbk said. I'd probably move DPMS to Tier 3.. and maybe Sabre to Tier 2... but that's just me. I will respectfully disagree with the latter part of that statement. Not all the companies listed are "milspec". 1/9 twist is not milspec. AR15 bolt carriers are not milspec... and a staked gas key isn't too much to ask for, is it? That said, I largely agree with you - the average shooter doesn't necessarily need all the "mislpec" bells and whistles and the bench shooter certainly doesn't. Building an AR, to me at least, is putting together a package that meets your needs (be they perceived needs or actual needs). For most people, a "budget" AR will work just fine. The line is slightly blurred when you buy a BCM or DD AR for a couple hundred bux more than a Bushy or DPMS. IMHO the extra money is worth it. Regardless, just keep them well lubed, give the parts (BCG, castle nut, etc.) a quick once over every so often, and everything should run fine. Oh.. and all my TVs are Samsungs
  10. Nice! Enjoy it and let us know how you like it
  11. Three matches does seem a bit excessive, but the fact that it's even an option is a positive to me. It's definitely a tricky thing. NJ, not being a CCW state (well, technically CCW permits exist, but no normal humans have ever seen them), drawing from a holster is not the sort of thing most people probably practice. So, I can understand a range's reluctance to allow drawing from holsters, especially since, like you said, it's not that uncommon to get swept by some moron that barely knows which end of the barrel goes bang.
  12. IMHO, the position you decide to pin it at should largely depend on your body position while shooting standing. If you shoot "squared up" for example, a full extended stock will probably feel awkward, especially if you have shorter arms. If you shoot very bladed (body turned at an angle) then a longer length of pull may be more appropriate. If you can't get to try out different lengths, my suggestion would be to find what an A1 stock's length of pull is and have the stock pinned to that length. And, just for reference, I'm about 5'11" with longish arms. One of my ARs has a Sully stock which is basically the same LOP as a collapsible stock one click out from fully closed. My other AR has a MOE stock that was pinned at the 2nd click out from fully closed if I remember correctly... which is approximately the same length as an A1 stock. Both lengths work for me and how I shoot. In the end, stock length, like almost everything in the AR world, is very subjective Good luck
  13. I did see it. My Surefire e1e light has something similar on the end that has also been called a "DNA Collector". Either way, it's a pretty nifty "low-pro" doo-hicky to have handy. Everyone needs a pen, right?
  14. Another suggestion, which, again, is somewhat dependent on your particular application, is using a bicycle tire inner tube to hold the switch in place. This seems to work particularly well if the switch is mounted to a vertical foregrip, altho I think I have seen it done on standard m4 handguards as well.
  15. This only applies to Surefire lights mounted to firearms with rails, but they just came out with a new switch that attaches to a piece of rail: http://www.surefire.com/Remote-Dual-Swi ... Light-SR07
  16. Is Kimber a person? Or a .45?
  17. 1g05RwTpFG8&feature=player_embedded# If you watch the video at the 3:00 mark (give or take), he mentions the problems with the .40S&W Glocks and how Glock has fixed those issues in the 4th Gen Glocks that are coming out soon.
  18. Amen. Those folks are no joke when it comes to airport/airline security.
  19. This should be good
  20. Are you sure that's a legit image from a TSA scanner? Doing an invert on it clearly works on that picture, but I tried a dozen other pictures I found online that were supposedly tsa body scan pictures and none of them had the level of detail of that picture. Not saying any of the ones I found were necessarily legit... just wondering if someone purposely set up that picture to invert like that
  21. I wish it was standard practice at more places. At CR only LEOs can use holsters if I remember the rules correctly. No drawing from a holster at BH either as far as I know. Anyway, back on topic Only visited OB on one occasion for a class, and it seemed like a pretty decent range. One of the board members, Jim Norman, was in our class, and he seemed like a good dude.
  22. Dunno how I missed that bit when I was looking into clubs :doh: that's a pretty big check in the "plus" column in my book.
  23. I checked to see if I had a left over detent from my build, but sadly I do not. This won't help you quickly, but midway has most of the parts individually. As for how to install it, I used a small curved needle nose plier and an exacto knife just like in the video linked on this page viewtopic.php?f=46&t=1237 Worked like a charm for me.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.