Everything posted by Caine
-
Gathering interest - NJGF engraved AR Lowers
This would be my biggest gripe with the current design. Seems a little odd to have a 1911 picture on an AR. I think I'd rather see something simple like the NJ state outline with maybe NJGF written vertically down the middle. This is really quick and dirty, but something like this:[attachment=0]nj_njgf.gif[/attachment]
-
Gathering interest - NJGF engraved AR Lowers
I'm pretty sure it hasn't been posted yet. Altho I have a pretty good guess who it may be
-
wolf ammo in AR15
I shot 300 rounds of PMC today.. So I only listened 2 out of 3 But, in honor of you, I also shot 20 rounds of Federal
-
Just Got my first AR
You can add 5.45x39 to the list: http://www.aimsurplus.com/acatalog/Smit ... _Half.html - needs to be made compliant of course
-
LTD ammo has Federal 9mm, 40 S&W and 45ACP in stock
LTD used to be my go to place for ammo. During all the price gouging, they were, 9 out of 10 times, the cheapest place to get ammo from. I still look there first, but lately, there have been a couple other places that have been cheaper. Still, Tom (the guy that runs it) is a good dude, and LTD's prices are still better than 90% of the online retailers. Now, depending on what I need I usually check the following places: LTD AIMSurplus Palmetto State Armory Glen's Outdoor AmmunitionToGo (generally way too pricey, but they sometimes carry things that are hard to find anywhere else) It's nice to have choices
-
Neighbors house got robbed! Time for a better gun safe.
I'm not sure if we're agreeing or disagreeing based on what you said, Chad. Cabinets are a no-go in my opinion. The 60 second number I threw out was a largely arbitrary number to get a point across... and also assumed a screwdriver and not a 30 lb pry bar that your average thief is not going to be carrying around with them. I agree that if you can spend more money on a safe, that you'll get a much better product. But, not everyone can afford, or even has the room for a $1500 safe. I was largely limited to what I could get because of a door I needed to get thru, and since I just bought the house, I wasn't really interested in knocked down a wall just to get a safe in. As far as the video goes... I can only speak to how I have my entry level safe set up. It IS bolted to the floor. It is also in a position that makes it extremely difficult to get any leverage with prying tools. So, the chances of 2 thieves knocking my safe to the floor and then each using 30+ lb pry bars and their entire body weight to break it open isn't really high on my list of concerns. That said, I have no doubt that if an experienced thief has time to mess with it, they'll get into it. Same way I don't doubt that there's a dozen different ways to break into my house that make the alarm largely useless. An entry level safe isn't the answer for everyone, and if that's the impression I gave based on what I said, then I misspoke and should have chosen my words more carefully. It is however an option, and IS a better option to a cabinet. The link I posted has quite a bit of info that covers a number of different options for a wide variety of price ranges and needs and is of much more value than any of my opinions
-
Neighbors house got robbed! Time for a better gun safe.
Also, there's some good info in this link that explains some of the different features and what to look for: http://www.6mmbr.com/gunsafes.html
-
Neighbors house got robbed! Time for a better gun safe.
This is just my opinion, but, the material cabinets are made out of, at least most of the ones I've seen, is generally too thin to offer much protection from someone trying to break into it. Think high school gym locker. A good screwdriver and maybe a hammer, and you can probably get in within 60 seconds. It'll keep kids out and what not, and yes, it's better than nothing, but if you're looking for something that'll keep a thief out, then a "real" safe is the way to go.
-
Tell me about your experiences w/ the M&P
I have a few hundred rounds thru my M&P 9, and overall I really it. The 10 round thing is really what keeps me from liking it more and why I spend more time shooting the G19. But it's a great gun.. "points" really well... it's more accurate than I am. All the controls are reachable without having to make any modifications. Probably the only complaint I have with it, and I've mentioned this a few times in other posts, is the trigger. The reset is a little harder to feel compared to my G19. But it's not so bad that it's a deal breaker by any means. The damned 10 round mags are frustrating, but again, not a deal breaker. One thing with the 10 round mags tho... they are REALLY hard to find. I still only have the 2 that came with the gun. Every time I try to pick up some more, I go thru the usual list of online retailers and they're always on backorder. If you're looking for a polymer framed, striker fired gun, the M&P is a great choice, and you won't be disappointed.
-
Neighbors house got robbed! Time for a better gun safe.
Make sure you get a SAFE and not a cabinet. Big difference. Also, go bigger than what you think you need. Whatever you buy, bolt it to the floor. I went with this one: http://www.costco.com/Browse/Product.as ... 3*&topnav= It's OK - shoulda gone bigger. But the price includes the shipping
-
Got a good chuckle
I'm actually behind on my reading these days and have 4 books waiting for me right now. Soon as I'm done with those tho, I'll let you know
-
Got a good chuckle
Nice! My Amazon wish list has grown a lot today
-
Got a good chuckle
Since we're making recommendations My favorite author is Barry Eisler and his "John Rain" series. I'm a knife guy as much as I am a gun guy, and that dude knows his stuff! Plus, there's something satisfying when one of the main characters just kills someone with the same knife you happen to have clipped to your pocket while you're reading the book After that, check out Vince Flynn's "Mitch Rapp" series, and Brad Thor's "Scott Harvath" series of books. All very good action/mystery/thriller/gun authors. The Barry Eisler books have the best sex scenes, tho
-
What does everyone do for a living?
bah, that's way to subtle. it might've been if the copy I printed out didn't have the tactical response logo on it
-
What does everyone do for a living?
LOL I printed out the 4 firearms safety rules and thumbtacked it to a wall in my cube Oddly enough, no one has ever made a single comment about it
-
What does everyone do for a living?
It's an interesting observation. I know a lot of the other IT guys I've worked with over the years have had at least a passing interest in guns. I don't particularly advertise that I have guns, but if it eventually comes up, I've never gotten the typical "what do you need that for?" from IT guys.
-
Got a good chuckle
Hunter is the guy that wrote the book Shooter is based on, right? Think I have a few of his books on my wish list at Amazon, but haven't gotten around to getting any yet. Will have to go look now
-
Got a good chuckle
I read one of his other books a while ago - "The Watchman". There were a few cool guns mentioned by name in that one too. It's always cool to read a book where the author took 5 minutes to actually flesh out the gun details a bit instead of just writing something generic like "he pulled out a revolver"
-
What does everyone do for a living?
Me too. Altho I suck at it I also do some *nix & win administration.
-
Good place to custom order an Upper?
You may wanna check ADCO to see what they currently have in stock - they can NJify anything they sell (for a fee of course). You can even have them build you a custom upper with the specific parts you want. I bought my first AR from them, and they're good guys to deal with. Aside from them, bravocompany is where I'd go. They have a really really good selection of higher end uppers. You won't find any del-ton or dpms or bushmaster or anything like that there. More like their own BCM upper, LMT, Noveske & Daniel Defense. I just bought a mid-length upper from them and had it sent directly to PK90 so he could install and pin/well a muzzle brake. Oh, one more - Rainier Arms. They have a few uppers in stock too and recently started doing muzzle work, as well. They also carry mostly the higher end brands. I've only bought parts from them, but have always heard good things about their customer service.
-
Great deal on some great pants
Got mine today. Bought 2 pair. One is Sierra (brown) and one in Coyote (darker khaki?). The Sierra ones are a little tight in the waist, but I feel like one size bigger would be too big. They are not in any way uncomfortably tight. I found the length to be just a hair longer than expected. I also found the legs to taper a bit towards the bottom, and wasn't thrilled about that. When I put boots on, the opening is very snug around the boots, and as a results, the pants bunch up more that I prefer. The Coyote ones were actually tighter than the Sierra ones. Not significantly, but it was a noticeable difference. I also found them a little tighter around the thighs, and not surprisingly, the taper on the leg also seemed more noticeable. Whatever sewing issues they supposedly have aren't very noticeable. Yes, the stitches are a little sloppy, but nothing major. Will this play a roll in how well the hold up? Who knows. Overall, for the price I paid ($11.99 instead of 14 or 16 or whatever they charge for the FUBAR), they're not bad. You get what you pay for, and maybe just a little bit more depending on your fault tolerance and body type
-
Dicks Sporting Goods, guns???
They do to some degree - the Stoeger I bought from them a few weeks ago is basically a Stoeger Condor but they call it the STF3000. Not sure what the difference between the two is. But for my intended purposes, it didn't really matter, so I went for it.
-
Shotgun for HD and Skeet
I just can't get into the chinese knockoffs for a weapon mounted light. I picked up a cheap (~$25) LED handheld just to try it out and compare it to my other lights (mostly Surefires and Streamlights) and the thing is garbage. Supposedly puts out 200+ lumens, but i'll be damned if my 60 lumen incandescent surefire isn't brighter. And the "programmable" tailcap is just a pain. I never know which one of the "modes" it's in till I click it and then get blinded by the strobe mode which it's inevitably in Not saying there aren't better ones out there, but after that little experiment, I think I'm sticking to the brands I know.
-
Shotgun for HD and Skeet
A buncha places sell them. You're looking for this basically: http://www.opticsplanet.net/streamlight ... embly.html You need the battery door switch assembly and then the remote switch of your choice (I guess coiled for a shotgun). Never tried one myself, so can't say how well they work or not
-
Gathering interest - NJGF engraved AR Lowers
That one worked. Thanks Ken