Everything posted by Malsua
-
Queen Palm trimming
LOL. No, that's my home in Florida. Those guys showed up when I was back here and I watched them do it live. The amount of shit dropping out of the trees was amazing. As a normal course of events, almost every day when we are down there, more shit comes out of the tree. Annually they need a big trim like that.
-
Valentine 1 Gen 1
Okie doke. I just PM'd you.
-
Queen Palm trimming
I recently had my queen palms trimmed. I am not sure what I find it fascinating about it, but these trees make a TON of garbage, constantly. These guys came in and practically filled up their trailer with the debris. Warning, this is 35 seconds of your life you won't get back.
-
Chip's last flight
When our Bichon was a little Tater tot, I put up deer netting over the deck, just for this reason. Now he's 26lb and it'd take a Pterodactyl to get him off the ground, lol. I saw a Great Horned Owl munching on a cat some years back. It was standing there about 2 foot tall enjoying Garfield tartar. I don't know if it was a road kill that it moved off the road, or was just death from above. That Owl was proud of his trophy though.
-
Food vacuum sealers
We have had this one. https://www.amazon.com/VS-02-Vacuum-Sealing-System-Starter/dp/B00IUAK39A/ref=sr_1_8?dchild=1&keywords=NESCO+food+sealer&qid=1595982263&sr=8-8 For at least 5 years now. We buy bulk meat packs, separate into meal sizes, vacuum seal and freeze. It works just fine. We also use it to seal smoked cheese. After you smoke cheese, you have to seal it for 2 weeks or it's bitter. The vacuum sealing lets the smoke migrate to the inside of the cheese. We seal apples slices when the apples come in. They spend like 8 hours on the dehydrator and then get sealed. We seal corn we cut off the cob and freeze it. We had a bag of Silver queen tonight for dinner. We had sealed it last fall. It gets a LOT of use. You have to pat the grease off of chicken otherwise you'll get these rivulets that suck up to the sealing area and prevent a seal. Some juicy red meats will do it too. You can also just put it in a bigger bag, but the bags cost money. No matter what you get, you'll appreciate when your 6 month old tenderloin that you bought on sale isn't frost burnt at all!
-
New Member - FID Card/Permit Wait Question
Congrats. I just want to echo what was mentioned up thread. Get a full sized something for your first handgun. I have some small ones that I carry when in Florida, but they aren't really that much fun to shoot. I practice, but keep it to minimum, they tend punish your hand over time. I can shoot my H&K P30 all day long though and I usually have to force myself to stop after 200 rounds! Stay away from hand cannons until you're comfortable. I own a couple .44 magnums and first shot a .44 over 30 years ago. I still don't tend to shoot more than 30 rounds at a range session. It's fun, it's loud but 200 rounds? Ooof. Sore wrist for sure.
-
Valentine 1 Gen 1
He did ask first, but I'll ship to you just as easy if he doesn't want it. The only small issue is that the coily cord is loose from the insulation right at the plug. It doesn't affect anything though. You can just see the underlying wires. Works fine and has been that way for a couple years so I didn't bother getting a new cord.
-
Valentine 1 Gen 1
You still interested? I used the V1 Gen2 on the trip to Florida and have been _VERY_ pleased with it. It is exceptionally quiet and the USB function has been perfect. I normally don't fire up JBV1 but it's nice to use it for tweaking settings. I won't say the V1 saved me on my 2500 mile round trip with 100% certainty, but I believe it certainly got me slowed down 3 times in ambush style setups. The Ka range on this new one is insane. A New V1G2 is $499.00. Using a trade in, you can get it for $389.00. They just opened up trade-ins in the past week. I could sell this thing on Ebay for $150-200 but then I'm dealing with the unknown and 13% in fees. I'll sell it to you for $100 shipped since you're a gun guy. The Gen1 is still a good device, it's just not as good as the Gen2. If you decide to upgrade it, you're saving $10.00. If not, you can turn around and sell it on Ebay for more than you bought it for. I can do paypal, free shipping or you can pick it up. I'm good for it. Enough people here know where I live
-
Calling computer network specialists
I can tell you why it's happening. Starts with a T ends with rendnet. Seriously, only buy that brand for stuff that really doesn't matter much. Their powerline lan adapters work fine. No where near their advertised rate, but they work. Their NICs will reliably work at 100mbit. I wouldn't buy a gigabit card though. Low end switches where you aren't really stressing it? Fine. Their POE switches have been fine, but even with a ton of traffic, cameras aren't really pushing that much data. As long as it's not your main switch at a 32CAM NVR, it'll be fine. As a router? No way. Too much to go wrong.
-
F-15 Intercepts Cesna in Trump No-Fly Zone
It all depends. If you've got any shady bs going on, expect the inquisition. If you just stumbled into the airspace, you might just get a warning. If you require fighters to launch flares? You're in a world of dog shit. License, aircraft, everything could be forfeit. Airspace is not something they screw around with. Unless you're Indiana Jones, then landing on the Taxiway, twice is no biggie.
-
Calling computer network specialists
All depends on specs. About 15 years ago we were buying these 32 port layer 3 cisco switches for around 3k each. It was insane. The traffic load was 1/100000 of what the switch could handle. Hell, a dumb consumer grade switch from Walmart would have handled the traffic out to production equipment. The guy was a dope. The computers pulled a 2k to 10k text file every 10 minutes or so and occasionally hit the server for a directly refresh and he's got small data center ready switches to run 'em. Dumbass. I made his opinions irrelevant when I suggested some HP procurve switches for 1/10 the price. Most of those are still running today and there is no issue. He was "let go" in 2010. A few were upgraded because the management on the old ones wasn't as good.
-
Calling computer network specialists
I don't understand how DHCP from the FIOS box is getting routed to clients on the Trendnet side. A client on the LAN side of the Trendnet sends out a Layer 2 request for DHCP. This should not cross over to the wan side. That's the whole point of a router. It should not pass the DHCP request to the wan side. Some other thoughts. Turn off DHCP on the FIOS box, assign a static WAN IP on the Trendnet box. If it is still getting a 192.168.x.x IP then your DHCP is hosed on the router, like there's a stuck entry at the top of the table. I'd do a factory reset on the router and start over. I'd also make sure the firmware is up to date. As for the ASUS router, I have, conservatively recommended ASUS routers to at _LEAST_ 100 people and I run 5 of them myself(one for each home, 3 for my surveillance networks). I have YET to have anyone have any issues with them. I do recommend the higher end ones where possible but these just work. Yes, I'm quite sure they have had failures but compared to Dlink, netgear, trendnet, engenius and a host of other hop sing brands, it's a drop in the bucket. Commercial routers is a whole different game, but no one I know is going to pay a couple grand for a CISCO router than can handle multiple fiber inputs and GIG connections.
-
F-15 Intercepts Cesna in Trump No-Fly Zone
Yeah. I know. I studied up for my part 107 license and it covers all that. I never could get a slot to get tested within 100 miles of here so I gave up. It's probably a lot easier now, this was over 3 years ago. Class G's floor should be tree tops + 100 or something like that. Make a new zone called class P "The people's space" where I can fly my toys where no aircraft larger than it can ever possibly fly.
-
Calling computer network specialists
See that's the thing. The Fios is on a 192.168.x.x subnet He sets his Lan side to 172.x or 10.x He connects to it and he's getting 192.168.x.x. He says " Once I connect the TRENDnet to FiOS however, the TRENDnet no longer issues IP Addresses, the FiOS does, which of course creates havoc. " How does he know the IPs are coming from the FIOS box? Is he looking at the DHCP table on the FIOS box? If so, then yeah the router is misbehaving in a bridge or hybrid mode. I'd more likely suspect that the router defaulted back to a 192.168.x.x DHCP subnet which then won't route. You have to find out where the leases are coming from. Either way, the router is the issue.
-
F-15 Intercepts Cesna in Trump No-Fly Zone
Someone didn't read their NOTAMs FYI, the edge of the Trump No-fly zone is literally at the edge of my back yard. When I first bought my Mavic Pro drone everything was groovy. Then DJI started implementing the no fly restrictions. When I would attempt to take off from my deck when trump was in Bedminster, the software would honk beep and the drone would take off, lots of warnings. If I flew to the back yard it would stop letting me control it for the most part and land. It was like the controls lost 90% of their stick power. At this point, they had locked the firmware on the drone so you couldn't return it back to version without the NFZ stuff. I found a utility online that worked for a while(dumbledor) and set it back to .4 firmware. I then set the tablet I use to never connect to the internet because the software, even firewalled off, somehow knew I was running an old version and wouldn't let me fly. Had to uninstall it and re-install it from archive and stop it from ever getting an IP address. All this so I can fly well under controlled airspace in my back yard. Sheesh.
-
Calling computer network specialists
I know you've resolved this but if you aren't getting packet routing from the Wan Side to the Lan Side of the router, the answer is one of two things. 1. The IPs are in the same subnet. I.E. 192.168.1.1 on the wan side and 192.168.1.x on the lan side. Not routable. For what it's worth, all private IP blocks should be 192.168.x.x or 10.x.x.x or 172.16.x.x 2. The router is a POS. I buy a tremendous amount of equipment for networking. I would only buy Trendnet for something that wasn't critical. I.E. not a router. It's essentially low end Chinese junk that works pretty good when it works, the rest of the time, not so much. My guess, in your particular case, the router is letting you change the lan IP block to something other than 192.168.x.x but the Chinese probably hardcoded the routing table to 192.168.1.1 even though DHCP is issuing 172.16.x.x addresses.
-
Chip's last flight
Saw this the other night, had to capture it...
-
home gardening?
Old people say the darnedest things. Of course now those same imperialist Asians make some of the best stuff .
-
Range Ear and eye protection
I have had Howard Leight electronic ear muffs for going on 12 years now. They are a little beat up but work just fine. https://ads.midwayusa.com/product/1805652370?pid=671923&utm_medium=shopping&utm_source=google&utm_campaign=Shooting+-+Ear+%26+Eye+Protection&utm_content=671923&gclid=CjwKCAjwr7X4BRA4EiwAUXjbt3XxMfSgvrTjG6KtkRKqQ6ERU1x5PSoLtf-oeSA-f5NFwUGGWvfOQRoCRwsQAvD_BwE As for eyes, I wear glasses normally, so I don't use anything but that. Never had an issue in over 40 years. Not saying it's not possible, I've just never seen anyone have an issue. Even saw someone(well, the aftermath) have their rifle do a daffy duck split and curl back and nothing hit their face. Shrug.
-
home gardening?
My ancient neighbor(long dead) called them Tojo beetles. Probably old enough no one would even know why that might be offensive. After all, all these protestors are ignorant of history before they were born. From Wikipedia 2050
- *delete me*
-
home gardening?
I think the .300 Weatherby is the best. Ole Painless. You might hear it from your house though.
-
home gardening?
First time I've seen that one and I was 150 miles away at the time CB cabs are really quiet too. I did a video on that some time ago.
-
home gardening?
So I have been at our house in Florida since the 19th of June. We got back YESTERDAY at around noon and two of our trays of lettuce were destroyed. ALL of it was eaten down to the base. It was just ready to to harvest too. Roughly 2.5 hours before we got home this rodent decided it was his lettuce. Little shit!
-
Protest bumper
The truck was still there when we pulled out this morning and it had an Indiana plate on it. Maybe they have a lot of Deer where the guy lives or perhaps purple-haired screeching protest cows.