Everything posted by Malsua
-
Protest bumper
So this is the third truck I've seen with this cow catcher. I'm just outside of Richmond right now. I'm sure it's not new, just making my conspiracy wheels turn.
-
Flaky Computer Was The SSD
I have an _EXTREMELY_ disk intensive process for press ready rip files. Each imprint file is 27-35mb and each run is 5k to 250k imprint files. It runs through an ONYX RIP on a very fast machine with Samsung M.2 pro drives and ripping can take 8-12 hours for the big jobs. The rip internally probably creates 2 temp files for each imprint although they may get created on the OS drive not the working drive. Granted, it doesn't run big jobs every day but 3-4 months a year, it's chugging at least 8-12 hours a day. After about 18 months, I checked it, thinking I should consider replacing it due to the volume. It had only written 65TB. I believe the warranty on those is 800TB written so under 10% usage. The only reason I replaced it last year was that the motherboard failed and I upgraded the whole box. I put the m.2 in a desktop and while I don't remember what the actual written value was, I remember not being alarmed about it so I put it out to pasture where it can lazily provide maybe another 1TB for the rest of it's days.
-
Flaky Computer Was The SSD
I've got two piles of dead drives at work. Hard disks on right, SSDs on left. The hard disks is actually 3 piles, each containing 12-15 and next to it is a smaller pile of laptop disks counting a dozen or so. On the left there are two SSDs. I will continue to install only SSDs in working machines unless the ratio starts to change. I do install spinning platters in servers, SANs and NVRs just because of the space requirements. Even our AS/400 though has stacks of SSDs as the working storage but it archives out to platters during the backup cycles.
-
Flaky Computer Was The SSD
I've had two SSD failures. One was flaky, just random nonsense. That was a 120gb Sandisk SSD and I stopped buying those after that(probably 6 years ago). The other was an M.2 Samsung 860 Evo. Could see that one in the bios, couldn't see it to install the OS. I've installed hundreds of SSDs at this point and everything in the last 3 years has been solid.
-
WTB Used Car
I don't have anything for you other than to say you're on the right trail. A friend found a car through Hertz recently for a smoking deal and the car was just fine. Sure, probably driven like hell, but it's fine now, shrug. https://www.hertzcarsales.com/
-
Installing a Flume
It's a LaView wireless system. I still have to run dc power to the cams. I have 3 LaView systems. One at work, one at home in NJ and this system with 4 1080p cams I got for $200. This is at my home in Florida where I'm at right now. I bought a 4tb western digital purple drive for it for about another $100. I built a 72 camera system at work on 4 NVRs. I have some experience with setting these things up but it's not rocket science.
-
Installing a Flume
Yeah, couple sharp ones cut my hand a bit. No worries, I healed.
-
Installing a Flume
It's Florida. Rain is frequently seasonal.
-
Installing a Flume
You don't see the bushes right next to the sprinkler head?
-
Installing a Flume
A flume is a device that monitors your water meter and tells you in real time if water is being used and how much. It will alert you if there appears to be a leak. I was walking out to the meter I found a sprinkler head :). Under the bus I go. Some Thursday morning comedy at my expense. You're welcome.
-
Stealth Cruiser?
https://findbyplate.com/ There are a bunch of them, that one is pretty fast. I stumbled into one that would give you the registered owner and street address but it stopped working a while back. I'm quite sure there is a pay service that will give you that. I know some LEOs and a FHP Trooper and they file a form to get their plate blocked so they can't be found. I know also that if a cop runs the plate, it comes back as blocked indicating a government official of some sort.
-
Stealth Cruiser?
I'm being crowd stalked. There are people out on my lake, 24 hours a day watching my house, I get followed everywhere!. Oh, wait, nevermind that'd be the crazy cat lady down the street who yells at cars that has delusions of stalking.
-
Stealth Cruiser?
Yeah, no returns on the plate. I think that seals it.
-
Stealth Cruiser?
Probably headed for the bridge considering how early it is. As long as you can be at the GW by 630, you can get across without too much of a fuss. Much after that and it starts to get wonky. Doesn't have a fed plate and it is your basic NJ plate. I should probably look up the number and if I can't get a hit, he's definitely LEO. Let me do that now...
-
Stealth Cruiser?
So this morning the Stealth Cruiser is back. It also has lights in the rear window. I've zoomed and changed the contrast, hard to see though. When this guy caught up to me on RT208, I was going a speed that rhymes with Matey. Notice how much he surges back and forth while behind me. He's got a lead foot and just really needs to express it.
-
Stealth Cruiser?
Yeah. I used to have one of those vehicle when I was in College. A blue LTD with all the police stuff except the badging. The University food service bought it from the motor pool who took the decals off. It was totally awesome driving it around. One of the girls in my class saw me in it, thought I was campus police. We hooked up later and only afterwards did I let her know I just work for food service as a programmer. heh. Said to me through the window "Hey you're out of uniform!" "Yeah, my day off!" with a laugh. Hard to believe that young little cutie is a menopausal 50 something now. heh.
-
Stealth Cruiser?
He didn't have radar or laser, the V1G2 would have alerted and I didn't see any gear in the vehicle. The only way to be sure to as to my speed would have been to follow me for a period of time. My paranoia kicked in and as he approached, I took my foot off the gas and was under 80 when he was on me. At worst he could have estimated my speed and probably didn't care one way or another. He just wanted me out of the way and I obliged. I also get a little wonky when I see a white/black explorer as that's what they run in Vernon. I do distantly know a couple of those guys, I may have an out if they ever stop me again.
-
Stealth Cruiser?
My only complaint is that it can take a bit to get down to a passing gear if you're not in sport mode(i.e. Normal or Economy). Stand on it and....nuttin. Of course the engine then gets up into the V6s VTEC range and it's full HP potential about the same time the trans is in gear. It kinda feels like when I'd tag the nitrous button on my race car when I was tooling along in 2nd at about 70mph. A roar and you're off In sport+ mode with the rev matching it's insanely fun to drive. It keeps the engine way up in the RPMS and throttle response is outstanding. I got 37.5 MPG on a 525 mile trip to Ohio. I get around 30mpg for my normal combined travel. Not bad for a 290HP luxury vehicle.
-
Stealth Cruiser?
Acura TLX. It uses the same 9 speed ZF transmission as Jeep Cherokee, for some recent years anyway. It was replaced once at 29k, but that was due to a mfg defect with a bad gasket that allowed coolant into the trans oil. It's been fine ever since. Currently 109k on the odom.
-
Stealth Cruiser?
I didn't want to make eye contact just in case I saw a broad billed trooper hat ;0 That said, I feel like you're either identifying a stereotypical local hero or someone in particular I'm not familiar with but either way I know "who" you are talking about. I was at the end of my driveway and wanted to turn in and the guy above refused to let me move my vehicle by turning in. They were on a call at the neighbor's house as the fire alarms were going off. Literally 15 feet and actually would have gotten my car out of the way. douchebag control freak.
-
Stealth Cruiser?
I've been working this entire time and speeds are definitely coming down now that that non-essentials are back. I don't think I can emphasize enough how fast that guy was going. There was a 25mph, at least, closing speed on me. My vehicle has 9 gears. At 80mph in 9th, the engine is at 1800RPM. Each 200rpm is about 10mph. The engine was doing 2400RPM. Maybe it downshifted, maybe it didn't , either way the guy was still gaining on me.
-
Stealth Cruiser?
I suppose, but the guy certainly has no fear of traveling 110+
-
Stealth Cruiser?
When I notice someone gaining on me, it gets my attention. This is mostly because I'm usually not the problem as far as left lane slow pokes. So I see this car coming, so I sped up. I sped up _A lot_ and it still gained on me, so I had to wait to pass a car in the middle lane then I moved over(moments after this clip ends). He was doing well over 100mph. I noticed what looks like a red/blue strobe around the passenger visor. I don't see it on the driver side I don't see any additional antennae Do PDs buy the Ford Focus? This a detective car or just a local hero fire dude or something? It just struck me as odd.
-
Question about home blueprints for adding an addition
It's possible someone renovated and removed a load-bearing wall. It takes a LOT for a house to fail, but when it does it tends to go all at once after some warnings. Sag-sag-sag-collapse. I mean, that exact thing happened to my old kitchen. The rim joist on our galley kitchen rotted, sag then one night with a bunch of snow on our deck, it let go. That was 2002. The entire room sank about 6 inches on the one side. I ended up putting double 2x10s and new piers under the old rim joist. Jacked it up and it stayed until the entire kitchen was removed in 2017. There was a "ridge" down the middle of the kitchen floor where the old center beam was.
-
Question about home blueprints for adding an addition
You should have someone inspect it. It's possible there is termite damage or something that has weakened the floor joists. A 50 year old house should not really be sagging. I lived in a 150 year old house and there was some sagging, some plaster cracking and all that, but it was in the middle 16inch square beam that ran 30 feet. You're sagging sounds like the opposite, the beam is solid, the other end of the joists are not! Odd to say the least. A InterNachi certified inspector can give you some insight. It'll cost a few hundred bucks.