Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Malsua

Members
  • Joined

  • Last visited

Everything posted by Malsua

  1. Persons who have demonstrated a willingness to hurt themselves(cutters, suicide attempts) or others or who have been involuntarily detained on a mental health hold shall be prohibited from purchasing any knives of any length for any purpose.
  2. The background checks thing was explained in the article, that Staff members purchased guns and then sold them to people. If I sold you a rifle, would there be a background check? No? Then what's the difference? If the staff members bought the guns with the intent to resell to someone, that's a straw purchase and they would have charged the staff with it. If the staff members had sold them to prohibited persons, they would have been charged. This is the same as the "gun show loophole" or the "Diner Loophole" or the "Bowling alley loophole" or the "Office Water cooler Loophole" or the "NJGF Loophole". Record Keeping is often nitpicks on paperwork.
  3. So now we know why they moved the guns. SARCO figured NJ was ultimately going to seize their inventory and bankrupt them so they couldn't fight back legally. Someone in the NJ legal system was looking to make his name over the corpse of SARCO. Can you see the campaign commercial? "He is tough on crime, taking down a notorious gun dealer that was selling guns illegally". Besides, how is it illegal to move the guns to Pa? They could have shipped them to an FFL in PA, so if anything this is even MORE legal, if that's possible.
  4. Semi-auto what? You're talking about a pistol? The #1, one shot, one stop cartridge is the .357 magnum, which is a revolver round of course. You can get a laser on most common handguns, some come with the grips like a Crimson Trace grip or they are integrated like the the Smith & Wesson Bodyguard 380. Others can be added to an accessory rail. As for caliber choices, 9mm or more powerful but without going overboard. Some calibers, like 10mm are too much when you consider it's a light but adequate round to kill smaller bears. Choose between 9mm, .40 and .45. If you're not going to shoot it much then ammo cost isn't an issue get a .45. I'm of the opinion that Glocks, Sigs and H&Ks are the only guns I consider as failproof. Other guns can also do just fine, but those three brands will almost always go bang when you pull the trigger. I'm not a fan of Glock ergonomics but mechanically they are rock solid. Everyone has an opinion.
  5. There is no REQUIREMENT that you live in AZ 7 months of year. It is simply one criteria of many, the preponderance of the criteria qualify residency, not necessarily any particular one. I posted a perfectly legitimate way to be a part time resident of Arizona.
  6. Re-read the article about it. A vendor I work with owns a business in Florida and has a house he bought to fix up in NY, near Geneva. He's been casually trying to sell the house, now he's now a very motivated seller. If NY wants to tax his business in FL because they've deemed him a permanent resident in NY it could cost him tens of thousands of dollars or more.
  7. Ok, I posted the AZ residency statutes above. I own a business incorporated in AZ, I have a home in Arizona that I stay at, one week of four, I qualify as a resident of Arizona and I spend the other 3/4 of the year in NJ, so I qualify as NJ. You're parsing words. It is in fact talking about state residency which is a requirement for purchase of a handgun for delivery in that state. Let's not get into the definition of what is is.
  8. I can't speak for BA, but I can guess. Suicidal, depressed people don't tend to involve others in their final exit.
  9. Simply not true. http://www.atf.gov/firearms/faq/unlicensed-persons.html#state-purchase
  10. See, that's the thing...I really only want 1/2 to 1 can. I don't imagine I'll ever shoot my CZ52 that much. It's mostly to have a some ammo that I can burn off over time and I've never shot more than 50 rounds at one range session. With 8rnd mags and the gun breaking every time, it just never gets done. heh. Actually, since putting that firing pin that you suggested it's been great the past few trips out.
  11. +1 Uplula. Had it for years, I don't come to the range without it.
  12. The upper management at Goldman sucks should be drug out in shackles and hanged in the street. Thereafter, the building should be imploded and the ground below salted. The computers should be erased and any former member should be exiled from any government position.
  13. Yeah man! Only the government should employ people! Cut open that goose, there's endless golden eggs in there!
  14. Did you happen to stop over at Washington's headquarters? I went to the Design2Part show a couple years ago and Valley forge park is right there. Since we were done with the show early, we drove around the park. I was there 30 years prior and it had thankfully changed little except for the superfund cleanup. I have to think that Washington probably stood next to the house and looked up to the various troops camped up on the hills around the house. It's just one of those "wow" moments for me. It sort of brings all the history to life.
  15. Hi, Welcome.
  16. If anyone is is making a purchase of this and wants to split shipping costs, I'm in for a can or half...whatever, let me know.
  17. Absolutely. I specifically went to the local shop(Mastadon) to buy my AR because I want those guys to be around. I realize my purchases aren't much, but I try to throw business at them when I can. The price I got was probably BETTER than buying online as well.
  18. I'm not a MIM hater. I deal with industrial machines that run all day, every day. I'll take a piece of stress relieved machined aluminum over a MIM part, given the choice. It really depends on the function. For a non critical piece(a takedown lever is not critical to primary function), it's perfectly fine. I'll give you a recent example. We have some industrial printers. They have a clean and purge station that the heads move over to and then a peristaltic pump is activated that draws ink from the head. The problem is, the motors that drive the pumps have gears with a long flat blade from the hub that inserts into the pump to turn it. These gears are MIM and the blades brake. It's a half day job to disassemble/reassemble the entire mechanism to replace the gear. After the third one failed, I "Re-engineered it". I milled the hub flat, drilled two holes in it and inserted some roll pins. Now it doesn't break . I was even considering sending the gear out to one our shops to entirely make it from scratch. What a pita.
  19. Contact Mastadon. I'll bet you'll get a competitive price. Stores charge what they can because most people don't want to deal with buying online or are even aware that they can.
  20. I don't follow Kahr's but is the takedown lever subject to falling apart because it was metal injected molded? A gun with lots of MIM parts is clearly inferior to one without, but if it's just for takedown...who cares.
  21. How about that Sig P290?
  22. It's an issue of competing interests. The corporation does not have your best interest in mind, it has its own. You on the other hand, in a life or death struggle should not be required to relinquish your right to life so that a corporation doesn't lose any money. I recognize that it's easy to make a situation worse, but don't tell me I have to sacrifice my life to some hump just because the corporation doesn't want to lose a buck.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.