Everything posted by Malsua
-
Wrong Way driver
So I was driving home from Ohio this morning and there was a wrong way driver on the interstate. The cops had apparently just shut her down. Since they were both backwards as well, I must assume they were chasing her. As a side note, the Acura got 35.7Miles per gallon on the way there and just short of that on the way back. I think that's great for a 290HP machine that runs a solid low 14 1/4.
-
$58.85 projectile
I had a G1W for about 15 months. I upgraded to a DOD 330W because it has superior night vision vs the G1W but the G1W is still a great cam.
-
$58.85 projectile
That's sorta what it looks like to me as well. In the original, I can zoom way in and see it well before it's obvious in this vid. Maybe I should try to enhance it. See here:
-
$58.85 projectile
Dashcam . A G1Wc will run you about $60, $10 for a memory card and you'll never lack for proof.
-
$58.85 projectile
This particular spot isn't big, but It's going to get some miles(1000+) on it before I can get it looked at.
-
$58.85 projectile
I'll try to get to Safelite next week since they don't have any appts this week. Maybe they can fill it.
-
$58.85 projectile
My insurance for comprehensive goes against deductible. My deductible is more than the windshield so I eat it.
-
$58.85 projectile
It's possible it can be filled but it's already started to spider out. This Acura has thick glass and sound deadening so I'm going to just eat it. Totally sucks. My Subaru needed a windshield about a year and a half ago. It's just unnecessary expense just to get back to normal.
-
$58.85 projectile
Right into the windshield. I'll say this was really loud, a lot louder than the dash cam audio would suggest. I can't really tell where it came from. It came from the right though, not in front. A .22 ? Probably not, but it sure did a number on the windshield. I'll have to replace it because the spot is in my line of sight and it's fricking annoying.
-
Court says 2nd Amendment doesn’t trump NJ’s strict gun laws Read More: Court says 2nd Amendment doesn't trump NJ's strict gun laws | http://nj1015.co
Here's something we already knew. Of course, prima facie, this is incorrect. NOTHING trumps the bill of rights. Imagine if a state just decided to ignore Roe V Wade? It's not even in the bill of rights. Cities would burn. How about a better comparison? What would happen if Utah decided to ban Islam? Do you think little bullshit websites would post "Court says 1st amendment doesn't trump Utah strict religion laws"? --------------------------- http://nj1015.com/court-says-2nd-amendment-doesnt-trump-njs-strict-gun-laws/ A Bergen County man has lost his bid to fight the confiscation of his guns and ammunition following a domestic violence arrest and charges that he had high-capacity magazines and hollow-point ammunition. An appellate decision on Tuesday upheld a Superior Court judge’s earlier ruling that Arthur Vinogradsky was no longer qualified to be a gun owner even though the charges against him were eventually dropped. It’s the latest example of New Jersey’s gun-control laws, which are among the strictest in the nation. In New Jersey, residents must apply to their local police departments to obtain permits to buy, own or carry firearms and must meet a list of criteria before they can be approved. Few residents are granted carry permits. This month, the appellate division denied a Middlesex County man’s application for a gun permit just because of his terrible driving record. NJ man denied gun permit due to ‘atrocious’ driving record http://nj1015.com/nj-man-denied-gun-permit-due-to-atrocious-driving-record/ Earlier this month, a Superior Court judge in Monmouth County denied a soldier’s request for a carry permit because he couldn’t prove “justifiable need” even though he worked on a military facility that had faced terrorist threats. Even soldier working under terrorist threats can’t get gun carry permit in NJ http://nj1015.com/even-soldier-working-under-terrorist-threats-cant-get-gun-carry-permit-in-nj/ In June 2013,Vinogradsky’s wife got a temporary restraining order against her husband. As a matter of course, police removed the guns from their home. As the weapons were removed, police arrested the defendant for possession of high capacity magazines and hollow point bullets. The wife later dismissed her complaint and the husband completed a pretrial intervention program, which spared him a criminal conviction on the weapons charges. But the judge moved forward with stripping him of gun ownership rights, finding that he assaulted his wife and committed a crime. The decision acknowledged that the Second Amendment guarantees an individual the right to possess a handgun for the purpose of self-defense. But according to the courts, the Constitution does not trump “states’ enforcement of their ‘longstanding prohibitions’ on firearm possession,” and “like most rights, the right secured by the Second Amendment is not unlimited.” The appellate decision faulted Vinogradsky for his “unwillingness to familiarize himself with our gun control laws.” Officers testified she had a splint on her finger and said she was “a little scared” at the police station. In the police report of the incident the wife told police her husband tried to pull her engagement ring off her finger which caused bruising and strained the finger.
-
Stuck hex screw on savage 111 bolt :/
If it's stuck, drilling and tapping may end up being the only option. Shrug. Worst case you buy a new bolt. Does it really need to come off anyway? I do fine work with machinery as well as car stuff and sometimes you have to end up leaving something alone until it grenades then you replace the entire assembly. If heat isn't doing it, and a good soak doesn't help...there's not much left.
-
Stuck hex screw on savage 111 bolt :/
I have had heads of bolts strip or twist off. I've welded a different bolt to them and that always works but in one case, I drove the next larger bit into the hex head and used JB weld to hold it there. Once it hardened, I used a bigger wrench and was able to get it out. If the head isn't messed up, I agree with the above. Soak it. You can always drill it out later.
-
Vent Hood re-direct
We built those newel posts out of 1x6 boxed, some outside corner and some clam that I ripped the edge off of to make lath. They are hollow, bolted to the floor and I've bolted the railings on the inside. The wife likes craftsman style wood working so she took cues from that and we made it our own. She was fully involved in the process, so I can't take all the credit. I do all the cutting and fastening though. It took me a minute to figure out what you meant. Heh. There's an optical illusion going on here that I hadn't noticed. There is a structure under the stairs that forms a closet. The pic below should clear it up. As to the delta jointer...yeah, I'm interested. One of those is probably what I used to use in the old cabinet shop. Big ole cast iron beast? My only issue is that right now my truck has a throttle problem and until I can figure out what the problem is, I don't want to travel too far from home in case it decides to give out. I'm going to clean it this weekend, replace it if it still fails, then I'll have to get the PCM replaced if that one still fails. It's an intermittent problem, so it's hard to pin down. The funny thing about all these pictures...the trim isn't done, nor is the staining...I guess I should run around and get updated pics of everything.
-
SA vs. DA/SA handguns
I get 404 on the link. That said, I like having the round chambered but no loaded hammer or striker behind it. You have to want to shoot if you have an 11+lb trigger. Less accurate? Yeah, probably. So it goes.
-
Trenton legislators to raid our pockets even more
Yeah man, recycle your own salmonella, e coli and noroviruses! http://www.huffingtonpost.com/2013/02/07/plastic-bag-ban_n_2641430.html "Plastic Bag Ban Responsible For Spike In E. Coli Infections, Study Says" The real answer is sustainable paper bags, you know, the ones we used before tree huggers forced us into plastic bags.
-
Interesting Article Today in Nat'l Review re: NJ Gun Law
Good article, although that guy would be happy if they just extended LEOSA to him. I guess "I got mine" is enough for him. Oh well.
-
Vent Hood re-direct
Thanks! I used to work in a cabinet shop in the early 90s and I did all the interior trim after our remodel in 2012. I have a lot wood working tools including routers, a radial arm, table saw, chop saws, hand saws, band saw, nailers etc, although I'd like to get a planar/joiner. I'm probably most proud of my railings. or you can look through our construction blog http://thewellrats.com/malblog/ A contractor did the framing, insulating, electric, sheet rock, roof and plumbing. I did just about everything else myself including putting in the hot water baseboard, pex and furnace, ran the gas lines and trenches, painting, staining, interior wood walls and crown, all the window trim, interior doors, etc. It was a big job. As far as the box..it fit all the way through to the back of the vent hood and just kisses it. The other piece that's attached to the hood fits inside it. I couldn't have asked for a better fit, it was exactly the right length of about 5 inches. My wife built that kitchen before I met her. They are definitely unique handles. We had trouble locating a replacement some years ago.
-
Vent Hood re-direct
Finished it up on Sunday. Came out pretty good. I tried some new sealer, Lexel and I'm not sure I like it, the stuff is impossible to remove once it's applied. I guess it bonds well and probably works well, but it's hard to make it neat since you can't clean it off.
-
Vent Hood re-direct
Saw it in IMAX 3D. Good movie, very enjoyable. I'm not entirely sure it was worth the $55 ($34 tickets + $21 in junk food) but I enjoyed it all the same.
-
Vent Hood re-direct
I have varifocal glasses. I'm used to holding my head still to see stuff. That said, I've done 3d at the Kinnelon movies and Imax 3d at the AMC theatre in Rockway and the one in Rockaway is far superior. Kinnelon probably uses tech from the 1950s because it doesn't say anything about realD , just 3d.
-
Moving to NJ. Shipping my collection to myself?
Gun Roster? Ammunition limits? All sales must go through FFL. There's more, those are off the top of my head.
-
Vent Hood re-direct
We do most of our machine modification work with aluminum of various types, so there's tons of scrap laying around. We also drill and tap where possible so everything is right there. Having a steel bench, unlimited air, vices, band saws, sanders etc. is very helpful. If I had done this at home, it'd probably look like drunk lemur's made it.
-
Bushnell TRS-25 on 870?
Not the same comparison by any measure, but I've got a TRS-25 that's getting bashed around on my AR and it hasn't fallen apart yet. It also seems to hold zero pretty well. I say give 'er a go.
-
Moving to NJ. Shipping my collection to myself?
The ATF has specifically stated that it is legal to ship to yourself. https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&sqi=2&ved=0ahUKEwip9smvttnMAhWC4D4KHRsrCFEQFggcMAA&url=https%3A%2F%2Fwww.atf.gov%2Fresource-center%2Fdocs%2F0501-firearms-top-10-qaspdf%2Fdownload&usg=AFQjCNFIi9IKsXWVpooTCwr-eKSngfg9lw&sig2=BwSgq6u_TeIppb9aV_093w&bvm=bv.122129774,d.cWw&cad=rja "6. May I lawfully ship a firearm to myself in a different State? Any person may ship a firearm to himself or herself in the care of another person in the State where he or she intends to hunt or engage in any other lawful activity. The package should be addressed to the owner “in the care of” the out-of-State resident. Upon reaching its destination, persons other than the owner must not open the package or take possession of the firearm." The issue is that the common carriers require that you declare them and then they won't ship them. That said, who cares what their rules are. It isn't illegal. It's just a company policy. As for NJ being more restrictive than CA, you've apparently not kept abreast of the laws in CA. They seem to be getting worse every month.
-
Vent Hood re-direct
IMAX 3D will help a bit too. I just hope it's not stupid crowded.