Everything posted by Malsua
-
Anyone have a DRB III or Snap-On scan tool?
Yeah, I couldn't find them in any of my resources. Maybe they are the tech's dry clean tickets.
-
Tom and the girls
Out for morning breakfast... Shot through a screen so the image is a bit soft.
-
Vent Hood re-direct
Thanks, but this was a one and done. It's going to rain tomorrow, so I'll cut into the house Sunday. I think I'll go see Captain America tomorrow.
-
Amerigeddon - New movie in some theaters starting tomorrow
The author, Dr Forstchen recently gave a talk at a self reliance event. The vids are interesting. The 11 part videos can be found here(each one is 5 minutes or so): https://www.youtube.com/user/davidzdavid/videos
-
Vent Hood re-direct
Ducting is always a pita. That said, I have some left over metal duct tape from when I replaced the broken plenum doors in my Dodge truck. Good idea, I'll use that.
-
Vent Hood re-direct
Thanks, it was the morning project in the shop as we drank coffee. As for your question, either it's cheaper not to bother or someone isn't paying attention. I can tell you that now that I've pretty much rebuilt my entire house, I scratch my head at the way things were done. Things that could have easily been done during the building process were done ass backward or simply just slapped together.
-
Vent Hood re-direct
Yeah, a little. The bigger pain in the ass is that no one sells one that exits that way. I can't be the only person in the country that has something in the way of directly venting out the rear. If I went out the top, I'd end up going through the cabinents(rendering them useless) and then I'd have to go to the side anyway because It's right under the ridge beam as well. I figured what the hell, it's just sheet metal, it can't be that hard to change the air flow.
-
Vent Hood re-direct
So I spent a couple hours this morning re-plumbing a vent hood. I set the damn smoke detectors off every time something starts to smoke in the broiler or oven. It's been annoying me for years. My house is post and beam and directly behind the vent hood is a beam. I can't go out the top either so I bought a new hood from Lowes and decided to direct the vent off to the side of the back. I used some U-channel and a piece of 1/8 aluminum. I ground the hole open with a pneumatic grinder, a few cuts, tap in a few bolts and viola. I think it came out pretty good. I'll run some sealant on the seams tonight and then I just need to open a hole to the outside, shove the parts through and hook up the wiring. woot.
-
George Zimmerman's gun up on gun broker
Now they have the publicity without the notoriety. They get their cake and eat it too.
-
Anyone have a DRB III or Snap-On scan tool?
Thanks!
-
Used Pickup Recommendations
I'm going to do some Por15 for the oil and tranny pans as well as whatever I can get a brush on, I just need some time this summer. That stuff works great. I am the 2nd owner on this truck and it sits a lot. I painted the new calipers that I installed, but the old one were beyond repair. The salt up here is brutal and it probably doesn't help that I push snow with it.
-
A wife scorned.
If the title is in her name, why would she sell it for 1k? Take it to a carcash, or whatever and get wholesale for it, no questions asked. This story is complete bullshit.
-
Used Pickup Recommendations
My '04 Ram looks beautiful on the top, but underneath it's pretty rusty. I just did a brake job. 4 calipers, 4 rotors, pads, all 4 rubber brake lines plus the rubber line to the rear axle, main brake line from front to back, lines from the MC to the anti-lock module and the line across the rear axle. The one rear caliper was rusted solid. I literally was beating it with a 2lb and huge punch to get it off the bracket it had rust welded itself to. I also had to use a giant gear puller, heat, pb blaster and a hammer to beat the rotors off. It took about an hour a wheel just to disassemble. It was a rusted mess. Of course then the throttle flakes out..ugh.
-
Any Subaru owners?
My wife's Honda uses 0w-20 and full synthetic is only about 7 bucks a quart. I guess you took it somewhere? I bought an Aluminum skid plate for my WRX with holes for the plug and filter, so I just drove it up the ramp, drain, swap filter, fill and go. 15 minutes tops. I drive 80 miles daily and my issue was I couldn't stand to drive something with under 200hp but I still wanted decent gas mileage. My Acura TLX V6 gets 30mpg combined and has 290hp, due primarily to direct injection and variable cylinder management. Full highway, driving out to a range in PA for example, I get 35mpg. Again, I liked my Subarus, the mileage for the available HP was lacking.
-
Anyone have a DRB III or Snap-On scan tool?
ELM327 or other DTC scanners don't read PCM or other module codes. I'm talking about scantools that interrogate the various engine modules and whatnot. They start at about $1000 for an Autel Maxidas and go up to $10k or more for a high end Snap-on or other reader.
-
Used Pickup Recommendations
The only problem I see for you is that ANY car that costs less than $6k these days is either a mechanical problem on wheels or has at least 150k miles on it. 150k miles isn't so bad if it's been in Florida, but up here, that's a lot of salt. I was going to suggest a 4th Gen Toyota 4Runner. They have 5k towing and extra seats. It won't kill you on repairs and will go 250k miles with basic maintenance. 3rd Gen(2001 and earlier) had severe rust problems as well as some up to '04. 2005 and later shouldn't have any issues.
-
Anyone have a DRB III or Snap-On scan tool?
For what it's worth, someone(the tech I assume) left a piece of cardboard on the seat with some codes of some kind on it. I don't recognize the code numbers, nor do I see them in a Google search. If anyone has any thoughts, maybe these are what he pulled out of the DRB III or whatever tool they are using now? I've never used one, no idea what it spits out.
-
Anyone have a DRB III or Snap-On scan tool?
Yeah, thanks. I get to Cherry Hill as the in-laws live there, but rarely with the truck and right now I don't want to be on the side of the road 100 miles from home. I think I'll try disconnecting the battery next time it happens and see if I can get it to reset itself. Clearly, sitting on the lot for a day did something or maybe it was just the 4th restart that reset it.
-
Anyone have a DRB III or Snap-On scan tool?
I was recently driving my 2004 Dodge Ram 2500 5.7l and the electronic throttle control lightning bolt flashed and the engine dropped to 1100RPM and held there. I pulled off, turned it off, re-started, same issue. I tried to do a re-learn on the side of the road with no success. I was about 1/2 mile from a Dodge dealer, so I creeped it there at 6mph(getting flipped off and beeped at) and left it. They called and, typical of a dealer said "Well, it looks like your plugs and wires need replaced, you've got an upper ball joint that's loose, you need a new tranny pan ...." And???? These guys didn't seem to understand that the frickin truck had a crippling throttle problem and I asked "No we didn't find any problem with that, let me call you back". "Comes back with 2 codes related to the PCM, we can replace it for $680 for the PCM, $180 reprogramming plus whatever I owe them on a diagnostic. No thanks, whatever had failed, was now working, so I went and picked it up. A reman throttle body is $130 and a reman PCM is $289. $680 is insane. If they'd come at me with a realistic number I would have probably let them fix it. They also "lost" my keys, or claimed it was locked in a tech's toolbox. I asked for a discount off the $135 diagnostic bill since they can't find my keys and they gave me $25 off. I went home(9 miles), got another key and found they'd locked the key in the truck. Anyway, I know Dodges tend to have throttle body issues and I'll probably clean it and maybe even just replace it. I tried to use an Autel Maxidas DS708 to pull the codes on the PCM but for whatever reason the tool just hangs. It might be that particular one needs an update. I was hoping someone with either a Chrysler tool or snap-on would could scan it for codes. I suspect I have a bad connection somewhere or maybe the throttle body is just flaky. It would be nice if someone is in north Jersey somewhere that could scan it for me. I'm also open to suggestions.
-
Any Subaru owners?
I've owned 2 Subarus in my life. Both were great cars and while I recently bought a new car, my choices were down to either Subaru or the Acura, and I ended up buying the Acura. One of the things I really wanted was Eyesight on the Subaru. The problem I had was that the HP and MPG weren't where I wanted on the Subarus. My Acura puts out more HP(290) and gets 3-4 more MPH with a better interior and ride. That said, it was more expensive but not by a huge number. Every time I car shop, I'll definitely look at Subaru and a good set of all season tires is enough for the winter(Continental Extreme Contact DWS). I had to get snows for my FWD Acura but I live up in the hills. My WRX was very reliable and I ran it 127,000 miles before I sold it. It had no major mechanical issues and would have run another 150k easily. Someone upthread mentioned they are hard to work on? I have worked on a LOT of cars in my life. Hondas are easier than Subarus, but everything is possible on a Subaru. Try working on an Audi or VW if you want hard to work on.
-
Why We're Doomed
Well, it wasn't me. If they come to your house, your choices are, give them your guns or probably die horribly, along with your dogs, your family and your property will likely get burnt to the ground. If they show up at my door, they can have 'em. My point was that if they are there and you have guns there that you wanted to keep, it's way too late to do anything about it then.
-
Why We're Doomed
Yeah. If they come to your house and you have guns there, turn them in. You have failed in your duty. Your duty is to document them when they come to your neighbors house and to out the fascists. While the jack boot is out raiding, his defenses are small. “So in war, the way is to avoid what is strong, and strike at what is weak.”― Sun Tzu, The Art of War
-
Holy Seattle Batman!
I figured this thread would be about a Wrestler or some other nom de guerre, named Holly Seattle. I agree. It's essentially been raining for 2 weeks solid.
-
Why We're Doomed
Did you know, Hillary has a vajajay? Yes, yes, I realize it probably really isn't one anymore, having closed up shop some 30+ years ago, but it's still the same rough outline. Kind of like how a desiccated corpse was once a human, hers is like that and probably smells the same. Anyway, that means that all of her negatives are meaningless and women will for vote her because they have the same parts.
-
Why We're Doomed
Hmm, to someone who doesn't know better, the broken one works just fine. $300 buckeroonies for some scrap metal sounds like a deal to me.