matty

:shock: Ummmmm, yeahhhhh------I was thinking more along the lines of an ammo or gear place, or a brewery-type place or some kid-friendly diversion for a few hours. Whilst a porn shop might interenst me for awhile the wife'd be annoyed at having to watch the kids

I won't lose any sleep if he croaks, save a lot of expense

I am driving up to NH this weekend, to the Bristol area, anything of not to do/see there? I will have the family (wife doing marathon there) and will be heading back to NJ Sun AM

Best Advice: Keep the guns and don't move to NJ!

Texas, GA, FL, SC, AZ, NM or even PA. NOT MD or MA or even VA anf fughgeddabout NY & IL

Hm, I may try the brass balacing thing or some other thing to balance on the slide. Not a rimfire handgun, 9mm & .45, but I do better wth the SAO trigger on the .45. Also reead an anticle that it's a mental thing, will also 'visualize making goood shots'. And of course the sure cure, shoot a lot (like when I have time :| Also found some technique that uses a pencil in the barrel, might try that. I can't go around the house drawing & dry firing in front of the wife kids & MIL--actually that sounds perv-ier than jerking!!!

The trigger on my handguns, just to clarify I cannot seem to completely get rid of it, esp. with the p226 and its long trigger pull. The 1911 I do a bit better, but still consistently down & left. Have read everything and dryfired daily sometimes, but stil takes me a half-box or so to get even on the target at 9 yds. Any suggestions/tips that worked for you all for semi's?

Tim-- Thanks, Sundays in Oct are bad for me, but will still try & make it, may be later in the day, will update. Really looking to try a few out, before making up my mind.

Hm, I am wanting a shotgun anyway, so all these post lately on them has got me thinking. Pump? O/U? side bu side? Semi? Expensive? Cheap/moderate? What's best for clays? I have not shot skeet/trap in many years and even then was rare, with borrowed guns. HD aspect not so much, have small kids, so the dog is the first line of def. Not a hunter either. I have seen Stoeger in Dicks and some forumsters have commented on them as OK, not as nice as Berettas or Brownings, but certainly much cheaper. Appropriate for first shotgun? I have been advised an 870 or 500 would be a good choice, not debating that, but any reason not to go with an O/U in that same price range, then trade up later?

Welcome. Where do you shoot indoors? Now I will have to go get me a USAF avatar to counter alla you jar-heads

Wawa sammich chips 2 pears 2 plums grapes and an apple

OK so that bit of Lakewood is a actually pretty good, typical suburban development 3-4 BR houses not sure how heavily Orthodox it may be. The guy still may be a gangbanger/illegal or both. Seems from the news reports there was a gaggle of LEOs out there and LPD was the point men I guess its because they are the locals? I dunno how that works. I would hate to see if this guys was a customer of BA or SS in Lakewood iI he was under the ATF microscope he must have been suspected of illegal doings with weapons somehow. Will have to see how it comes out---hope the LPD guys come out OK

Annnddd look for the anti-2A people to bring up the lakewood shooting as justificaton for their gun grabbing ways. never mind the guy was probably illega

What's the likelihood the criminal was illegal alien and a gang member? What are a few more weapons laws or drug laws to them?

Good luck and thanks for doing this, all that are going today. Can't get off work/child care duties today, you can say truthfully that there are many more that would be there, but have to keep the world turning so the pols can bloviate about how great they are and all they are doing to reduce gun violence :roll:

Not this week, may make it to CJRPC late night or maybe the w/e

So I managed to stop in there today at Pineland Sports on my way home. Small place, guy's name is Cy. He is a CJRPC member. He does not yet have his guns and ammo there, he is waiting on the state approval, I am sure its a major PITA to get that done. He had fishing stuff, reels, poles, like some hooks and such, a lot of gun cleaning stuff, some crossbows, targets, gun cases, deer hunting paraphenalia and some other misc stuff. Will see how he does, its convenient for me. If yer in the nabe drop by and say hi to Cy!

Nor my fat head or Daniel's high & tight ! That was a lovely M1 in the rack, though, pick of the litter, the rightmost one there.

I was planning on stopping there today/tomorrow on my way home, I did see he was open yesterday, when I passed about 5:15. he'd do well to be the last chance stop for hunters in the are also(Colliers Mills, Dix, the land in Jax off Bowman Rd.) as well as shooter for CJRPC & Dix

OK, mine is done.... for now! Went from a plain jane basic carbine , did volqs hammer, extended mag release---MUCH better than the old one, BTW, I push it and now the mag drops out vs. having to dig it out--auto bolt release & scope. BSA 3-9x 32mm scope with Millet rings. I can see how addicting these little jewels are, I am jonesing for a 2nd one already :mrgreen:

yep, good to see some of you guys, and meet xdjohn. Sorry I had to zip by 9 or so. I did get in 50 rds each on the RIA 1911, the 226 and 10/22. I was also at CJRPC indoor the nite before so this was a good week . I hadn't seen Daniel in awhile either, he let me shoot his p220 .45. Smoother & shorter trigger I thought, than my 226 in 9mm. Also managed to get the 10/22 scope zeroed in for 25 yd, now have to do 50yd and beyond whenever I can get to an outdoor range next. Just got done putting the Volqs hammer in the 10/22, pretty easy,now have the scope, extended mag release,auto bolt release & scope & new hammer. Verry lite pull now, wow, I gotta get used to that, need to keep rule #2 & 3 in mind even more now & not touch the trigger till I want to shoot.

Maybe a little early, but I was planning on stopping down, will bring the newly scoped 10/22 for zeroing & the other two I usually bring. Probably not earlier than 1930.

Ah, cool, Tiny, I guess mauser's stainless model impressed ya? I will be getting a new hammer in the next few weeks, to get that nice easier smoother pull, that with the auto bolt release & bolt buffer & scope, will keep me sated with fiddling for now. I was looking at bolt chamfering, and some of the fancier charging handles with matching mag releases, peep sights, muzzle brakes, sling mounts, along with extractor & firing pin options. And on and on and on. Need to put a few hundred/k rounds thru it with the first phase of mods, lest it become a basket case from excess accessorizing

Is that McGreevey there??

Well, 4 of us total, Tiny, mauser88, cold shot and myself. Tiny & mauser were there before me and glommed a pit, they were all full up apparently, and there were people hovering around outside from time to time. Guess everyone else had the same idea today.Anyways, had fun, tiny's got a LOT of toys He let me shoot the Benelli he brought and mauser let everyone have a go with his .44mag. I got the hang of the 10/22 sights, but am still sucking wind at handguns :oops: Seems I do better indoors so far, maybe just need to be outside more. An enjoyable Labor Day afternoon! thanks to all---Matt