Everything posted by n4p226r
-
Experience Purchasing Hi-Cap Magazine in PA
For $5 go to giftcards.com and buy yourself a prepaid visa with the address of your relatives. Problem solved. I will neither confirm nor deny I used this to buy a noveske pmag back in the day
-
80% Lowers in New Jersey?
What are you trying to accomplish with an 80% lower?
-
80% Lowers in New Jersey?
it's all good. its more funny than anything.
-
80% Lowers in New Jersey?
2C:39-1 j and 2C:39-9 All of it specifically subsection d d.Weapons. Any person who manufactures, causes to be manufactured, transports, ships, sells or disposes of any weapon, including gravity knives, switchblade knives, ballistic knives, daggers, dirks, stilettos, billies, blackjacks, metal knuckles, sandclubs, slingshots, cesti or similar leather bands studded with metal filings, or, except as otherwise provided in subsection i. of this section, in the case of firearms if he is not licensed or registered to do so as provided in chapter 58, is guilty of a crime of the fourth degree. Any person who manufactures, causes to be manufactured, transports, ships, sells or disposes of any weapon or other device which projects, releases or emits tear gas or other substances intended to produce temporary physical discomfort or permanent injury through being vaporized or otherwise dispensed in the air, which is intended to be used for any purpose other than for authorized military or law enforcement purposes by duly authorized military or law enforcement personnel or the device is for the purpose of personal self-defense, is pocket-sized and contains not more than three-quarters of an ounce of chemical substance not ordinarily capable of lethal use or of inflicting serious bodily injury, or other than to be used by any person permitted to possess such weapon or device under the provisions of subsection d. of N.J.S.2C:39-5, which is intended for use by financial and other business institutions as part of an integrated security system, placed at fixed locations, for the protection of money and property, by the duly authorized personnel of those institutions, is guilty of a crime of the fourth degree. be sure to check back in 2 weeks when this question gets asked again
-
D.C. Revisited
i don't know the legalities and case law surrounding stuff like this, but it reeks of horse shit
-
Anyone Run An H2 Buffer
Can you record the noise and upload it to youtube or something?maybe we are all hearing the same thing and it just bothers some of us less
-
Experience Purchasing Hi-Cap Magazine in PA
for $100 a year get a safety deposit box at a nearby bank??
-
Experience Purchasing Hi-Cap Magazine in PA
Why would they know where you are from. Is the grinning ear to ear like a 14 year old looking at porn every time you hold a 30rd pmag that much of a giveaway?
-
Anyone Run An H2 Buffer
just tried a carbine buffer and H buffer and didn't notice and sound difference
-
Experience Purchasing Hi-Cap Magazine in PA
lets put it this way.... at cabelas, the BINS (multiple) of 30 round pmags are sometimes 4'x4'x4' stacked full. you pick them up, and walk to the front of the store, and buy them like you are buying a t-shirt or carton of milk
-
Home Carry (Pistol) Storage
so you purposely give yourself a tactical disadvantage out of fear of an over zealous prosecutor.
-
Home Carry (Pistol) Storage
who are you kidding. that carpet is definitely from pottery barn. affluent areas get carpets from restoration hardware. and that TV is so 1080p. 4k is where it's at. millburn must be a step above irvington,.....at best
-
AR upper, build vs buy, need some help im overwhelmed
essentially 1. is it a forging using the proper metal 2. were all the holes milled to correct size 3. was it finished properly. stick with a known brand that sells quality parts and go from there. BCM are generally considered some of the best mil-spec stripped uppers. for $80 an aero precision one is probably perfect for just about any use.
-
AR upper, build vs buy, need some help im overwhelmed
here's one thing to consider with a dissipator. the barrel in front of the gas block is thinner by a tiny bit than where the gas block is. a lot of dissipators will either have a suboptimal fit for the front gas block or a clamp on gas block. i think the best way to do it would be to have the front of the barrel turned down to fit a .625" A2 front sight post with a small lip behind it to stop it from going further back
-
Tactical clownshoes
my uncle just took his D5 handgun class. he said that travis stressed you need to get another sight picture and reset the trigger.
-
Federal judge grants injunction against DC "good cause" requirement
so there is a backlog. they bring on an extra judge. and then they don't like that judges rulings so they decide to say "oops, judge shouldn't have been here in the first place". does that sound about right?
-
This appears to be Jersey legal...
I think in California you can only get handguns off roster if they are single shot. Then you can convert them back after.
-
Tactical clownshoes
my uncle just took a handgun class with him. i'll have to ask how it was. travis' current videos do seem to be missing that, especially compared to the pat mcnamara videos. that dude just scares me though
-
Tactical clownshoes
I wonder if he does that on video or all the time?
-
Tactical clownshoes
And a real Haley AK reload https://instagram.com/p/_FgsKWNeKz/
-
Tactical clownshoes
Here he is running the 2-2-4-2-2 drill https://instagram.com/p/_F75rpnH80/ Better than I could do
-
PTAC parts?
I'm pretty sure the ptac doesn't use FN barrels. I'm almost certain that only the premium double chrome lined barrels are. Actually, I believe if you see double chrome lined CHF barrels anywhere (PSA, Noveske, Centurion Arms) they are FN barrels. The generic PSA lower parts kit I saw was horrible quality. Front and rear take down pins not working right and general fit and finish problems compared to higher end LPK. I can't imagine a lower cost option being nicer.
-
Trusts and Corps Finally About to Fall for NFA
I guess I'll have to be taken off of a South Carolina trust if my uncle decides to buy more stuff
-
Trusts and Corps Finally About to Fall for NFA
I guess I'll have to be taken off of a South Carolina trust if my uncle decides to buy more stuff
-
Purcase Guns at Dealer Cost
I wasn't stubborn about it. I had my fpid and was able to handle anything I asked for. My brother in law, a police officer, did not have his fpid with him. I informed my brother in law lots of stores have a policy requiring it. He laughed and said "I'm carrying a gun now but I can't hold an unloaded one I'd like to buy". We both chuckled but didn't complain. Guy behind the counter said it isn't his choice, it's state law, the ATF has sent people in before trying to catch them letting non-fpid holders handle firearms. Blah. Blah. I don't have a problem with the policy. I have a problem being blatantly lied to, especially since we didn't care and weren't complaining. It's not like we were pushing it. But like I said, they haven't really lost a customer, since they were consistently higher priced than just about anywhere else I've ever been.