Everything posted by HODGIE
- Ammo
-
smith and wesson model 19
If it's a real beauty then I think $400-$425.00 is more then fair and that is on the high end.
- Ammo
-
My New M1 Garand - Courtesy of the CMP
Rarely, they are built from original receivers and many have new barrels. They are all professionally built and tested before being sold.
-
Shore Shot pistol range
I think it was Bill then, unless they have a Phil there now but they did not 2 weeks ago..... I been going there for about 5 years now, they are great to deal with.
-
Shore Shot pistol range
Phil? As far as I know there is no Phil at Shore Shot, you sure you did not go over to BA? Shore Shot would be Billy, Kyle, Kenny, Tiny, Bob, and a few other guy's.
- Walther P1 Build *New Pics*
-
My New M1 Garand - Courtesy of the CMP
Good info. This is the 3rd post I have see in the last few days of guy's getting rifles back in less then 90 day's so things are looking up for perspective buyers.
-
My New M1 Garand - Courtesy of the CMP
I would use Denatured Alcohol is anything to see of anything will come out, the break cleaner may ruin the wood. MN's are coated in Amber shellac by the Russians which will protect it from the brake cleaner. If anything I would keep it as is and you can get brand new replacement stocks for pretty cheap.
-
My New M1 Garand - Courtesy of the CMP
Very nice, what grade is it, receiver type and barrel? I have to find someone to fill out my paper work, I might just take it to Shore Shot and see if they will do it for me.
-
AK in NJ
building a Saiga is simple... god im really starting to think i should be building and selling these things.. I believe K-VAR already does.
-
smith and wesson model 19
$600.00 is on the over priced end for a model 19, the reason why he was offered $250.00 is because it may only be worth around $300.00-$400.00 depending on the series run on(1-5). Even in pristine condition they usually go for about $500-$550.00 for the more describable models on GB and as stated above the ones in the higher price end do not move.
-
Sten MKIII
Nice bobber, My brother in law is going to start a build soon out of an old Triumph.
-
Mounting Scope DPMS in 308
To get the break off easily and to be able to resue it, Use a center punch on the pin so the bit doesn't "walk" on you. Drill a smaller hole than the pin all the way through. If you mess up, at least the mess up is little and you can still recover. Use progressively larger bits and keep drilling out the hole until the pin is gone. Use lots of oil also to keep the bit(s) from burning up. Tap the brake off. If you future plan is to change the hand guards then I would buy the mount you want and just remove the rear site for now instead of wasting cash on a mount that is way to high and looks funny.
-
AK in NJ
Nice site, never heard of them before, would have saved me a lot of work in the past but the experience is always good to. Some of those 74s look really nice!
-
Mounting Scope DPMS in 308
Actually after looking at it some more, you can drill this out pretty easily.
-
Mounting Scope DPMS in 308
Since it only appears to be a small pin in the one spot you should be able to grind it down and then pull it out.
-
Mounting Scope DPMS in 308
well there are no delta rings at all.. this is a factory installed piece.. i think that all dpms free float hand guards are like this.. getting that brake off is going to be difficult i think.. I know I edited my post, I was actually looking at the pic I posted with the scope mount because I am a douche. It will be a pain in the ass, is it pinned, welded or both?
-
Mounting Scope DPMS in 308
Ahh I see, what you are saying now, I did not look it over carefully enough. I think your only option is to either get a very high mount or get a flip up rear sight.
-
Mounting Scope DPMS in 308
Not sure what you mean, I think we got our info crossed. You can just pull back on the delta ring and remove the hand guards you have on now and replace with a 2 piece quad rail which will be the same height as the rail on the upper receiver. viewtopic.php?f=46&t=4519 The height of the quad rail is the same as the upper receiver rail perfect in a level.
-
AK in NJ
Check out the Bullet hole in Belville, I live down south so do not deal with anyone up that way but I here they are good. Ohh and that's not an AK it's a Wasr-10
-
Mounting Scope DPMS in 308
you can probably get a higher mount but it would be pushing it. If you replaced the the forearm with a drop in quad rail then you can get a mount on without having to remove that rear site.
-
AK in NJ
For a correct conversion you need to move the trigger housing 2" back, and to use standard AK mags you will also need to do a feed ramp and bullet guide modification on it. The trigger needs to be changed out also as the stock one sucks but that is super easy to change the unit.
-
Mounting Scope DPMS in 308
Yes there are many rails and mounts that will raise or off set the optic. This is not mine but an example of what you can do, there are several others out there. I think your going to have to rid yourself of that fixed rear and get a flip down, it looks very cumbersome.
-
AK in NJ
Yes but you have the Romanian hi-cap rifle not the MV version as that will not be legal here. It's listed right below the Romanian Underfolder in black dress. What town or area do you live in? FYI Allot of sites that were NJ friendly with shipping hi-dap rifles without mag's to NJ, MD and NY have all stopped doing it for some reason since January 1st, Not sure if classic is one of them but my friend was denied by Centerfire systems a place where he has ordered at least a half of dozen Firearms from. In a worst case scenario, you can always get the single stack and when you feel more comfortable with it open the mag well up on your own with a dremmel. All Wasr's start off as single stack then the importer opens them up. With the low cap you will also be less prone to get any of Century's bad mistakes.