Everything posted by HODGIE
-
How Many Long Guns
No limit on long gun's my record is 3 at one time.
-
Dick's in Brick/Lakewood
It's right next to the new Costco, that plaza is going to be a complete mess but at least I can get last minute ammo cheaper then at the ranges.
-
Info on FFL
I know the ffl's can answer better but I have been looking into it. The fed's seem like they are fairly easy to please, your real trouble is going to come from the state and your local township for zoning approval. If you are within a School zone you can automatically forget it.
-
Are you planning on leaving New Jersey?
Shopping for real estate now, will be going up again the the Poconos area on the 30th to check some more locations out.
-
BA 1/13/2010
I was there but never made it in due top being sick, picked up a package from TJ since it was down my way. Maybe I will make it down sometime in the next week or 2 with the new lever gun.
-
Crossbreed Holsters
I have 2 one for a Khar and another on the way for a 1911 compact. Both are the horsehide they do NOT need anything for break in as far as I am concerned. They are very comfortable more so then any other IWB ccw rig I have ever put on. If you decide to use oil on it I would shoot them a e-mail asking if it's okay. I am sure it would void the warranty if ruined.
-
Ammo Deals, .22 if you need it
It's also a inconsistent powder load or charge between cartridges, some just lack enough energy to cycle the bolt on a semi auto. I never use hollow points in .22lr it just ad's to the cycling head ache's. Mini mag's and federal 40GR HV always works well in all my rifles.
-
Ammo Deals, .22 if you need it
Dicks in Freehold has it, may want to pick up a package and give it a ago before ordering. I used it in several .22's it shoots well in my bolt actions and in the Marlin 60. Short cycles in my TC classic, GSG-5 and Kimber conversion. I actually like the Remington value pack or thunder bolt better HV then this.
-
Coming soon? NJ Legal Steyr Augs?
Melted down wiffle ball bat......
-
Main Street Gun Shop
Best way to do that is to leave the state and try it from a more gun friendly location, at least that is what I am going to try this up coming year.
-
Main Street Gun Shop
Ahhh Okay I remember this, I think CSJ told me that story awhile back, I wonder if the state is going to let it happen, they are way worse then the Fed's.
-
GUN BAN COMMING?
Any link to the original article? Some how I think if this was the plan they would not be advertising it but what do I know?
-
Always wanted an AR-15
15 minute trigger job with your stock parts that really works, if you mess up it will cost all of .50 to fix. http://www.sargenthome.com/15_Minute_AR_Trigger_Job.htm As far as the list of Tier 1 uppers I have to disagree but that's just my opinion, just like buying a TV I guess. Yes they are all excellent uppers and companies but most of the companies listed are all milspec, then you also have to think is spending $400.00 more on a DD over a Armlite really going to make that much of a noticeable difference at the range and the answer is absolutely not for the average shooter. If your building a AR for competition or bench shooting only there are smarter choices you will have to make but outside of that I cannot think of to many other cases but that is just me.
-
Main Street Gun Shop
Where did it go in the 1st place?
-
Always wanted an AR-15
If you were to buy a completed rifle you would have to learn the platform for cleaning and trouble shooting anyway. Might as well do it while putting it together yourself. The upper can be a bit of a challenge so buying a completed one is a good idea however building a lower is pretty easy, teaches you a lot and you can do the trigger job on it before getting it together from the start. If you buy and completed upper and then build your lower you will need . receiver . lower parts kit . buffer/tube/spring/nut and sling plate . Stock Put it all together and then slap in on the upper, done in about an hour or so.
-
Always wanted an AR-15
These are the sites I used. My total build was about 1k but I purchased a few things I did use in the end, so It would have been about $925.00 give or take a few. There are guy's building for $650-$750.00 right now with new parts so it can be done with some research. I would also take into account that most rifles in the $950-$1100.00 range in the shops are stock then you end up dumping another $300.00 + in quad rails, new grips, sights and what ever else you need hanging off the rifle. http://www.jsesurplus.com/stocks.aspx http://www.milsurpstuff.com/categories.asp?cat=AR-15 http://www.aimsurplus.com/acatalog/AR15 ... Parts.html http://dsgarms.com/index.cfm/category/1/ar15.cfm http://www.spikestactical.com/z/
-
Always wanted an AR-15
Check out AR-15.COM and check out AGI builders and armors DVD's. There are so many parts sites out there it's ridiculous, I will put together a list of where I bought my products from and post it tomorrow.
-
Always wanted an AR-15
CSJ is right neither of those in the picture are NJ legal, among the things mentioned you will also have to remove the bayonet lug. My advise is hit some of the local shops who have them in stock and see what you like any AR can be modded with all the crap out there If your plan is to dump $$ into an already high priced rifle. If your in the Jersey shore are hit up Shore Shot they have about 20+ AR's in stock right now from several manufactures. Personally I would rather build one get what you want the 1st time and not have to change anything out and pay for parts you do not want or need. Since parts are pretty much back to where they were or lower then before the election because of increased production and a bad economy you can build a real shooter for less them most entry level rifles from the big names. Building one, even just the lower gives you a much better understanding and appreciation for the over all platform. Spikes lower, Armlite upper, just needs an optic and it's done. Just my .02
-
AR Gun Smith near Morristown, NJ
If you do it yourself you can pin or JB weld it cleanly it will never come off easily trust me.
-
AR Gun Smith near Morristown, NJ
Invest in the AR armorers and builders course from AGI and save yourself the hassle of having to find a smith and pay for something that you can easily do yourself. That's the beauty of these rifles is that everything is easily doable on them for the average guy with a little know how and some simple tools. AR-15.com has more builders info then anywhere else on the AR platform.
-
Who has the most firearms in stock?
Shore shot has more pistols in stock then any other NJ shop that I have even been in before, at least 20 to 30 of every major caliber if not more. Rifles they about about 30, mostly AR-15's some saiga's and a few carbines.
-
Charter Arms anyone?
Yeah It's time to ditch this one when you get it back even if it's a full replacement and get something new. I cannot for the life of me understand why they would produce a line that is completely substandard to everything else. In the long run it would be cheaper then having to repair each one several times after it's purchased. Get a Taurus or a Smith if you can pony up the cash and never look back.
-
Split cases from Mosin m44 - Pics added
Psl's are rated for light ball only, which could have easily been the issue with the heavy ball, the action is giving and taking a beaten with the HB.
-
Split cases from Mosin m44 - Pics added
Yes please let me know, I would easily buy a few at $75.00-$100.00 each. Even Sarco couldn't come close to that a few weeks ago, the cheapest one they had was $150.00 and the bore l= looked a mess, lot's of pitting and rust.
-
Split cases from Mosin m44 - Pics added
You find some M-44's for $75.00 then let me know I will buy the whole lot. I have not seen them at $75.00 in the last 3 years, they are drying up just like the m38's did and at the last 4 shows have been from $125.00 to $225.00 depending on condition. The cheapest 91/30's out there these day's are $79.00 and there are way more of them then any other variant.