Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

njJoniGuy

Members
  • Joined

  • Last visited

Everything posted by njJoniGuy

  1. As the owner of .223 pistols, the thought of a .308 pistol is woody material!!!!!!
  2. Chrome-lined, CLEAN chambers tend to do a lot better not hanging up with steel-cased ammo than dirty or non-chrome ones. Keeping the ammo out of the heat of the sun before loading it also helps a lot.
  3. Certainly would NOT be on a long arm. But it raises an interesting question when it comes to AR pistols. The magwell, by itself, is NOT a forward grip, but when you install a "grip enhancer" like this on the magwell, that might just change a prosecutor's/jury's opinion
  4. 1911 all day long Because anything less than .45 is just that ... LESS
  5. According to a member of the staff in the office of Asm Michael Patrick Carroll, the Republican Parliamentarian, this morning, halting a vote in committee that isn't going the way the Chairman would like is not a violation of the Assembly rules. She said it's done all the time, in order for the Chairman to wrangle votes more to his liking from the members. This delay hopefully will throw a major monkey wrench into the works. All of these legislators would like to get the hell out of dodge and start campaigning to retain their positions of power in the November General election. And at present, there is no future meeting of the Assembly L&PS committee scheduled. But I guess that can change on a moment's notice. The "undetermined cost" of this proposed legislation should, by itself, be reason enough to send this bill directly to hell given the poor state of health of the NJ treasury.
  6. 1. Pin stock 2. Permanently alter (or discard) 30 round mag 3. Replace flash hider with compensator or brake or thread protector and permanently attach same 4. Remove bayonet lug There goes the "bargain" price :-(
  7. According to a member of the staff in the office of Asm Michael Patrick Carroll, the Republican Parliamentarian, this morning, halting a vote in committee that isn't going the way the Chairman would like is not a violation of the Assembly rules. She said it's done all the time, in order for the Chairman to wrangle votes more to his liking from the members. This delay hopefully will throw a major monkey wrench into the works. All of these legislators would like to get the hell out of dodge and start campaigning to retain their positions of power in the November General election. And at present, there is no future meeting of the Assembly L&PS committee scheduled. But I guess that can change on a moment's notice. The "undetermined cost" of this proposed legislation should, by itself, be reason enough to send this bill directly to hell given the poor state of health of the NJ treasury.
  8. MidwayUSA carries a 3rd party replacement to relieve the floppy trigger issue. http://www.midwayusa.com/product/259762/wild-west-guns-rifle-trigger-marlin-336-444-1894-1895-blue
  9. In addition to permanently attaching the muzzle brake (to negate the presence of a threaded barrel), ALL the barrel shrouding material (handguards, free float, etc) need to be removed. The 50oz weight limit (as manufactured, no magazine) is already not an issue with the EXP There is no restriction on OAL, just weight. The only 'Evil Feature' you should be left with is accepting a magazine outside the pistol grip.
  10. Maks and Vlad, Here in NJ, you need to use a PPP to acquire a lower that you will use to assemble a handgun. You can assemble it as a jersey-legal long gun or a jersey-legal handgun. You can even reassemble the long gun back into a handgun if you choose, because the lower is registered (top copy of PPP) as a handgun. You can't legally do the opposite. A lower that is NOT acquired as a handgun cannot be legally assembled into a handgun. You can only legally assemble it as a long gun. Handguns DO NOT have shoulder stocks. Short-barrelled rifles (SBR) do, but they're not legally available to us in the PRNJ. Carbon or Poly are the only way to make weight (50 oz max as manufactured) short of dangerously swiss-cheesing a metal setup. The lightweight upper/barrel/BCG is the Bushmaster way-to-go in jersey-legal AR pistols. With most parts in short supply these days, and Bushmaster's Carbon-15 offerings cut back in recent years, finding the makings of an upper that will allow you to make weight in jersey is a tough one. There was one here on the forum a couple of months ago, but it's now parked in a friend's safe until he has time to build it up. If you really really want a jersey-legal AR pistol, buy a New Frontier lower with a PPP and find someone elsewhere in Amerika with a Bushmaster Carbon15 AR pistol who will sell you the complete upper plus the buffer tube with the full-length center pin, skinny spring, non-standard (short) buffer and bolt carrier. He keeps the rest of the lower, and no firearms have changed hands. That upper needs to be stripped of its handguards and any other barrel shroud, plus its threaded muzzle (if any) before assembling it onto the pistol lower.
  11. njSigFan Just noticed your sigline list and an XDM45-5.25 is the tightest chamber around I very successfully use a Lee Bulge Buster (uses the guts of a Lee factory crimp die) Both items: low cost HIGH VALUE
  12. The Lee dies you bought are carbide, so in .45acp (a straight wall, low pressure cartridge) no lube is necessary. It's ok to deprime with the sizing die as long as the brass has been tumbled shiny to remove crud that would get onto the die and then scratch every subsequent piece of brass Use the seating die to just set the bullet depth. Acquire the fourth die (the missing one!) "Lee Factory Crimp" and set it to crimp the loaded round to your specs. Acquire and use a full length cartridge guage for every caliber you reload. You should test (by guaging) every piece of ammo you make prior to packaging it for future use. You must be the Quality Control Manager of your reloading venture. Your life (and limbs) and those of others who would use your ammo depends on it.
  13. and some are not.
  14. I don't remember all the details but in '12 Arby's corporate pulled an alinsky-type move on Rush. I went in my 2 (formerly) regular arby's and told the mgrs that it was corporate that did it and to tell them so. All we can do is stand with our principles. Haven't eaten arby's since. (and I miss it some)
  15. I went into my local (W Deptford) Staples today and asked for the manager. I introduced myself to him and handed him my Dividends keyring tag and asked him to pass along to HIS managers that a formerly happy Staples customer will no longer spend another dime with them because of an awful decision by corporate to exclude a local gun store from a promotional drawing in Nebraska. Same thing with no eating anymore at Arby's. I'd rather eat ramen and listen to Rush.
  16. How many tags do you get with your $300 FPID endorsement? :pioneersmoke:
  17. check your IM
  18. There are high power matches at Cumberland on Sat 6/1 0900 and Sun 6/2 0800 so the gate will be open. Come all the way back to the 600 range and find me in dayglo orange t
  19. As a rule of thumb (if you want to keep all your digits) if there is only ONE powder weight listed, regard it as MAX CHARGE. Starting charge is generally 10% less than the Max Charge. BEWARE and BE CAREFUL
  20. "Preban" is just a dirty six letter word here in the PRNJ, Home of the Original Assault Weapon Ban. You'd have to go back to Cain and Abel to get preban for jersey.
  21. Even though our nation is growing more communist by the day, capitalism still rules the marketplace. The inside price is for a "no questions asked" transaction. The sidewalk transaction requires a certain amount of seller info to be disclosed, leaving a paper trail. Thinking about going myself, I'd have a wish list in mind (to make the first cut) and an idea of price range I'd be willing to offer for what may come along. (Ever watch "American Pickers??") And unless you have an FFL, don't even think about buying anything we can't own because YOU KNOW we're going to be looked at with a careful eye by either the local PD or the NJSP on site.
  22. http://www.nj.gov/guns/faq.html $50 is the min & $250 is the max they pay inside the buyback Always a case of buyer beware, make sure what you purchase is legal to own here in the gulag or you might get jammed up good.
  23. An unlimited quantity of LONG GUNS can be purchased by FID-holding NJ residents by completing a pair of Certificates of Eligibility (attached) on the spot. One copy each for NJ seller and NJ purchaser. HANDGUNS unfortunately are limited to ONE and NJ seller and NJ purchaser must complete the purchaser's 4-part Pistol Purchase Permit. Seller is responsible for proper distribution of the 4 parts (Original to NJSP, 2nd copy to purchaser's issuing PD, 3rd to seller, 4th to purchaser.) Non-residents of the Glorious Peoples Republik of New Jerseystan are NOT LEGALLY ELIGIBLE to participate in this sidewalk sale (except for FFLs) You may get hassled by the local authorities, but the scenarios I explained are COMPLETELY LEGAL under present law.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.