Everything posted by Pizza Bob
-
PA Non-Resident CCW for NJ Residents?
This was true at one time. Probably about 8 - 10 years ago sheriff Denny Nau of Centre County, PA would issue a PA non-resident CCW if you presented him with your FPID card. He was corrected by the PA judiciary and hasn't done this in years. Most likely the man that told you that had a license issued during that period and has managed to just renew it ever since. Adios, Pizza Bob
-
1st Cleaning in 20+ Years
What you have there is a bullseye gun (NRA 2700) from the 60's - 70's. Once Hi-Standard introduced the models with the same grip angle as a 1911, these kind of fell out of favor. Here's my Model 102 - which was my father's bullseye gun in the 60's... These came in 6", 8" and 10" barrels. It appears that both you and I have the 8" version. By all means, clean it yourself. The barrel comes off easily by pushing the button at the front of the frame (under the barrel) to the rear. Since it has been a long time, it may be stiff - use a countertop with the barrel hanging over the edge and the button on the counter and put your weight on it. There is a mushroom shaped post on the underside of the barrel - the button is the release for that. Just be careful when you remove the grips and note (maybe diagram) the position of the springs. Remove the muzzle brake - there are two allen screws (3 & 9 o'clock) facing rearward, that screw into detents in the end of the barrel. Clean the lead out of the brake - be careful using chemicals on the blued finish. Remove the slide and thoroughly scrub everywhere you can reach. Gun Scrubber is your friend. Lube it and re-assemble and it will be fine. Enjoy. Adios, Pizza Bob
-
Any good reason to pick a 38sp over a 357mag?
I tend to like to shoot specific calibers out of guns chambered for that caliber. I have a couple .44 Mags, but have never shot .44 Spl out of them - I have revolvers chambered in .44 Spl for that. Likewise, I have some .357 Mags, but have never shot .38 Spl's in them - I have .38 Spl guns for that. Probably more a result of me being lazy and not liking to have to really clean the chambers after shooting the shorter rounds. I should be picking-up a 586 chambered specifically in .38 Special this week (Monday will be 2 weeks in NICS). I intend to use that for IDPA SSR Division. I am at an age now that I am of the mind that what do you really need the magnum rounds for? When I hunted and/or shot metallic silhouette with a handgun, that was different - but punching paper or in practical competition, there is no need. Just my $.02 worth. Adios, Pizza Bob
-
Any opinions on an Escort tactical?
When I first saw the thread title, this is what came immediately to mind... Then I thought - how can a radar detector be "tactical" and switched mental gears to the gun category and came up with this... I guess it could be "tactical", but the shotgun makes more sense. Adios, Pizza Bob
-
Anyone familiar with a S&W model 31 revolver?
Probably not what you want. .32 S&W Long is not easy to find and spendy when you do. This is a fixed sight I or J frame (dependent on age). I don't know of any rifle chambered in that caliber. Keep looking. Adios, Pizza Bob
-
Ever wonder what happens when 100 primers go boom in your press?
Alec: Glad you're OK. I'm sure that Dillon will make good - not so sure about Hanes. Adios, Pizza Bob
-
permit extension
Check with your local PD - specifically the person you dealt with in obtaining the permit in the first place. Extensions are solely discretionary - so your local PD may not extend your permit. Also, find out when they want it - some prefer that you bring it in before it expires, others prefer after. In either case the extension is and additional 90 days - for a total of 180 days from date of issue. Some PD's will extend while you wait, others may take several days. Good luck. Adios, PIzza Bob
-
Dad Opened Up the Safe
OP - sent you an important PM Adios, Pizza Bob
-
Transport Law
You have received no replies because this has been discussed ad nauseum. However, what you quote above (in, what I assume to be unintentional subscript) is not from the statutes, but rather from what the NJSP think the law ought to be. There is no requirement to lock anything, other than the trunk. Carrying loaded mags is fine, as long as one is not inserted in the gun. carrying magazines and/or ammunition in your range bag is fine. Adios, Pizza Bob
-
Garden Tools Demo Gets Teacher suspended on Weapons Charge
Zero Tolerance = Zero Intelligence
-
Bloomberg: After Boston bombing, we need to rethink our Constitution
Already being lambasted discussed here... http://njgunforums.com/forum/index.php/topic/54206-bloomberg-says-interpretation-of-constitution-will-%e2%80%98have-to-change%e2%80%99-after-boston-bombing/page__fromsearch__1
-
Question about STS33
Not processed = Not refused
-
wolf primer and .45 cap
No first hand experience, but I have heard the primer cup is very hard. Should be fine in any stock gun, but if your gun is tuned, with a light trigger, you may experience ignition problems.
-
Rifle suggestion, anyone?
And a .308 or .223/5.56 really doesn't address the problem of ammo availability - both calibers in high demand and short supply.
-
handgun purchase permit
That is the SBI-212A - the non-criminal background check. That is done by the NJSP - SBI out of West Trenton. However, my PD told me up front that the SBI was slow in returning the 212A - but that meant the difference between the normal 4 week turnaround and the 5 weeks that it took this time. Depends when your PD sent it in - I think they're shining you on, and the NJSP are handy scapegoats. Adios, Pizza Bob
-
handgun purchase permit
If local PD's are being processed in 5-6 weeks, how can the back-up be with the NJSP in Trenton? I would say the problem lies with your local barracks. Either not allocating enough manpower or giving the processing of applications a very low priority. It took me 5 weeks to get my latest series of P2P's through my local PD. The process is the same whether done by a municipality or the local NJSP barracks. JMHO Adios, PIzza Bob
-
Revolver Roll Call
AFAIK, they are still a two-piece design, except for revolvers that use a post type frame, like Dan Wesson.
-
Rifle suggestion, anyone?
That one is somewhere on my wish list.
-
Rifle suggestion, anyone?
How about availability of cartridges? In times like these, a nice hunting caliber would have easier ammo availability. Something like a .243 Winchester? Wide selection of firearms available in that caliber. Savage is a good one to look at - accu-trigger and good factory accuracy. Just a thought. Adios, Pizza Bob
-
32-20 single action
And then you need a lever gun to complement the handgun.
-
Congrats to my son for passing NJ Hunter Education!!
Congratulations to your son!!
-
Handgun caliber lever action for wife?
Refers to the appx diameter of the loaded brass case. The .38 Spl goes back about 100 years and was preceded by other rounds of appx .38" diameter. Converted .36 caliber cap & ball revolvers shot a .38 cartridge with a heeled bullet of appx .38" and the diameter (not the heeled bullet) carried over into the design of the .38 Spl.
-
IDPA Classifier / Phillipsburg, NJ 4/20
I have one seat available if someone wants to shoot an IDPA Classifier Match. You must be an IDPA member. This will be part of a regular match (two added stages) so there will be no malfunction make-ups. Leaving my house at 11:00 AM (Washington Crossing area - between Trenton & Lambertville), hammer down 1:00 PM. PM me before 8 PM tonight (4/19) if you are interested. Adios, Pizza Bob
-
Handgun caliber lever action for wife?
Both are .357" in diameter
-
NICS going online? 15min good to go.
We have known this has been coming for some time - hence what you heard. The question of the day is when? I suspect we are months, if not a year or more away from this happening - so don't start the celebration yet. Adios, PIzza Bob