Everything posted by Pizza Bob
-
IDPA @ Somerset Sunday 4/15
I'm in
-
Took the GF to Lou's today
While I have no first hand experience with this pistol, I've done some research and it appears she made a good choice - assuming the quality of the gun is on par with recent Walther offerings (read that: PPQ). I think a lot of people jumped to conclusions when the .380 caliber was mentioned. I, too, thought that she'll be in for a surprise when she finds the recoil to be more than the 9x19 that she is familiar with. Lunker alluded to this also. That is because the majority of the .380 offerings are blowback design - meaning you not only have the recoil impulse generated from the cartridge, but there is nothing to delay that impulse transferring to the slide so you are dealing with the mass of the slide traveling faster than what we see with other types of actions. This Walther, however, has a locked breech, so I would expect recoil to be less than a 9x19. The locked breech design also means that a lighter recoil spring is used, making it easier to manipulate the slide. A complaint often heard from women about semi-automatic pistols. It is also a medium sized pistol, on the scale of the Walther P22 with ergonomics that resemble other Walther offerings, thus should be good for smaller hands. The cost of ammo aside, with which you seem to have already come to terms, I'd say she made an excellent choice. Of course, you know that I would have rather seen her get a revolver, but that's just me . Adios, Pizza Bob
-
S&W 629-2 Price Check?
Congrats. You did real well.
-
So how old are most people here anyway?
Old enough to know better.
-
S&W 629-2 Price Check?
My opinion only - $700 - $725 is a fair price for a shooter in very good to excellent condition. Look around and $650 to $675 would be a possibility. Good luck. Adios, Pizza Bob
-
Middlesex Gun Surrender Program. Pic incl
What if somebody lodged a complaint with the Middlesex County Executive's Office? Just wonderin'
-
Would anyone be able to guide me in the right direction for AR15 tactical competitions?
Shongum has rifle side stages as an adjunct to their USPSA matches. You may want to check out Langhorne Rod & Gun and Topton - as they may have rifle specific matches.
-
SO whats Smith-Wesson up to?
We had a thread about this already (how quickly we forget). I'll stick with my original guess of a less-than-lethal CN type spray. Maybe in a unique dispenser to compete with Kimber's Pepperblaster II. We'll know in a week. Adios, Pizza Bob
-
speedloaders which ones are good? moonclips?
As Chris noted, the benefits of converting a rimmed cartridge revolver to use moonclips is purely one of speed. A speedloader requires you to align the cartridges with the cylinder, activate some kind of release (this can be automatic or manual) and then discard the loader. A moonclip just stays with the cartridges. One operation - insert, done. If you have the cylinder of a .357 machined to accept moonclips, the machinist will leave a ridge around the outside circumference of the cylinder. When using moonclips, the diameter of the moonclip fits inside the ID of the ridge and the cartridge rims rest on both the moonclip and the outer ridge. When not using moonclips, the cartridge rim rests only on the ridge, but that is enough support to effectively headspace the cartridge and prevent it from being driven forward when the hammer strikes it. The gun can be used with or without moonclips. The OAL of the cylinder remains the same. All that being said - moonclips are very firearm specific and I don't know if any are available for your Ruger or Taurus. Moonclips were originally made so that rimless cartridges could be used in revolvers, but they so dominate any revolver speed shooting competition, that shooters adapted the concept for rimmed catrridges also. Speedloaders on the other hand, fit somewhat sloppily. On most there is a degree of cartridge wiggle so you can align them quickly with the charge holes, so some speedloaders may fit various manufacturer's guns. I believe the HKS L-frame loader will also work with Pythons (and maybe your Ruger). You get the idea. If you want to compete, then I'd recommend Safariland Comp speedloaders - preferably Comp II's or III's, if made for your revolvers. They release the shells automatically when the center of the loader is pressed against the extractor star. If that much speed isn't needed, and you want a handy way to load quickly, HKS loaders are plentiful and cover a wide variety of makes & models. Downside is that it takes a separate operation (a twisting of a knob) to release the cartridges. The upside of that system is that accidental release is less likely. HTH Adios, Pizza Bob ETA: On this site is a video showing how a cylinder for a rimmed-cartridge revolver is machined for moonclips. The short version is all you need... http://www.moonclips.com/content/machine.asp
-
NRA Show St. Louis
Not really. I hang out with a classy bunch of people All I know is, before I ever went to St Louis, everyone told me to stay the heck out of East St Louis - I pass that along for what it's worth. I'll see if I can find you a good Irish Pub downtown. Adios, Pizza Bob
-
NRA Show St. Louis
Kevin: If you are mobile and want the best prime rib of your life, I highly recommend here... http://www.kreisrestaurant.com/ I used to be in St Louis 4 or 5 times a year and always made it a point to have at least one prime rib dinner here. They are consistently fantastic. Have fun. Adios, Pizza Bob
-
painting front site on ruger ?
I've used model paint. Whether you use nail polish or paint, if you are going to use a flourescent color, it is best to lay down a white undercoat first. If your front sight is easily interchanged, then, indeed, get a FO replacement.
-
Conflicting Assault Weapon Definitions for Semiautomatic Shotgun
There is an important distinction that you are overlooking - TheDon is correct, there are conflicting definitions in the Administrative Code. The NJAC is not law. The relevant statute is 2C:39-1,w(3)... A semi-automatic shotgun with either a magazine capacity exceeding six rounds, a pistol grip, or a folding stock. The "two evil features" in the NJAC, as it applies to semi-auto shotguns, is simply a mistake and is irrelevant as it is not law. There are no such conflicting satetments in the statutes. Adios, Pizza Bob
-
Glock 19 15rd Magazine markings...
You answered your own question. The mags are from the time of the AWB, when the the only people allowed to have >10-rd mags were LE and the Gov't and those mags were so marked. When the AWB sunsetted those mags became legal for any state that allowed that number of rounds (free states and NJ). A lot of states kept the AWB in place via state law and are limited to 10-rd mags. Adios, Pizza Bob
-
Dum Dum bullets--yes, I know, another HP question
There is no prohibition about having hollowpoint ammo in your home. It is perfectly legal to use it in a HD situation. The point of this thread was that, given the judge's ruling in the Aiken case, the types of ammunition that require exceptions has expanded from just hollowpoints to anything "...meant to expand...".
-
New to me for HD
My mistake - either the contrast in your picture makes the front sight appear silver or the finish on the sight is worn. The -4 is not barrel length, it is the engineering change. S&W revolvers go through an evolutionary process with each engineering change designated by a progressively higher dash number. Your gun would not be subject to the FP bushing recall. The -4 change occurred in 1993 and involved a rear sight leaf and extractor change, the introduction of Hogue grips and drilling and tapping the frame - not sure what the last one entailed, but it may be on this change that they drilled the top strap to make it easier to mount optical sights (but I thought that occurred later than 1993). Open the cylinder and look at the underside of the top strap and see if there is a hole there that would be covered by the rear sight when viewing from the top. HTH Adios, Pizza Bob
-
New to me for HD
autox: On the stainless guns the no-dash 686 had a stainless front sight. S&W realized that it was hard to see so switch to a black front sight. I believe that the change occurred concurrent with the -1 (dash one) guns, but it isn't listed as an engineering change. The firing pin bushing recall was on both the 585/686 and 586-1/686-1 guns. The hole in the bushing (in the recoil shield) was too large and on very hot loads the primer could flow back into the hole and tie-up the cylinder. Guns that had the bushing changed should be designated: 586M or 586-1M / 686M or 686-1M. Up to you whether to have it done at this point. If the gun was mint ANIB condition with all papers, tools and box, then an unmodified version may be of some additional value to collectors. If it is a shooter, then impact on collectible value would be nil. In the overall scheme of things S&W, L-frames were the new kid on the block until the X-frames, so they would really have to be unique - as in a low production variation - or pristine to be of any interest to collectors. I also have a feeling - and that is all this is, I have no empirical evidence - that today's .357 factory loads are not as hot as they were in the 1980/1981 time frame, so primer flow is probably much less likely to happen. If you are a handloader, and like the monster loads, then it would probably be a good idea to have the recall done. I imagine that S&W would send a call tag. Just beware, when I had a gun come back from a recall check, they shipped with no prior notification and no signature required - found it on my porch when I came home from work. Enjoy your revolvers guys. Adios, Pizza Bob
-
New to me for HD
Excellent choice. Great deal. Enjoy! ETA: This appears to be a 686 (no dash). Check and see if it has the "M" stamp indicating it has been back to the factory for the firing pin bushing recall.
-
Aguila 9mm ~$200/case
Aguila is Remington's Mexican subsidiary
- Dum Dum bullets--yes, I know, another HP question
-
Ordering a legally pinned magazine..
Try PM'ing Paul (PK90) and see if he does Mini-14 mags. Bit of a hike for you to pick them up, but seeing his shop makes it worth the trip. Adios, Pizza Bob
-
1919a4 semi auto .308 rifle legal or not?
Yes, but to what end? You would have to clear the action and move the belt up one link to a live round - more work than if you just had a pile of 15-link belts ready to go.
- Colt California Compliant Rifles
-
Recent Appellate Division decision on carrying and possession
This, and various elements of this case are being discussed in about three different threads.
-
Dum Dum bullets--yes, I know, another HP question
If you went to a match or the range and inadvertently left some HP ammo in your car - you could be prosecuted for transporting outside the exceptions. We all thought that by using soft points, cast, EFMJ's, PowrBalls etc, etc that if a few spilled out in your car, we were safe because they are not considered HP's or DumDums, thus the travel exceptions don't apply. Now we have a judge rule that any bullet that is meant to expand falls under the statute and can only be transported under the exceptions. Adios, Pizza Bob