Everything posted by Pizza Bob
-
Lever Gun Optics?
I'd say that is definitely the better choice for an AR, but it's hard to beat a low-power Weaver V-series for straight-walled case lever gun. Adios, Pizza Bob
-
Beretta M9/92 Mag Release
If that's the case, he should be GTG - there is a 92G Elite and a 92G Elite II on the approved production gun list for USPSA and I believe, just the fact that it was included on a factory gun clears the way for IDPA. They use Glock as an example and the same logic should apply here. Adios, PIzza Bob
-
Lever Gun Optics?
Great minds think alike - if I hadn't been so verbose in my recommendation, I would have beaten you to the punch. Adios, Pizza Bob
-
Lever Gun Optics?
Pardon my saying so, but that's crap. A decent low-cost optic, especially for a handgun caliber, would be something like this... http://www.opticsplanet.net/weaver-rifle-scopes-v3-hunting-849400.html Should do you fine out to 100 yards, which is pretty much the limitation the cartridge imposes for consistent accuracy. Again, JMHO Adios, PIzza Bob
- Beretta M9/92 Mag Release
-
Fake eotech
It doesn't matter what you call them - except illegal. They are intended to deceive, and while Rayco may disclose the fact they aren't the real thing, what happens in the secondary market? Also, as Shane pointed out, these hurt the brand integrity of the real thing. While you may purchase an item, the manufacturer maintains control over their trademark. When I was in the automotive industry, we actually forced a dealer to deidentify our product (remove all brand names, logos and trademarks) because of what they had done to it - we did not want it represented as ours. As far as I'm concerned Rayco is in collusion with the counterfeiters and they should all (manufacturer, importer, wholesaler and retailer) be held accountable under the law. JMHO Adios, Pizza Bob
-
BUG/Pocket Gun meet
Now THAT I'd participate in.
-
BUG/Pocket Gun meet
Not to be a party-pooper, but the thought of a lot of people, unknown to me and of unknown ability, handling a plethora of unfamiliar handguns, just seems a recipe for potential disaster. As Smokin 50 has pointed out, if I were a board member, this would be a definite thumbs down for me. Maybe I'm just getting to be a FUD in my dotage - or maybe, with age comes wisdom. Be careful with whatever you decide, but I think I'll pass. Adios, Pizza Bob
- Daily humor thread
-
Advice on not getting P2P in 30 days
No, and if it was a condition for getting your permits, it was illegal
-
Got myself a present
Sig recommends the use of CCI mini-mags
-
USPSA Special Classifier Match, Shongum, May 5th
I'm in
-
Timney Trigger for Mosin Nagant
You might want to PM usnmars for his input. He built an amazing Mosin and shot some amazing groups.
-
Gun transfer from NC
It's a bit of a hike for you, but I'd suggest Paul (PK90) at Arms & Ammo in Winslow, NJ.
-
Gun transfer from NC
One last thing: The gun does not have to be shipped by an FFL, only to an FFL. But you first want to make sure that the receiving FFL is OK with receiving from a non-FFL - it's a matter of choice, not law. If your receiving FFL is GTG, the seller can ship a long arm via the USPS. I have used Priority Mail insured, or you may want to go with return signature. Adios, PIzza Bob
-
Car Guys - Mount & Balance Alloy Rims - Where?
Because of my former employment, it has been a long time since I have needed to have tires broken down and new ones mounted and balanced. I am very picky and am looking for a shop - preferably in my area (west/central Jersey) that has real experience in mounting/balancing tires on alloy rims. I'd desire a shop with a "touchless", rim-clamp type changer, that actually uses the nylon "condoms" they are supposed to when working with alloy. Also want a shop with a Road Force balancer (GSP9700), again that knows how to use it properly, to balance a tire in two planes with tape-a-weights on the rear of the wheel only (I told you I was picky). The wheels are TSW 19" x 8" and the tires will be Michelin Pilot Super Sports 245/40R19. I'll travel some for the right shop, but the closer to home the better. What say you car guys? Who do you trust to do it right, with your wheels? Thanks. Adios, Pizza Bob
-
Walther PPS
Nitpicking as usual. Of the three rounds you have listed, the Winchester round is the "hottest" at 1185 fps. Next comes the Federal AE at 1150 fps and the slowest is the Speer Lawman at 1090 fps. Admittedly, on the Speer site, I could not find the SKU (53651) you had listed for any Speer cartridge. The 1090 fps was for SKU 53616. Speer Gold Dot 124 gr +P (23617) has a MV of 1220 fps. Adios, Pizza Bob<----has entirely too much time on his hands
-
this is what happens when matches get cancelled
I made one using 2" PVC, so I wouldn't have to whittle down the firring strips to fit in the verticle PVC legs. My base is u-shaped with longer extensions, and the T's for the vertical legs are female threaded. My vertical legs are fairly long, but since they thread into the base, it's easy just to screw them out for flat transport. Between the larger diameter PVC and the longer elements in the base, it is very stable as is - no additional weight needed. Made with one piece (10') of PVC pipe and the kid at Home Depot even cut all the pieces to length for me. Adios, Pizza Bob
-
Are guns cheaper at shops in PA?
I tend to naturally gravitate to the PA gunshops - that is as much a matter of geography as it is preference. Given my location, the PA shops are local to me. I am really surprised the to hear that Tanner's was more than SC - were you figuring total price? A handgun out of PA, while having to pay the transfer fee is devoid of tax (yes, I know, not technically, but let's say at the POS). Dependent on price, the tax savings can offer much more than just a shipping & transfer offset. I don't go running all over the place looking to save a couple bucks - but I have realized some significant savings by a little judicious shopping. It's more about who has what, when I want it, than it is about the geographic location of the shop. Adios, Pizza Bob
-
Plated vs Jacketed
Just a heads-up: Federal's "green" ammo is labeled - on the box and in all media pertaining to it, as TMJ - total metal jacketed. It is, in fact, plated, not jacketed. Not sure if this will make any practical difference in my application, but I did make them aware of my displeasure with their misleading labeling. Never heard back from them. They did inform me that the primer sensitivity of their "green" ammo is the same as their regular line, which was good to know. Adios, Pizza Bob
-
Multiple Handgun Purchase Exemption
In looking over the two forms necessary to apply for this exemption (SP-015 and SP-016) they indicate that they should be turned in at the same time as your application for your purchase permits. My question is, can I submit these exemption forms and use the exemption granted with existing permits already in my possession, or do I need to apply for permits to be used specifically with this exemption? Secondly, do I submit the two forms directly to the NJSP, or do they have to be submitted to my local PD, who in turn submits them to the NJSP? Thanks. Adios, Pizza Bob
-
PB was a Bad, Bad Boy - I'm blaming it on alec.mc
Ray, I was using Pachmayrs when you were just a gleam in your father's eye.
-
Carry at home?
Well no wonder you don't carry at home - who wants to lug around all that weight? I mean the helmet must go two pounds and the gun another pound or two. Don't the neighbors look at you funny? And doesn't it take longer than that .01% of your time to shower? Or is the helmet waterproof? :D
-
Revolvers: Fluted vs Unfluted Cylinder
Weight is a good thing....in the right places. Although, I think that the fluted vs. non-fluted is largely cosmetic, there may be enough weight removed from the cylinder to affect balance and ease of carry. As for the full underlug - that is about having weight in the right place. Muzzle "hangs" better for precision work and it dampens recoil for fast follow-up on the same target. Lighter muzzle may allow faster transition among multiple targets. While there are benefits to be had, it's most personal preference and "cool factor". JMHO Adios, Pizza Bob
-
PB was a Bad, Bad Boy - I'm blaming it on alec.mc
Yeah, but you've got big ham hocks for hands. Pachmayrs cover the backstrap and increase LOP. Here's when I'll buy a Governor...