Everything posted by Pizza Bob
-
Blackhawk Serpa (again)
Hey, hey! Hate on Serpas all you want, but leave Corvairs out of it. I met my future ex-wife in a Corvair.
-
need info on my 1944 Mauser K98 nazi sniper rifle
I think the point they are trying to get across is that the above picture is not of his gun. It is something he pulled off the Internet to better show what the eagle over the swastika proof mark looked like. Yes the picture may be Norwegian, but it's not his
-
Blackhawk Serpa (again)
What about the iTac? This holster uses the same type of retention device. iTac holsters are also sold under the name of Sig Sauer and H&K.. Adios, Pizza Bob
- Dum Dum bullets--yes, I know, another HP question
-
Dum Dum bullets--yes, I know, another HP question
I hadn't read the Aiken decision, but I find it interesting that the judge made that determination. If this sets precedence, then anything but FMJ's and solid cast bullets would be deemed the same as HP's - and in point of fact even they expand. The crux would be that they aren't necessarily designed or meant to expand. A pretty fine point on which to hang your hat. I found an old post I made based on a post I found on the PAFOA forum. This dates to March 13, 2009. IIRC, many people called me to task and said that it was a stretch - yet here we are in 2012 and the judges words echo this same reasoning. Here is the 03/13/2009 post... I think that many of us, myself included, have been laboring under a misconception about hollow-points, EFMJ’s, soft-points, etc. I know that all of the above are legal under the conditions defined in the statute, but the NJ shooter’s fear centers on inadvertently having a prohibited projectile in our possession; i.e. Had some in your pocket at the range and forgot to empty them back into your range bag; Or, Some fell out of your range bag while transporting and rolled under the seat – or any other scenario you can imagine. We seem to think that using EFMJ’s or soft-points or even cast bullets would preclude us from being prosecuted under the conditions described above. While perusing the PAFOA forums, I ran across this interpretation of the NJ “hollow-point statute”. The poster stipulated that this came from a firearm knowledgeable attorney whose opinion was sought when the poster was taking a security job in NJ. While the statute specifically names hollow-points, it also includes “dum-dums” as prohibited ammunition. The statute fails to define dum-dum. Using the current, contemporary definition, it is simply an expanding bullet. Wikipedia defines expanding bullet as… …an expanding bullet is a bullet designed to expand on impact, increasing in diameter to limit penetration and/or produce a larger diameter wound. There are many expanding bullet designs, though the most commonly encountered are the hollow point bullet and the soft point bullet. Thus, technically, you could be charged under the statute for possession of any expanding bullet ammunition possessed outside the strict parameters defined in the statute (from the POP to home, to & from the range, etc.). I would say that using EFMJ’s may be a hedge against any unpleasantness, as most LEO’s would think it was simply FMJ’ed ammo, based on its appearance. Curious to read what you think of the above. Maybe we should lower our sights a bit and push for some kind of ammo reform law. I have no problem with a statute that prohibits the possession of types of ammunition during the commission of a felony, but to make mere possession a crime is one step away from a complete ban. Ammo reform should go hand-in-hand with shall-issue carry laws in this state. Adios, Pizza Bob
-
First gun for a woman
His real identity IS Mindy. His alter ego is Ray Ray.
-
Newest Purchase - S&W 686
Only very early stainless Smiths (models 60 & 66) had stainless hammers. Smith found that SS was not really suitable for hammers, so switched to carbon steel that was case-hardened and then applied a flash coat of hard chrome to match the appearance of the SS gun. I'm assuming that what you are seeing is the deterioration of the hard chrome plating on the hammer. I think any attempt to correct it, especailly with abrasives, will only worsen the appearance. You would probably have to go pretty far to affect the case hardening as that was done to the carbon steel part prior to plating. I'd let well enough alone. Short of changing out the hammer or removing it and having it re-chromed, there is probably not much that can be done. Adios, Pizza Bob PS: While a 29 is nice, I was thinking more along the lines of a 24 or 25. As for a companion for your Marlin, I'd go short-barrelled SBH with the round trigger guard (you'll thank me) packed in a nice Tom Threepersons holster from El Paso Saddlery. Here's the gun... http://www.ruger.com/products/newModelSuperBlackhawkStandard/specSheets/0813.html Here's the holster... http://www.epsaddlery.com/pc-65-9-1920-tom-threepersons-2-to-7-12-barrels.aspx I love spending other people's money. PB
-
Reloading 5.56 NATO ammo?
From Wiki... The 5.56 mm NATO and .223 Remington cartridges and chamberings are similar but not identical. Military 5.56×45mm cases are often made thicker and therefore have less case capacity.[17] However, the NATO specification allows a higher chamber pressure. NATO EPVAT test barrels made for 5.56 mm NATO measure chamber pressure at the case mouth, as opposed to the location used by the United States civil standards organization SAAMI. The piezoelectric sensors or transducers NATO and SAAMI use to conduct the actual pressure measurements also differ. This difference in measurement method accounts for upwards of 20,000 psi (140 MPa) difference in pressure measurements. This means the NATO EPVAT maximum service pressure of 430 MPa (62,000 psi) for 5.56 mm NATO, is reduced by SAAMI to 55,000 psi (380 MPa) for .223 Remington.[18] In contrast to SAAMI, the other main civil standards organization C.I.P. defines the maximum service and proof test pressures of the .223 Remington cartridge equal to the 5.56 mm NATO.
-
Newest Purchase - S&W 686
I guess you're making it a shooter . It would appear that a previous owner took a file to your front sight. Since it shoots fine and you aren't worried about collectability, I wouldn't let it bother you. To a collector that would affect value. The "no-dash" stainless guns came with a raw stainless front sight. On subsequent engineering changes, Smith realized it was harder to see and changed them to a black front sight. Doubtful that stainless blades are still available. Beatiful gun. You're right - wheel guns are the nutz. Wait until you discover big-bore wheelguns Adios, Pizza Bob
-
need info on my 1944 Mauser K98 nazi sniper rifle
I know next to nothing about K98 Mausers, but I can tell you that people that do are going to want pictures. Lots of pictures. Especially any proof marks or any markings on the barrel, receiver or stock. Hopefully the previous owner didn't shoot it with corrosive ammo and then put it away. You're forgiven for being a Ford fanboy . Adios, Pizza Bob
-
Reloading 5.56 NATO ammo?
Sidenote: It's a little hard to compare pressures generated by the .223 vs 5.56 because SAAMI and the government (milspec for the ammo) take pressure measurements at two different points - so it is not an apples to apples comparison. There is no doubt that 5.56 generates higher pressures, but until the same testing method is used on both we really don't have a quantifiable difference. Adios, Pizza Bob
-
Smith & Wesson 617 optic question
Guns are made to be shot. If you can't see the sights, you can't shoot them. Throw an optic on there and it's a game changer. You young bucks will be singing a different tune when you get to be our age
-
ruger new bear cat
AFAIK, all Ruger S/A guns, since the mid-70's, use a transfer bar system.
-
Smith and Wesson M&P 9mm
As maks pointed out, there may very well be extractor and ejector issues because of the different case head size / breech face. Unless the manufacturer says it is a viable conversion - steer clear. Most manufacturers that do not use fitted barrels will approve of, even promote, the .40 S&W / .357 Sig interchange, since all that takes is a drop in barrel. Some aftermarket manufacturers make the .40 or .357 to 9 mm conversion barrels (most notably Bar-Sto for Sigs), but I really haven't heard anything about the viability of such a swap with the S&W. But then, I just recently found out thst S&W makes something other than revolvers . Caveat Emptor. Adios, Pizza Bob
-
1919a4 semi auto .308 rifle legal or not?
Legal, providing the conversion is performed correctly. Several members of the board own 1919A4's, but I'll let them "out" themselves if they choose to.
-
Analyzing progressively worse groups
I think that glennp and Vlad G both have credible reasons. The ones I find most likely are Glenn's fatigue and aiming point reasons and Vlad's free float and shooting rest reasons. Glann's are self explanatory, but Vlad's may bear some comment. If the barrel is not free floated, as it heats up the degree of interference at the pressure (contact) point changes as does your POI. As for the rest - shooting with a bipod can be tricky. For absolute best accuracy the bipod has to be "loaded" the same for each shot. Different loadings of the bipod can cause different barrel harmonics that can change the POI. Situation is exacerbated if the barrel not free floated. To "load" the bipod, I pull the stock into my shoulder and then apply slight forward pressure to preload the bipod. You try to do it exactly the same for each shot. Better accuracy will be had shooting over a bench rest with sand bags. Good luck. Adios, Pizza Bob
-
Purchasing a handgun online.
Before you purchase on-line, you need to make arrangements with a NJ FFL to receive your gun. Once the purchase is made, the NJ FFL has to send a copy of his license to the seller, who then ships the gun to your FFL. If buying from a private party, make sure your receiving FFL is OK with that - not all are. While you are paying the on-line source, you are not taking possession directly from them. You give your P2P to the NJ FFL dealer who receives your gun from the on-line seller. The NJ FFL completes and distributes the form as well as the 4473 (federal) and the NICS check. Transfer fees vary - check first. Adios, PIzza Bob
-
Reloading 5.56 NATO ammo?
Any body recommend the use of small base dies for reloading for an AR, or any SA rifle for that matter?
-
FDLE No Longer Accepting Paper, Ink Fingerprints
Interesting thought. Nothing on the FL Dept of Ag site yet. Wonder if Sagem Morpho would forward electronic prints to FL? It would suck to have to pay SM their pint of blood as well as FL's $I00+ fee. Oh well, I don't have to worry about it for another six years. I'm sure they'll have it sorted out by then.
- USPSA Match at Shongum, Saturday 4/7
-
PA revolver bequeth to NJ resident.....????
crow, I apologize for the misinformation I imparted earlier in this thread, but it would seem, after reading the balance of the thread that to pursue it further serves no purpose. You have the cite of the federal law that says it is permitted and here is the cite of the state law... 2C:58-3 j.Firearms passing to heirs or legatees. Notwithstanding any other provision of this section concerning the transfer, receipt or acquisition of a firearm, a permit to purchase or a firearms purchaser identification card shall not be required for the passing of a firearm upon the death of an owner thereof to his heir or legatee, whether the same be by testamentary bequest or by the laws of intestacy. The person who shall so receive, or acquire said firearm shall, however, be subject to all other provisions of this chapter. If the heir or legatee of such firearm does not qualify to possess or carry it, he may retain ownership of the firearm for the purpose of sale for a period not exceeding 180 days, or for such further limited period as may be approved by the chief law enforcement officer of the municipality in which the heir or legatee resides or the superintendent, provided that such firearm is in the custody of the chief law enforcement officer of the municipality or the superintendent during such period. Just have it shipped or go pick it up. It's yours. Adios, Pizza Bob
- USPSA Match at Shongum, Saturday 4/7
-
Is Anyone Interested in a USPSA / IDPA Introduction Class?
To those of you that have expressed an interest in attending this Saturday's (4/7) USPSA match and have asked about pre-registration: As has been stated it is just a walk-on match, but if you know you are attending, they would appreciate knowing that by you e-mailing Ron Guman the MD at [email protected] Plus, this puts you on the e-mail list should there be a last minute cancellation for weather or other reasons. So if you know your going, please drop Ron a note by 8 AM on the Thursady before the match. See you there. Adios, Pizza Bob
- USPSA Match at Shongum, Saturday 4/7
-
Smith & Wesson 617 optic question
Go small with either a Burris Fast Fire or a Leupold reflex sight. All new S&W revolvers (K, L, N & X - frame) are drilled through the top strap for optics mounting. Remove the rear sight assembly and you use the one hole that the sight was screwed into and another will be revealed when the sight is off (open cylinder and look at the underside of the top strap. The small reflex sights do not look as out of place on a revolver as a full size red dot. JMHO Adios, Pizza Bob