Everything posted by Pizza Bob
-
VZ Grips?
G-10 grips (any brand) are the nutz! The grip that grips you back.
-
Best 22 revolver???
??????????? The S&W kit gun traces its heritage back to 1911 when the initial shipment of Bekeart .22's was made. They were built on the I-frame, which became the J-frame. Currently they are the model 34 in the blued version and the model 63 in the stainless. I have a pre-model 34 dating from the 1950's. Is there something new? Adios, Pizza Bob
-
1903 Remington BLOW-UP
One of the low-numbered receivers that were improperly heat-treated maybe? Although it looks like the receiver held-up and the blast was directed down through the magazine.
-
Steyr M9-A1 for a good price
Axeman: Steyr did not change the model designation when the upgraded to the latest generation. The military contract guns do NOT have the updates - which were supposed to have improved reliability and did improve the trigger - of the latest production. This is why I worked closely with Paul when I ordered mine, to insure I got the latest and greatest, and not one of the military contract guns. Adios, Pizza Bob
-
Steyr M9-A1 for a good price
Be an informed consumer. I bought the newest version to avoid the known FTE problems and wound up with them anyway. Resolved now and I love the gun, but in good conscience, I'd be hard pressed to recommend one to someone unless they bought it with their eyes wide open. Here's my original post... http://njgunforums.c...at-have-i-done/ ...and here's the one after the resolution... http://njgunforums.c...-in-love-again/ Dan has purchased one of the DW Arms military contract guns, but has yet to shoot it. I'm looking forward to his report. There is no rhyme nor reason as to which guns will function and which will run flawlessly out of the box - so it's a crap shoot regardless which you buy. The wild card is, I have no idea of the warranty status of the PW guns since they weren't imported through Steyr USA. My guess is that they will stand by them, but for those with the same concern, a phone call to Steyr USA might be in order. Adios, Pizza Bob
- 9mm 1911
-
Military-Grade Optic for $300-400 ?
How about this one.... http://www.oakhillenterprises.com/ItemDetails/700653074/Burris_MTAC_1_5_6x42mm_ILL_Ballistic_CQ_NE.htm Within your price range. Well respected optics company. Nice range of adjustment w/illum reticle. Same vendor has Burris' P.E.P.R. mount. Just a thought. May not be milspec, but they make decent optics. Founders of Burris were former Leupold employees. They have been around for quite a while now. I have two of their pistol scopes (one mounted on a .44 mag) that have withstood the test of time and use. Good luck. Adios, Pizza Bob
-
extending a pistol permit
It is extendable (providing you CLEO will cooperate) for another 90 days. 180 days, total, from date of issue.
-
Pepper spray illegal in NJ?
There are two "shots" in the Kimber, and they are more a gel than a spray. The combined total of the two shots is <.75 oz. and therefore legal. Adios, Pizza Bob
- New .357
-
Home security systems
I'm getting a rescue panther. I'm old and don't need that much sleep anyway.
-
Ruger Mini 14 Tactical NJ Legal?
As long as the flash suppressor is permanently attached, that is perfectly legal. I don't recall Ruger ever selling an SBR version of the Mini. Adios, Pizza Bob
-
Please stop buying Serpa holsters
He also trains clearing his house with a shotgun with live ammo at 3 AM.......doh!
-
Priceless
That thing has been floating around the Internet for years
-
Shongum - USPSA - 03/03/2012
Ron sent out the e-mail announcing the above - weather permitting of course. Here's Ron's note: March Match is Saturday, March 3rd. Pistol match is 100 rounds. Registration is 9:30am Help with setting up and packing up is always needed and appreciated. There will be a shotgun side stage after the pistol match of 15 rounds birdshot 7.5 or smaller. NOTE: If you plan to attend, reply to this email [email protected] and let me know by Thursday, March 1st, 8am. If you are new and need the safety briefing be there by 9am and let Karen know at registration. If the match is cancelled for weather, I will send out an email notification around 5pm on Friday. I'm in. Who else is coming? Adios, Pizza Bob
- OBRPC Feb 26 USPSA match
-
Aguila .45 ammo??
Just a heads-up: Aguila is Remington's Mexican affiliate. Not judging one way or the other - just throwing it out there so you can make an informed decision.
-
New grips for my S&W 617 .22 revolver?
If they are the grips as showm on S&W's website, I think those are Uncle Mikes. Hogues have a bit more of a palm swell, but Pachmayr Grippers are larger yet, as these cover the backstrap... http://www.pachmayr.com/home/gripper-grids.php
-
Newbie
Welcome - great to see the forum populating with more old farts. Gotta keep these whippersnappers in line. Adios, Pizza Bob
-
New grips for my S&W 617 .22 revolver?
It would help to know what grips are on the gun now. Saying the ones it came with is of little help, since S&W switches off every now and then. I prefer Hogues, but that may be what you have. As for rubber grips: Hogue; Pachmayr; Uncle Mike's; Trausch. Adios, Pizza Bob
-
Mounting a Scope On a AR
That is a Troy rear sight and the front is a MI folding HK-type, mounted on the gas block. Front sight is really immaterial as you'll never see it through a scope. Adios, Pizza Bob
-
Swapping Revolver Cylinder Assemblies
I would assume so as there have been factory revolvers in the past and currently that are set-up this way. Timing is affected by both the cylinder and the fire-control components in the gun. Theoretically the bolt notches in the cylinder are always 60 degrees apart for any six-chamber cylinder or 72 degrees for any five-chamber cylinder, but with production tolerances and the number of moving components that affect timing and cylinder lock-up, it will take a skilled gunsmith. I doubt that you will find someone locally to take on this task. Someone like Hamilton Bowen could do it, but it won't be fast and it won't be cheap. If switching back & forth isn't an issue, you would be further ahead to just buy two guns of the same model (SP101's) in the two calibers you desire. Remember, anything can be done providing you have enough time & money - the question is: Is it cost effective? Adios, Pizza Bob
-
Mounting a Scope On a AR
Rather than a one-piece mount (rings & base inclusive), I prefer to use a QD riser and then mount the rings to the riser. That way you are not "locked-in" to a particular ring height, you can use separate rings of the height you need to establish proper cheek weld or component clearance for your optic of choice. Here's a Larue 5/8" riser and TPS low rings Adios, Pizza Bob
-
Much to my Chagrin...
If you would consider a rimfire (you did mention one in the OP), then look at the .17 Hummers. Inexpensive ones like the Savage or Mossberg or medium priced ones like the CZ. And if you want a nice small caliper centerfire, look at the CZ 527 - it's a mini-mauser action. Mossberg also has a new .223 BA coming out that accepts AR mags. Just some thoughts. Good luck with whatever you decide. Adios, Pizza Bob
-
Mini 14 questions
The bullpup stock may not be the answer. Probably will not solve your problem. While it makes the OAL of the gun shorter - it may not change the LOP (length of pull - distance from the butt to the trigger) at all. And now that you are at 26.5" (.6" from illegal) you have no room to shorten the LOP - even if you could (possible mag interference). Looked at some pictures of the mini-14 flash hider. Looks like it slips on and is cross-pinned behind the front sight. Adios, Pizza Bob