Everything posted by Pizza Bob
-
Suggestion for 22lr pistol for the wife
Is that 622, that Lunker told us about, still available at Shore Shot? Of my six .22 handguns, my 422 was the one my SO chose to take her First Steps class with. IIRC, the price on the 622 at SS was a steal. Adios, Pizza Bob
-
Is a CZ 455 American a good first rifle?
Given your criteria, I'd say that you are dead-on in your choice. I bought my first CZ (centerfire) two weeks ago and I'm really impressed with the quality. The beauty of the 455 American is the interchangeable barrel system. You may want to consider the combo-pack consisting of one receiver and two barrels - .22 LR and a .17 HMR (you state that one of the uses would be varmint shooting on the family farm - none finer than the .17 HMR for that). Really seems that you have given this some thought, and come up with the right answer. Much preferrable to the 77/22. You get the "Pizza Bob Seal of Approval" - which only means that given the stated criteria, I would have reached the same conclusion. Good luck and have fun. Welcome to the forum, BTW. Adios, Pizza Bob
-
Wicen's Range / Furlong, PA
Thanks. That answered one of my questions. I'll PM the guys in that thread to see if they can enlighten me as to the other. Adios, Pizza Bob
-
Say it isnt so!!
Must have been Photo-shopped
-
Wicen's Range / Furlong, PA
Anybody ever shot there? I've known about it for years, but never investigated. I now realize they are less than 13 miles from my house. They are a public range and have a 25 yard handgun range and a 100 yard rifle range, as well as facilities for shotguns/clay birds. They charge a $15 daily fee. You do have to get a "Safety Badge" for each firearm type you are going to use (rifle / handgun / shotgun). This is a onetime fee of $7 per badge. I had a couple questions and I e-mailed them, but have yet to hear back. I wondered if there were intermediate backstops, say at 25, 50 & 75 yards, on the rifle range, and 7, 10 & 15 yards on the handgun range. I also wondered if once you pay the daily fee you can leave and return throughout that day. Anybody know the answers to these questions, or have any comments about the facilities, people, etc.? Thanks. Adios, Pizza Bob
-
Getting a muzzle brake pinned quickly in NJ/PA?
South of your target area, in NJ: Paul (PK90), maybe? North of your target area, in Quakertown, PA, Donley's maybe? Worth a shot. Good luck. Adios, Pizza Bob
-
My first revolver
Welcome to the wonderful world of wheelies!
-
Must See:The Never-ending Saga of Firearms in New Jersey
A copy of that needs to be sent to every member of the NJ legislature. Also our esteemed governor and his minion, Paula Dow.
-
Firearm Purchasing Requirements as it applies to NJ Resident
Incorrect. You can get a P2P without an FPID. It's the same application and process, so for $5, most people get the FPID and the P2P's ancillary to that. But you can simply get a P2P - regardless what your local PD may tell you. Show me a cite that says you have to have a FPID in order to get P2P. :thsmiley_deadhorse: Adios, Pizza Bob
-
slide fire stock
Check out posts #27 & 28 in this thread... http://njgunforums.com/forum/index.php?/topic/27889-franklin-armory%e2%80%99s-new-ar-15-is-neither-a-pistol-nor-a-rifle/page__st__20 Looks like Paula Dow has already put the keibash on it.
-
CZ 527
Were you using the trigger on the 527, from the "set" position? They have single set triggers (at least mine does) - push it forward until it clicks and then just barely touch it. Haven't had a chance to get to the range yet, but soon. Here's mine... http://njgunforums.com/forum/index.php?/topic/27885-early-christmas-present/page__p__364489__fromsearch__1#entry364489 Love the looks and the quality. Adios, Pizza Bob
-
Steel Targets - Who's good?
Alec: If he doesn't respond to this thread, try PM'ing Bry@n. He just got a new steel target from someone in the King of Prussia area. Adios, Pizza Bob
-
My first revolver
Revolver rounds are usually rimmed cartridges (.38 Spl / .357 Mag / .44 Spl / .45 Colt). The gun headspaces on the rim of the case and the extractor fits under the rim to kick the empties out of the cylinder. Some revolvers are chambered for semi-auto pistol rounds (9mm / 10mm / .45 ACP) which are rimless cartridges. Without the rim, there is nothing for the extractor to push against to extract the empties. A full-moon clip is a circular piece of metal with cutouts that fit in the extractor grooves of the rimless cases. (Picture worth a thousand words)... Are you still with me? Through the use of full-moon clips you can load all six rounds at one time. The clip stays with the cartridges in the gun - there is nothing to discard, the way there is with a speedloader (a device for loading 6 rimmed revolver cartridges at a time. It holds them in the correct pattern to insert into the cylinder partially, at which time some sort of release is activated to allow gravity to complete the loading process. So a speedloader requires three motions - insert, release, discard. A moon-clip only one - insert). In competition there was a perceived advantage of using moon-clips vs. speedloaders (as outlined above), so some ingenious person came up with a way to machine the rear of the cylinder, on a revolver chambered for a rimmed cartridge, to accept moon-clips. The beauty of this is that you can still shoot the gun, and get reliable ignition, without the moon-clips should you want to. IMHO, I think that before it becomes worthwhile to undertake that modification, you should be awfully good with that wheelgun, because we're talking about fractions of seconds saved by using moon-clips as opposed to speedloaders. Speedeloaders are also a lot less expensive (Midway has Safariland speedloaders on sale this month). One final historical footnote - moon-clips are a relatively new device. The original clips were called half-moon clips and were developed early in the 20th century for use in military 1917 revolvers chambered in .45 ACP. Revolvers were issued because they couldn't produce the relatively new 1911 handgun fast enough, and half-moon clips allowed the use of .45 ACP in a revolver, so there was commonality of ammo. While full-moon clips hold the case on its inside circumference, half-moons fit in the outer circumference - again, a picture... That's your lesson for today. Aren't you glad you asked?? Adios, Pizza Bob
-
My first revolver
Great first choice. Enjoy.
-
Incidedent in Pennsville nj
Perfectly within his rights to carry within his apartment - it is his residence. If the story is accurate (and they seldom are) he was carrying in the common (public) area, which would be a no-no. Adios, Pizza Bob
-
Express Police Supply
IIRC, CA's AWB (wow, three acronyms right off the bat) is specifically aimed at centerfire guns, so the provisions do not apply to rimfires. The 10 rd mag limit is a separate statute. I believe the telescoping stock is functional, but not 100% sure.
-
Joining the cool people club
It also acts as ballast. When I'm planted, I'm planted. Some of these skinny-a$$ed kids would blow away in the slightest breeze - between my natural ballast and the 15 loaded magazines that I can fit on my belt, I'm not moving. I was really disappointed when the cancelled the USPSA match during hurricane Irene - figured I would have had a real tactical advantage, once the windspeed got above 50 mph. Adios, Pizza Bob
-
Sight Question
Depends on the gun. Sig, for example, uses dovetailed sights and makes a variety of both front and rear sights. Dawson Precision makes sights for a variety of guns... http://www.dawsonprecision.com/ scroll down the menu on the L/S. If you are talking about a gun like a Colt SAA, then it's time to get out the file and the barrel blocks. Where there's a will, there's a way - some are just easier than others. Adios, Pizza Bob
-
Refinished AK wood furniture!
Yeah I can guess whose it is. It's a good thing we weren't fighting the Russians in WWII because then he'd be terribly conflicted. Furniture came out beautifully. Adios, Pizza Bob
-
NJ Legal Muzzle Brakes?
Door-breachers stand-off further and are generally used on shotguns to take out the hinges and lock mechanism. Toothed compensators are more a CQB anti-personnel type thing.
-
S&W 622 for $125
That's a hell of a deal. I have a 422 (blued version - "6" indicates SS) Target and it is a sweet shooter. Was the 622 a 4" or 6"? Adjustable sights (target model) or fixed? Either way, that's a great price for someone looking for a plinker. Adios, Pizza Bob
-
NJ Legal Muzzle Brakes?
If you meant to say "too small", then I'd have to ask, too small for what? Yes, if you have a 14.5" barrel and you need the extra 1.5", then it may be, but it would be close. As far as effectiveness, not sure that is a function of size. Yes, there are brakes with more expansion chambers (thus longer), but not sure that makes them any more effective. Once that main "ball of gass" hits the first obstruction and is diverted, how much more is there? There is no definition of what a "NJ legal" brake/comp is. Rule of thumb says that if the exit hole of the device is only slightly over bore size, it is a brake/comp. If the exit hole is wide open - to the diameter of the device, it is a flash hider, or at least NOT a comp/brake. Good luck. Adios, Pizza Bob
-
Travelling to NJ for work
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^THIS^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Or slightly farther north in the Washington Crossing area
-
Applying for FID in Kearny, NJ
Disagree. The bureaucracy created the framework of laws under which the loacl PD's/officers have to operate, but the time delays are almost exclusively foot-dragging by your local dept. Hence project compliancy.
-
nj legal upper
Huh??? Well, you asked. Can't see the undeside of the gas block, so I can't tell if it has a bayonet mount - but unlikely. It has what appears to be a standard A2 birdcage flash hider, which is a no-no and needs to be swapped for a pinned comp. That would be it as far as legality goes, but consider - you will have to spend additional money (beyond what you spend for compliance issues) for sights. That can be anywhere from $60 for a plastic set to $240 for a good set of folding Troys. And/or money for an optic. The barrel is Chrome moly and not chrome-lined. I think you can do better with an upper with branded components. JMHO, and I am the farthest thing from an AR expert - many on here are way better qualified than me to pass judgement/make recommendations - so wait to hear what they say (if indeed your OP was actually addressed to me - not like Bob is a unique name). Adios, Pizza Bob