Everything posted by Pizza Bob
-
Red Bank requiring in person interviews now?
It is anything but shall issue. You are correct in thinking that there is specific disqualifying criteria, but among those is a character clause, which gives the issuing authority all the discretion that it needs. Adios, Pizza Bob
-
SIG 1911-22
I just purchased a Sig 1911-22. Haven't shot it yet and will probably wait until I change out the arched MSH for a flat one (ordered the same day I got the gun), which will also remove the mag disconnect safety. It's my understanding that the dovetails for the sights are proprietary and at this time, only an aftermarket front sight is available. It is a FO from Dawson Precision and runs about $39. Not sure what you mean by "delicate" - light yes, delicate - hmmmm, what do you intend to do with/to it? And the mags are metal, rather than the plastic junk you would usually get with an inexpensive rimfire. Looking forward to some time on the range with mine and, probably, some rimfire action shooting. Adios, Pizza Bob
-
ccw in pa
If you reside in NJ you cannot get a PA non-resident license without first obtaining a NJ CCW. However, if you have a license from a state with reciprocity with PA (FL, UT, etc), then there is no need to have a PA non-resident license in order to carry there - and that's ANYWHERE within PA borders (except of course for the usual statewide prohibitions - courthouses, schools, federal buildings). HTH Adios, Pizza Bob
-
Purchasing a Black Powder Rifle in PA
While IANAL, and didn't even stay at a Holiday Inn Express, I have to disagree. Just for clarity's sake, you have quoted from the NJAC, not the statute - they differ slightly in content but not intent. Here is the statute that defines a firearm - 2C:39-1 paragraph (f) "Firearm" means any handgun, rifle, shotgun, machine gun, automatic or semi-automatic rifle, or any gun, device or instrument in the nature of a weapon from which may be fired or ejected any solid projectable ball, slug, pellet, missile or bullet, or any gas, vapor or other noxious thing, by means of a cartridge or shell or by the action of an explosive or the igniting of flammable or explosive substances. It shall also include, without limitation, any firearm which is in the nature of an air gun, spring gun or pistol or other weapon of a similar nature in which the propelling force is a spring, elastic band, carbon dioxide, compressed or other gas or vapor, air or compressed air, or is ignited by compressed air, and ejecting a bullet or missile smaller than three-eighths of an inch in diameter, with sufficient force to injure a person. The highlighted portion pretty well defines the workings of a black powder firearm. You, essentially quoted paragraph (a) of 2C;39-1 and hang your hat on the sentence, "...which does not fire fixed ammunition regardless of date of manufacture." Which on the surface is contradictory to paragraph (f). However, you have to include the entirety of paragraph (a) in order to arrive at the correct interpretation. Here is the entire paragraph (a) - I've highlighted the sentence that negates your reasoning: "Antique firearm" means any rifle or shotgun and "antique cannon" means a destructive device defined in paragraph (3) of subsection c. of this section, if the rifle, shotgun or destructive device, as the case may be, is incapable of being fired or discharged, or which does not fire fixed ammunition, regardless of date of manufacture, or was manufactured before 1898 for which cartridge ammunition is not commercially available, and is possessed as a curiosity or ornament or for its historical significance or value. If the flintlock or cap & ball firearm you purchase is to be strictly a "wall hanger", possessed as a curiosity or ornament or for its historical significance or value, then no COE or FPID would be required - it is an "antique firearm" by definition. If, however, you intend to actually use it, it now falls under the definition of a "firearm" with all regulations attached. I think that you would be hard-pressed to find a NJ FFL that would sell you a BP firearm without an FPID and COE, regardless of what you claim your intent is for the firearm. OTOH, you probably could do so in PA. Not sure where that leaves you legally, but it's quite clear that if your BP firearm is to be used, it meets NJ's definition of a "firearm". Splitting hairs, I know, but that's the way NJ is. Adios, PIzza Bob
-
VF Show is moving
Their website gives up no info as to where the December show will be - just says check back for info. So this next weekend's show (9/16, 17 & 18) will be the last at the convention center. As to the reason for the move, I've heard that the floor space currently utilized for the gun show (and many other trade shows and events) will be converted into a casino. Going to leave a big void. Someplace like the PA Convention Center (Oaks) may take up some of the slack, but I wonder about the issue of gunshows since they already have a promoter (Eagle Arms) using that site for gunshows. Adios, Pizza Bob
-
Glock to Replace Gen 4 Mainsprings - Free
- Glock to Replace Gen 4 Mainsprings - Free
My understanding of the press release is that it is.- USPSA Match at Shongum
I'm planning on attending this match. Looking for someone to ride along. If you are close to me (I'm about 2.5 miles north of where I-95 crosses the DE River between PA & NJ) , or south of me and want to go to this match, just PM me. I expect to leave my house at 8:30 AM Saturday. If you are new and need the safety check, I can accommodate you - we'll just leave half an hour earlier. Adios, Pizza Bob- Glock to Replace Gen 4 Mainsprings - Free
Not that I'm aware of. The replacement looks like the current concentric spring arrangement, only two fewer coils on the outer spring. Don't know if the inner spring is changed. Supposedly makes it easier to rack the slide (consistent with removing two coils).- Glock to Replace Gen 4 Mainsprings - Free
GLOCK ANNOUNCES VOLUNTARY REPLACEMENT OF RECOIL SPRING ASSEMBLIES IN GEN4 PISTOLS Replacement Program Limited to Gen4 Model with GLOCK Covering All Shipping Expenses SMYRNA, GA – September 7, 2011 – GLOCK Inc. announces that it is voluntarily exchanging the recoil spring assembly (RSA) on its new Gen4 pistols shipped since August, 2009, to ensure each pistol’s performance meets the company’s demanding standards. With several variations of the RSA in the market today, GLOCK’s goal with this voluntary exchange is to standardize the RSA to gain the best possible performance in each pistol. GLOCK’s product development team has modified various elements of the RSA. The new RSA compensates for all design modifications made to the Gen4 and allows the pistols to function up to GLOCK’s rigid quality standards and reliability goals. Consumers should note that Gen4 G26 and G27 models will not require a modified recoil spring. “We are moving proactively and quickly to standardize this part of the pistol. This is a voluntary exchange specifically for the new Gen4 models,” said Gary Fletcher Vice President GLOCK Inc. “We have developed a program for consumers to send in their existing recoil spring assemblies and receive new ones at no cost.” The replacement of the Gen4 pistol RSA can be performed as part of the regular field-strip process; consumers do not need to take the Gen4 pistol to an armorer. Consumer’s wishing to participate in the exchange program are urged to call 1-877-745-8523 to order their new recoil spring. For more information on the details and shipping requirements on the replacement program, visit www.teamGLOCK.com.- Question about buying from a relative.
You do not need a FPID to buy handgun ammo. A valid copy of a P2P will suffice - you may have a hard time to get a retailer to agree, but that's the law.- The Perfect Storm
Let's review: 9/10 - USPSA at Shongum (plus shotgun side stage) 9/10 - IDPA at SJSC (with some three gun stages) 9/11 - USPSA at CJRPC (includes four classifiers) 9/11 - Three Gun Zombie Match at OBRPC How much spousal ill will will result from this weekend? Adios, Pizza Bob- Article: CCW for LEOE's
You need to clarify that statement. (KD, correct me if I'm wrong) The faction of LE that comes out against CCW "time and time again" is the upper echelon - the chiefs and commissioners, the ones that have to play the political games to keep their jobs. Blue state, blue mayors, blue chief LEO's - that's the political reality. The rank and file LEO is generally for citizen carry or has no opinion. The problem is that when a political candidate says he has such & such a LE organization's endorsement, Joe Schmoe takes that as meaning the police are in favor of that candidate. The general populus is not intelligent enough (or just too apathetic) to distinguish who is endorsing who, or what organization is in favor of what. Adios, Pizza Bob- Official Precision Rifle Picture Thread
First, let me say that I think Eric has shamed us all - and I haven't even seen the other postings. That is a fantastic group and the rifle is only half the equation. Almost embarrassed to post mine. Here's the rifle - it's a Howa 1500 Axiom in .308 Win. The scope is a Bushnell Elite 4200 Tactical 6-24X50, 30mm tube mounted in TPS rings on an EGW 0 MOA rail... This five shots (trust me, I know it only looks like three, but it's five) at 100 yds. Measures .701" And this is at 200 yards. Four shots went into .607" and the flyer opened it up to 1.901" (don't you hate it when that happens?), still under 1 MOA... Lastly, my precision AR - don't have any group pictures for this one, but I have shot under 3/4 MOA when I had the A2 stock and a Bushnell 3200 scope on it. Currently it is a RRA Varmint w/ .920" SS barrel (16"), Magpul PRS stock with Accu-shot monopod and a Harris bipod. Scope is a Konus 4-16X44 in Burris 30mm signature rings, mounted on a LaRue 5/8" riser... Enjoy! Adios, Pizza Bob- ccw in pa
Please note that the UT permit is no better (or worse) than any other permit from a state with which PA has reciprocity. The states mentioned as "approved" by Philly are listed in their illegal ordinance and if you read that ordinance in its entirety, the "approved" permits only come into play after being reviewed by a competent court - which means after you've been (illegally) arrested. At the point a competent court reviews it, the whole mess will be thrown out / charges dismissed, due to preemption. In PA only the state can formulate firearms laws, and only the state can enter into reciprocity agreements. You are GTG with any permit/license recognized by PA, anywhere in PA. Adios, Pizza Bob- First Purchase
Jim Flynn @ Jim Flynn's Truck Repair. He's in Glenn Gardner on Rt 31 (southbound side). Not a big fancy gun shop with lots on display, just a great guy with a decent inventory, great prices and a friendly attitude. When I buy a Sig, that's where I go. HTH Adios, Pizza Bob- my 1st lower build.. and new 14.5" Middy
You don't want to make too good. You may need to prove that it is permanently attached - if they can't see the weld, who knows what lengths they'll go to to check. Just sayin' Adios, Pizza Bob- CCW rigs, what do you have and use
Works great. Just a holster mounted to a flat wallet-size square of leather. Slips into the rear pocket. Only difficulty was changing the way I used to carry my wallet etc. It would look pretty dumb to have the outline of two wallets in your hip pockets, so I went to a combo card-carrier / money clip and carry it in my L/F pocket. Keys and change in R/F pocket. Normally nothing in either hip pocket, but when I opt to carry the LCP, it looks normal to have a "wallet" in the right hip pocket. Adios, Pizza Bob- CCW rigs, what do you have and use
Primary is this... Sig RCS with Davidson G-10 grips. Sparks Versa Max II horsehide with shark trim. Beltman 1.5" basketweave belt. Otherwise it depends on how I'm dressed. Went to a wedding last week, carried my S&W 638 in a Galco ankle glove. Also have an LCP in an Uncle George wallet holster, for when I'm feeling minimalist. Others also, but these are the main ones. Adios, Pizza Bob- Will Hurricane Katia Hit Us?
God, I hope not. I just got done spending $200 replacing groceries ruined in the last hurricane induced power outage.- Camden Chief Issues P2P's to Prohibited Person
Regardless of how anyone "feels", the law is quite clear. He was a prohibited person, period. As far as the chief not knowing about it due to an administrative error, or, as some on here have surmised, it didn't come up in the background check, the telling sentence in the article is... "...the inquiry began after a Camden police officer told state police that Thomson was made aware of Jenkins' record when he signed the permits. " There is no mention of expungement, so why would you assume that? What was mentioned was that he received welfare because he was out of work. He went back, but his wife continued to draw public assistance - what's wrong with this picture? He seems to have done OK for himself, so I'd hardly say it ruined his life - it may now have a secondary impact since he has once again broken the law. He was denied a gun permit, not a livliehood or anything else deemed necessary to survive. Sorry to sound harsh, but I really am surprised at the support he seems to have found on this board. Adios, Pizza Bob- Camden Chief Issues P2P's to Prohibited Person
Article here... http://www.philly.com/philly/news/lo...mpid=124488459 Politics at its best in Camden. It says they performed a background check. Tell me his conviction didn't show up. So we have the chief committing a crime by issuing to a prohibited person and the councilman for lying on the STS-33 application. Says all this is being investigated - it's going to take an awfully big carpet to sweep this under. They are already laying the groundwork for that to happen by saying the councilman gave the permits back....no harm, no foul. And the police chief said it was an "administrative error" - yeah, that works. Adios, PIzza Bob- pistol permit app.
(2)a collector of handguns as curios or relics as defined in Title 18, United States Code, section 921 (a) (13) who has in his possession a valid Collector of Curios and Relics License issued by the federal Bureau of Alcohol, Tobacco, Firearms and Explosives; The reason the exemption is granted is because they are curios or relics. If you are going to buy multiple modern arms (or just those that don't qualify as C&R) then you need to file for the exemption. Just as you can't use your C&R license to purchase non-C&R firearms directly, even in a free state. I understand what you are saying, but I believe the inferrence is as I stated. If you can find an FFL to go along with you, more power to you. Since Paul is an FFL, I'm curious as to what he has to say on this specific issue. I know I tend to be too paranoid sometimes - comes from living in this state for 33 years. Adios, Pizza Bob- pistol permit app.
Absolutely, providing they are a qualifying firearm, as defined by the federal statute cited. That is exactly what it says. Adios, PIzza Bob Usual disclaimer: IANAL- pistol permit app.
Since they are making this a condition for obtaining your permit(s), it's illegal under the previously posted statute. Plus, if this is meant to be informative they seem to have neglected to inform you that multiple handgun purchases are still possible, outside the framework of OGAM, if you file for an exemption with the NJSP. I'm sure that Paul will add his thoughts also. Adios, Pizza Bob - Glock to Replace Gen 4 Mainsprings - Free