Everything posted by Pizza Bob
-
LabCorp - gun ban sign on door
It's facing out, you're seeing the reflection of the road,
-
Original Air Marshall Qualification Test
Interesting that you should mention that. I got an interesting speedloader from my Sky Marshal friend. It was a strip that wrapped around the ammunition and had a claw on the end (like a military sling) to close it with a tab on the claw. You inserted the bullet noses into the cylinder and pulled the tab - spinning the cylinder (kind of like starting a lawnmower) and releasing the rounds. It was loaded with .38 Spl Super Vel hollowpoints. I still have it around here someplace. Adios, Pizza Bob
-
LabCorp - gun ban sign on door
Here you go. From a bank in Texas...
-
The NJ2AS Sues The State Police
Most of the variables are a result of the local PD being empowered to do an "investigation". Most of the investigatory process is spelled out exactly in the guide (what data bases are to be checked, etc), and the amazing thing about it is that most of the "investigation" is to be done at the time you turn in the application - while you are still present. However, there is enough "wiggle room" in what constitutes an investigation that all the PD's use this to hide behind when they get called on procedures. Here are some of my pet peeves: We all know about the 30 day statutory completion requirement, just as we all know about the court case that pretty much gutted that law. However, IIRC, it was because the local PD could not be held accountable for the length of time it took to get the FBI background check back and the court started the 30 day clock from the receipt of the info at the local PD. So where is the accountability? How do we know when the request was submitted and when the info was returned. This is the electronic age and background checks are more a matter of pressing buttons than anything else. We need transparency in the process. Some kind of on-line tracking mechanism that shows receipt of app at the local PD and then a checklist of when it was sent out, when the results were returned, etc., so we can keep tabs. I know the reality is a manpower and cost issue, but PD's that limit when they will accept applications, and worse when you can get the paperwork (I know that a lot of it is on-line, but the only place you can get a 212A request is at the PD) just burns me up. At the very least they should accept completed apps at anytime - afterall, PD's do operate 24/7. Of course if we are going to hold their feet to the fire and insure that those items of the investigation that are to be done during our presence are actually done, then this becomes more difficult. There is just so much room for improvement with this system, that we would be further ahead scrapping it and starting with a clean sheet, taking into account today's technology. Which to my way of thinking means we walk into a gun store, pick the gun we want (long gun or handgun), show our drivers license, fill out the 4473, wait while NICS is called, pay and walk out with our purchase. Why should it be anymore complicated than that? Adios, Pizza Bob
-
I looooooove my S&W 1911!!!
Ron got it right. It's not about the caliber, it's about the platform.
-
Original Air Marshall Qualification Test
I believe this would be the original test given to the current iteration of FAM's - since they became part of Homeland Security. The original FAM's were part of the Treasury Dept (I believe ATF) and date from the 70's. They carried Charter Arms Bulldogs in .44 Spl - which would make this test nigh impossible to pass. I know a FAM from both the 70's and current programs (actually a lot of you northern NJ'ites know his wife, but I would never out him on a public forum). I also have a friend that was a recipient of a lot of once-fired nickel-plated .44 Spl brass from the original program. I believe that current FAM's carry P229's in .357 Sig. They were going to change to P250's but something derailed that change, and it's an assumption on my part that they stuck with the P229's. Adios, Pizza Bob
-
What gear do you use
I think the Tech-Lok comes standard with that holster. Nice in that you don't have to thread it on the belt and Vlad's right, it does work quite nicely.
-
Sig P220
RUN !!!!!!!!!!!!!!!!!!!!! It's the beginning of the Signess
-
IDPA @ Somerset, Sunday 5/15/11
Planning on being there
-
Selling a legal NJ gun to an out of state resident
Shipping and transfer of handguns is regulated federally, regardless where your father lives. A handgun must be transferred through a FFL holder in the state of residence of the recipient. It does not need to ship from a FFL, a private citizen can ship a handgun to the receiving FFL, but only by overnight (maybe 2nd day air - not sure) freight, like UPS or FedEx. If you have a FFL ship the gun for you, they can ship it via USPS - which may save you some money even including the fee the FFL would charge you. It would be delivered to your father through the books of the FFL in his state of residnece, adhering to all relevant state laws. HTH Adios, Pizza Bob
-
UT and FL CCW class May 22, 2011
The law came about because of the Philly politicians wanting to close the "Florida Loophole", a term that they and the MSM created - as none really exists. In Phila County (which encompasses the city of Phila) the city PD is responsible for issuing a PA LTCF. They, not unlike NJ, read all kinds of preclusional criteria into the law - like denying someone with unpaid parking tickets, or someone who was the victim of a firearm theft. Conditions that would not result in denial under the law in any other jurisdiction in the state. Most denied applicants, rather than expend the money to appeal the denial, would simply get a permit from a reciprocal state (most often Florida, thus the "Floida Loophole" sobriquet - be aware that the criteria for getting a FL license is much more stringent the criteria for a PA license, something the politicians seemed to have ignored) and use that to carry in PA. As I pointed out, Phily's original version of the law targeted only PA residents, carrying in PA on a non-resident permit from another state. In the final version, the "PA resident only" part went away and the final bill applies to anyone carrying in Philly on a license from a state other than their state of residence. To summarize it succinctly: There are only two classes of weapons carriers (other than LE) that are NOT subject to arrest in Philadelphia. They are: 1) A PA resident carrying on a PA LTCF, and; 2) A non-PA-resident from a reciprocal state carrying on their state-of-residence license/permit. If you are carrying, in Philly, on a license issued by a state, of which you are not a resident, even though they may have reciprocity with PA, you are violating this new Philly "law". The legality of carrying in Philly on a non-resident permit from the states named (Colorado, Idaho, Indiana, Louisiana, Montana, North Dakota and Utah) only comes into play after an arrest and a trial. If it gets that far, the case will be thrown out based on pre-emption and the named states become moot, because that, too, is a violation of pre-emption (only the state government can enter into and recognize, reciprocal agreements). Check with your attorney, but my thoughts are that a non-resident permit from the named states is no more help to you than one from any reciprocal state - you will still have to grind through the justice system before it gets tossed for a pre-emption violation. Adios, Pizza Bob
-
Recommendations for rings & mount for AR
Kevin: I think the TPS rings are great - now that SWFA carries them they are becoming better known. I saw them on a gun being tested in the American Rifleman and had a hard time tracking them down. I like the fact that they are guaranteed concentric to .0002", which precludes the necessity for lapping. As for aluminum vs steel, since the majority of scope tubes are aluminum, I am just more comfortable with aluminum rings. I'd consider steel on a high-recoil rifle, but I have TPS aluminums on my .308 and have had no problem. For the precision, I think they are an exceptional value. As to a set-up for your AR - here is what I used and the reasoning behind it. I was not enamored of the one-piece, base & ring type mounts (like the PEPR). I wanted the flexibility of being able to choose my scope height to give me the best combination of cheek weld and minimal scope to bore axis distance. I also had to be able to clear the folded BUIS's. I went with a LaRue 5/8" Picatinny QR (dual throw levers) riser (not cheap, but great quality). I then added the appropriate height TPS aluminum rings. I was able to meet all my criteria and still have a QR scope mount so I could remove it and use the BUIS if that became necessary. I changed scopes several times on that AR - the first time I went from a 1" tube to a 1" tube, so didn't need to change the rings. There were no ring marks on the scope tube of the one removed. I recently went to a 30mm scope tube, so I had to change the rings. I would have purchased TPS again, but the expediency factor dictated otherwise and I mounted it using Burris Zee rings, with the polymer insert (again, no lapping). The scope that came off also had no ringmarks. Hope that I've given you some food for thought. Adios, Pizza Bob
-
UT and FL CCW class May 22, 2011
Cameron: IANAL either, but I did a bit more research on the text of the statute and the verbiage just prior to your actual quote is very telling, it says: (3) In the event that a court of competent jurisdiction determines, in a final Order from which no further appeal is available, that persons with licenses from states other than those set forth in subsection (2)(a) have a statutory right to carry a firearm upon the public streets or public property, then, in addition to the persons categorized in subsection (2)(a), the following persons shall not be prohibited from carrying a firearm upon the public streets or public property: (a) a person licensed to carry a firearm or to hunt by a state with firearms laws similar to the firearms laws of Pennsylvania, and which provides a reciprocal privilege for individuals licensed by Pennsylvania. For purposes of this subsection (a), only the following states are deemed to have firearms laws similar to those of Pennsylvania: Colorado, Idaho, Indiana, Louisiana, Montana, North Dakota and Utah. As I read that, the legality of carrying on a permit from your named states hinges on a "court of competent jurisdiction" finding that persons with licenses from states other than those named in (2)(a) - which would be PA residents carrying on a PA license and residents of states other than PA carrying on their states license, providing there is reciprocity with PA - have a right to carry also, but then goes right back into pre-emption territory by claiming Philadelphia only recognizes reciprocity with the named states. If this statute is reviewed by a "court of competent jurisdiction" the entire statute will be thrown out as violating pre-emption and the named states clause becomes moot. Maybe I am misinterpreting because "legalese" is not always easy to understand. I am not trying to be argumentative, but I'd hate to see someone get into a "jackpot" after thinking themselves covered, based on incorrect advice. Adios, Pizza Bob
-
What size spotting scope
Buy once, cry once. I'd go for a minimum 80mm objective lens
-
Went exploring PA this weekend while there for family gathering..
Ahhhhhhhhhhhhh, Bloomsburg, home to Hess' Bar
-
Bushmaster CAR-15 223
The flash hider would just have to be removed (easy, since it is just threaded on) and a muzzlebrake / compensator would have to be installed in its place and then pinned & welded or silver soldered. I don't want to speak for him, but I believe that PK90 (Arms & Ammo) could do the transfer and all the compliance work for you. You may want to PM him for confirmation and pricing. Adios, Pizza Bob
-
My son was threaten by a classmate to be shot in the head
Harry, That was my point. The kid that made the threat could use the same rationale - that is the type of stuff he hears at home, so he assumes that it's normal. Kids are like sponges, they absorb everything they see adults do & say.
-
My son was threaten by a classmate to be shot in the head
One other thing I took away from this thread. I'm not so sure that the comments like, "My dad would kill me" or, the eyes swollen shut, exhibit the greatest parenting skills either. When we hear about incidences, such as this threat, maybe the first place we need to look is within ourselves. Obviously this kids parents just don't care (at least from the information at hand), but it would worry me that kids whose parents are gun owners, fear physical retribution (to the degree expressed - I'm not anti-corporal punishment) for their transgressions. Adios, Pizza Bob
-
My son was threaten by a classmate to be shot in the head
Wojo: What happened to the zero tolerance policies most schools have in place? We so often see them used for ridiculous things, like pictures of guns on a T-shirt, or the like, here's a case where it might actually do some good. Did they at least suspend the kid that made the threat? And if they have had multiple problems with this kid, culminating in this death threat, I would think they could remove him from the mainstream permanently. Good luck with the outcome, you've certainly got my attention. Adios, Pizza Bob
-
Getting into the wheelies
Gunbroker, S&W Forum classifieds, my basement. The grips on njluger's 28 are contemporary to the gun, but probably were not on it when originally purchased. It would have had checkered, walnut Magna grips. The target grips more commonly have checkered panels, the smooth target grips are a premium. The target grips went through several evolutionary changes. The ones on his gun are Goncalo Alves and have the "football" cutout. Later ones were totally relieved for speedloaders with a crescent cut. Earlier ones were walnut and had a small diamond around the screw and no relief for speedloaders. The most desireable ones were the coke-bottle grips that had palm swells. Your father's gun probably has Pachmayr grips on it - a common aftermarket upgrade in the '70's from the stock Magna grips that came standard on the 28. IIRC, Pachmayr Presentation grips were made in two sizes (Lg & Sm) to accommodate different size hands. I had Pachmayrs on all my Smiths, until Hogue came along. Glenn: Not sure that I agree with you re: barrel length, but I don't think I've ever seen a breakdown. Being made primarily for police, I would have thought the 4" variety more popular, but I guess it wasn't unusual in the 60's and 70's to see 6" police guns. There were appx 100 model 28's made with the 8 3/8" barrels and some special editions in 5". Adios, Pizza Bob
-
UT and FL CCW class May 22, 2011
I stand corrected. Thank you for the clarification.
-
Yet another magazine question...
Not if it is unique to non-semi-auto firearms
-
UT and FL CCW class May 22, 2011
?????????????????????? I'm not sure I know what you mean by the above statement. The recent change in Philadelphia gun laws is that city council passed a law that says they won't recognize any non-resident permit. The original version of that law only applied to PA residents carrying on a non-resident permit from states such as FL or UT, but, as I understand it, the version that passed applies to anyone carrying on a permit from a state other than their state of residence. Now this law is not worth the paper it is written on because PA has pre-emption, and the law is technically illegal and unenforceable. However, that does not mean that they won't arrest you under that law, which may entail a large outlay of money to fight it in court. You may have to appeal it to get out of the city courts before the charge would be dismissed. To me, concealed means concealed and Philly be damned, it is legal under PA law, but people should be aware that the possibility exists. Which brings me back to my point: What makes the UT permit more valuable in Philadelphia than any other permit/license that has PA reciprocity? Philadelphia recognizes none of them. Adios, Pizza Bob
-
Getting into the wheelies
Welcome to the world of the N-Frame S&W. A disease just as bad as the "Signess". Great gun to start off your collection of wheelguns (and, yes, that is what it will become). Looks like that serial number would be early 1973, according to Supica & Nahas. Mine is slightly earlier, being N55XXX, probably the late 60's early 70's. IIRC I bought it in 1972 for $125. It was a 4" barrel (still must have the barrel around here somewhere), but I was hot-to-trot for an impossible to get (discontinued several years before) model 24. Being a fan of gun writer Skeeter Skelton, when he started writing about converting model 28's to .44 Special, I knew I had to follow that path. J&G had original 6.5" model 24 barrels, so that part of the equation was solved. I got on MMC's (Miniature Machine Company) list for conversions, but they were a year out. Guns magazine also did an article about that conversion and named George Matthews of Downey, CA as a gunsmith that could do it. Sent mine off and here it is 39 years later... I hope that you enjoy your model 28 half as much as I enjoy mine. I am now up to six N-frames - just like potato chips and Sigs. Adios, Pizza Bob
-
Osama's last update
How about this one...