Everything posted by Pizza Bob
-
Birthday for 4 today
Happy Birthday Guys!
-
Springfield 1911 Magazines from the Coupon When you buy a gun??
Sorry, did not no that - guess Joe's (and yours) googlefu is stronger than mine.
-
IDPA @ SCFGPA 4/17 @ 11AM
After a more comprehensive read through the rules this morning, and watching that video, I now realize something that I did that was fundamentally wrong - and accounted, at least in part, for my slow times (the other part being that I'm fat and old). Every reload that I did yesterday was either a RWR or tactical. I don't think I shot to slide lock once during the whole match (with the exception of the malfunction drill my stupidity put through on stage 2, but that's another story). I kept watching everybody else shoot to slide lock and figured they were "gamimg it" because I thought one of the rationales of IDPA were tactical reloads. This morning as I'm reading through the rules I come across the statement (paraphrase) that the preferred reload is to shoot the gun empty (to slide lock) since that is what happens most often in real life situations. Doh! OK, live and learn (never too old). I had a lot of fun and this was a great shoot. Good to meet new faces and see ones we already knew. I'll be back next month and this time I'll be shooting to slide lock...sheeesh. Adios, Pizza Bob<------such a deal, guns AND pizza, it doesn't get any better than that.
-
Cheapest s&w revolvers
From your description, that is a PPC, which is what I wrote about in the above post. If it's still there, you may be able to haggle quite a bit. As I said, these are orphans, but make fun range guns.
-
Springfield 1911 Magazines from the Coupon When you buy a gun??
What the heck are you looking at???? Try looking here... http://shopwilsoncombat.com/45-ACP/departments/363/ You can buy from numerous sources, but to see what is available, always best to go to the manufacturer's site - or buy from here. Adios, Pizza Bob
-
Springfield 1911 Magazines from the Coupon When you buy a gun??
Magazines, especially with a 1911, is one place where you don't want to scrimp. Wilsons are highly thought of and that is what I use in both my Combat Elite and Sig RCS. Never had a malfunction caused by a mag - brain farts, yes, magazines, no. JMHO Adios, Pizza Bob
-
Cheapest s&w revolvers
If you are patient and look around, you may find something like that at a decent price. I have come across several PPC revolvers in my rounds of the fun stores. My buddy picked-up a Power Custom (which was a big deal among PPC shooters) for a song. PPC is now a semi-auto game more than a revolver, so these are kind of orphans. Some gun shops that get them think they are a bg deal and price them way too high. They were a very specialized weapon, for a very specialized game, that is now played with new toys. If a gun shop realizes this and prices it accordingly, you have your bargain. But caveat emptor - these are usually shot tons, so check for timing and lock-up and cylinder end play. They were usually used with low-powered cast-lead bullets, so there is little chance of the barrel being shot out. Have fun looking - pursuit is half the game. Adios, Pizza Bob
-
Castle Doctrine approved in PA.
IIRC, it made it through both branches of the legislature last year. Fast Eddie (Gov at the time) refused to sign it and they either didn't have enough time or votes to override his veto. No game in town with Corbett at the helm. Adios, Pizza Bob
-
Why you do not shoot Lead in a Glock
OK, this is my last post on this topic (I can hear the applause from here). I like to think of myself as being open minded and can be swayed by logical opposition. I have just spent the last hour and a half all over the Internet researching moly (MoS2) coated lead bullets. The conclusion that I reached is that, as far as I'm concerned, moly coated bullets couls $.05 cheaper than lead cast and I still wouldn't use them. Too much diversity with how the coating is applied, what grade of MoS2 is used. What the effects are on the gun - what the long term effects are. For every positive story there were three negatives, but it was the technical articles that held more sway over my opinion. Interesting that these were suggested as a way to reduce leading - a lot of what I read indicated that MoS2 fouling is harder to remove than lead. Also, that the whole barrel has to be coated with moly (30-40 shots according to Midway) until accuracy starts to come back. A lot of stories indicated that if your barrel is not 100% clean and shiny before the initial use of moly coated bullets, the leading will actually be worse. Also, the use of moly-coated bullets will actually decrease velocity for a given load - something that competitive shooters trying to make major should be aware of - you may actually have to increase the amount of powder to unsafe levels in order to achieve the same velocity as plain lead bullets. Or how about the chemical changes that take place with MoS2 and extreme heat (as would be found with cartridge ignition) it can actually create H2SO4 - that's sulfuric acid for those of you that are chemically challenged. Yes, lead bullets or balls have been with us for centuries, because they work. Too many unknowns, too many different production methods, too many varied opinions on moly-coated bullets for my guns to ever see them. I'll stick with what is known and what works. That's the beauty of a free society - we have a choice, I've made mine and you've made yours, as long as we're both happy with those choices, our discourse is at an end. Good luck. Adios, Pizza Bob
-
Castle Doctrine approved in PA.
Aside from the ongoing debate about the interpretation of NJ's law (always open to question), it should be pointed out (in keeping with the original topic) that the PA bill was approved in the PA house. It still needs to go to the PA Senate and be signed (which I believe Corbett has indicated he will do). Adios, Pizza Bob
-
Any gunshops in PA just over DWG on 80?
I'd point out the "at least three years" part of the agreement, plus the spot checks. Hard to support a store that caves to pressure that resulted from an illegal operation. I understand that the stores were between a rock and a hard place, and they had to do what they thought was right - well so do I, and I vote with my wallet. Adios, Pizza Bob
-
Any gunshops in PA just over DWG on 80?
Richie Flynn at American Sport Shooters is a great guy and it's a terrific store - you will enjoy going there. Weavers....well.......Phil is a nutjob from Brooklyn who will tell you how everybody is out to get him and what a POS other gunshop owners in the area are - especially Richie. I don't recommend Weavers, but it DOES have to be experienced to be believed. At least he has two nice dogs. Enjoy. Adios, Pizza Bob<---PA gunshop guru
-
Any gunshops in PA just over DWG on 80?
Dunk's usually have a nice selection of new & used firearms. However, be aware that they are one of the gun stores that caved-in to Bloomberg's heinous demands based on his illegal "sting" operation. As such, all firearms transactions are recorded and forwarded to Bloomberg's minions. Adios, Pizza Bob
- NJGF T-Shirts
-
Why you do not shoot Lead in a Glock
You are correct, leading is a PITA to clean out of a barrel - but the impression that you give is that: Use of lead bullets always = leading. That is just not the case. How much leading (if any) you get is dependent on the alloy used to cast the bullets, the lube used, and the velocity at which it is driven. Lead bullets are eaiser on barrels (less wear), generally more accurate at handgun ranges (better obturation) and cheaper than you state (savings > $.01 per bullet). I have a .44 Special that has been fed nothing but 250 gr LSWC or Keith style lead bullets over 7.5 grs of Unique (about 850 - 900 fps) - literally thousands of them down the pipe, and I have never had to do anything special when cleaning it, because there is no leading - a little Hoppe's #9 and we were always good to go. I also had a Gold Cup that I shot IPSC with - it was loaded with 200 gr H&G 68 cast bullets loaded to exceed major power factor. Our club held a practice night every week and we were affiliated with three other clubs, so there was a match every weekend. Between the practices and the matches that gun saw 800 to 1000 rounds a month for the year and half that I shot it. I would shoot it until the slide wouldn't lock back when empty - which was usually at 1500 - 2000 rounds. The bulk of the grime, gumming up the works, was bullet lube and powder residue - easily cleaned. Never did anything special for leading with that gun either. If you are going to shoot cast bullets and try to drive them at magnum velocities, yes, you will probably experience leading. If you are looking for an inexpensive method to increase the number of rounds per dollar spent, it is hard to beat cast bullets. Of the four matches per month we shot, two were indoors and two were out. All practice sessions were indoors. Even with the ventilation systems of 20+ years ago, lead was never a problem. I had the lead level in my blood monitored the whole time I was shooting and while it was slightly above normal, it never posed a threat, nor did it increase beyond a certain point. Better ventilation systems today mean even less risk. It's not like jacketed bullets weren't available to us. When I said that is all there was I was speaking of the 1800's. IPSC in the mid-80's was predominately a game for .45 ACP's and everybody shot cast bullets (unless they were good enough to get a bullet sponsor). It wasn't until the whole "try to make major with a minor caliber" philosophy entered the game that there was a need for jacketed bullets. I also belong to the large, slow moving bullet school of thought with calibers that begin with "4" dominating my meager collection. Cast bullets are more suitable for these calibers than for the "small bullet, driven quickly" school. Lead is a great alternative for those that want to shoot more for less. It's as simple as that. Knowing the alloy or hardness, loading to suitable velocities and shooting with good ventilation precludes any problems. But if you want to pay more and shoot less, that's fine with me, you do what you think is best. Adios, Pizza Bob
-
Cheapest s&w revolvers
I have to disagree with some of these assessments. I don't think that you are going to find a bargain on a model 14 or 15, or even a model 10, if it's a model 10HB. A lot of the "bargains" to be had are police or security agency trade-ins (yes, some still carry revolvers) and have been shot a lot. If pictures are all you have to go on, check the "turn ring" and see how heavy it is. Also, if it's blued, check the ejector rod for finish wear - another indicator it has been shot a lot. Model 64's (and other SS guns) are harder to spot wear, since they have no finish. 64's will bring somewhat of a premium since from 1973 on, they were all HB's (introduced in 1970 with a tapered barrel). As for J-frames - S&W just reduced the price on the internal hammer J-frames to where you can buy them new for about $350 - $360. Any used ones, from private owners were probably purchased for $400 - $450 so they most likely won't be giving them away. All this being said, you may stumble across a bargain every now and then, but remember, if it's too good to be true, it probably isn't. Good hunting. Adios, Pizza Bob
-
Fort Dix AR explosion!
And thus it begins....
-
9 mm or .40 cal - - Why Get One Over The Other?
Gotta disagree with you there and you don't ever want that statement to follow you to court when you're the defendent. You shoot to neutralize a threat. Once there is no more threat, there should be no more shooting. Yes, you shoot CoM and yes, that may result in the death of the perpetrator, but the only thing a jury - or anyone else - should ever hear is that you shot to neutralize the threat. Adios, Pizza Bob
-
9 mm or .40 cal - - Why Get One Over The Other?
Remember it?!? I AM the Blob from the 1950's
-
Fort Dix AR explosion!
Glad to see somebody else on this forum use "whippersnappers" - we're watching you youngsters.
-
9 mm or .40 cal - - Why Get One Over The Other?
This is all great to know if I am ever attacked by ballistic gelatin
-
IDPA @ SCFGPA 4/17 @ 11AM
Thanks guys
-
IDPA @ SCFGPA 4/17 @ 11AM
Finally went on the website (sorry, should've done that in the first place) and it says that you have to attend a Wednesday night practice to participate. True? If so, guess I'm out. If the safety inspection is repeated before the match, and that qualifies you to shoot in the match, what time does one need to be there? The calendar says the match starts at 10 AM, but the OP says 11 AM. Is the 10 AM start time for the safety inspection? Sorry guys, just don't want to show-up and not be able to shoot. Adios, Pizza Bob
-
Happy Birthday Keith (Njpilot) and Stuntman
Yo, Happy Birthday!
-
guns and cases
Ray: An answer like that demands that you give-up your man card. Adios, Pizza Bob