Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. And so it begins First it's the trigger, then it'll be a good bench rest and set of bags. Then better glass. Then you start with the ammo - already been the TAP route, next comes Federal GMM, then comes handloads. With the handloads comes outside neck turning. Primer hole uniforming. Weighing brass and individual bullets. Naturally, all benchrest components, including custom bullets. Ah yes, it's a slippery slope from here. I'd recommend the Sinclair catalog if I were an enabler. Good luck. Adios, Pizza Bob<----Been there, done that
  2. Sounds like you have the beginnings of "one-hole disease". Glad to see you are using 5-shot groups as a measure of your, and your rifle's, ability to shoot. I can't stand when a gun rag talks about terrific groups and you read the article only to find they were 3-shot groups. Any thing under 1 MOA is decent and it sounds like you were there and then some. Remember, groups are measured CTC, so take the widest outside to outside dimension and subtract the bullet diameter to get group size. Enjoy. Adios, Pizza Bob
  3. Pizza Bob replied to henrym's topic in Handguns
    Curious as to why you seem to want a J-Frame? If it is an intended carry gun, then you are right-on. If you are looking for a range / HD gun, then there are better S&W choices in larger-framed guns. I'd take a serious look at the L-Framed offerings, but you also may want to consider the K & N framed guns. If you are set on a J-Frame .357, and you don't intend to pocket or ankle carry, then at least get an all-steel gun. You will find that J-Frame .357's kind of take the enjoyment out of a range session - and airweights are even worse. Great carry guns but not fun. JMHO / YMMV Adios, Pizza Bob
  4. You have to remember that a safe is not the be all and end all of security. Given enough time and the right tools, any safe can be breached. What these safes do is slow down the burglar, hopefully to the point of discouragement, where they look for easier game. I have a small Stack-On safe in addition to a larger Fort Knox, they are both adequate for the intended purpose - as is the one you link to. I might suggest that you look on Amazon. That's where I got mine. In addition to the best price I could find anywhere, it was free delivery - which I note the one from Dick's is not. Any safe is better than no safe - I learned the hard way and it cost me six firearms and other trinkets. So, as the Nike ad says: Just do it! Adios, Pizza Bob
  5. Abolutely agree she should not have gone outside or even opened the door - that's how home invasions occur. Should have asked through the door who it was and what they wanted. When they asked and she didn't know and told them that, it should have ended right there. If I'm not expecting someone and the doorbell rings, first I arm myself, then I look out to see who it is and if I don't know them they get the third degree through the door. I don't think this is being overly paranoid, just cautious. If someone makes a good enough case for me to open the door, I still have a gun in my hand behind my back. You can't be too careful these days - you may not get a chance for a "do-over". JMHO Adios, Pizza Bob
  6. You can kiss my dog at midnight... Thought I'd go with a legitimate response - otherwise it was just too easy. Adios, Pizza Bob
  7. Sorry, duplicate post. Nevermind
  8. Bryan & Mrs Bryan....You are aware that you have a potential guest list of over 2400 people (counting SO's)? Here's to a fast recuperation. Adios, Pizza Bob
  9. Yes. And I think we have pretty well established that there is no need to unload your mags. Just separate them from the gun. Separate containers, also means separate compartments of a single range bag - just FYI.
  10. I agree with Tim, but let me play Devil's Advocate... Does the law or administrative code define "Constructive Possession"? You have a loaded magazine in your trunk. You have the firearm for which the magazine is intended, also in your trunk - separate from the magazine. Even though they are in separate containers, are you not in constructive possession of a loaded firearm in a vehicle? Discuss. Adios, Pizza Bob
  11. My point was that it is NOT law. Transporting loaded mags is OK - unless you can find a cite that says it's not.
  12. I don't think you'll find anything about transporting loaded mags.
  13. There is NO Florida loophole. It is an invention of the libtard politicians and the toady press. Even by their skewed definition (in the Lentz bill) it would not affect NJ residents carrying on a FL permit, only PA residents. You had but to only see one of Lentz's pre-election campaign ads to realize how far they were willing to try and stretch credibility. They categoreically stated that a criminal, denied a PA LTCF, could get one through the mail from Florida. The factors that are codified into PA law, that would prevent the issuance of a LTCF are the same that are in the FL law. The "criminals" of which he speaks are those people denied in Philadelphia for such heinous crimes as late child support or having your guns stolen (yeah, let's kick the victim while they're down). Shall issue laws, spell out, in no uncertain terms, what precludes issuance - and it ain't traffic tickets or being a victim. It is actually harder to obtain a FL license than a PA LTCF. Florida requires a training component in order to show competency with a firearm - PA does not. A FL license costs appx $117 vs. PA at $25. Please stop furthering the myth of the "Florida Loophole", there is no such thing. Adios, Pizza Bob
  14. Heck, I thought he was talking Weatherby
  15. Depends on what you're looking for and how much you want to spend. Tactical tupperware, there's Glock, SA XD, S&W M&P, FN. Single action - a myriad of 1911 platforms Metal in a DA/SA look at CZ or Sig. You just happened on one of the less desireable choices. There's tons of reliable .45's out there. I advise that you handle and shoot as many varieties as you can before deciding. Adios, Pizza Bob
  16. It's FPID - Firearm Purchasers Identification. Often mistakenly called FOID, for Firearm Owners Identification. Since it is not required for ownership, it is strictly a purchaser ID. In Illinois, it is a FOID.
  17. Check out PAFOA, the forum there has stickies about all aspects of carry in PA. There are few restrictions in PA. No ammo or mag restrictions. Schools and federal facilities are a no-no, including the Post Office. There are no separate laws with regard to Philly and concealed carry (even though they'd like there to be - fortunately PA has pre-emption). You can open carry in PA with no permit - but cannot open carry in Philly without one (in PA it is a LTCF) - that's codified in state law. If you are open carrying w/o a permit, you cannot do so in a motor vehicle. Since you will have a permit (FL) you can open or conceal carry anywhere that isn't restricted. as mentioned previously. Not wise to do so in Philly, even though it's legal. Sometimes the Philly PD makes up the law as they go along. There are people pushing the envelope now, but they know what they're getting into. Since both open & concealed carry are OK in PA you don't have to worry if you print. There is no such thing as brandishing in PA. "No gun" signs do not carry the weight of law (again except for those places already mentioned) - but if you are found to be carrying and ask to leave, and you don't comply, you can be arrested for trespass. Those are the highpoints. PA is pretty wide open, compared to most states that have CC. Be safe. Adios, Pizza Bob
  18. That;s an ALL METAL compact .45 to you, sir...
  19. If it's a S&W, you'll find it easier if you remove the cylinder. Just open the cylinder, back out the lower, forward sideplate screw on the R/S and pull the crane straight out toward the muzzle. Much easier to hold to clean the chambers and face and around the extractor star. Without fear of "springing the crane". Old School, you can keep your tactical tupperware, there's nothing finer than a S&W wheel gun....'nuff said! HTH Adios, Pizza Bob
  20. Temperature can affect ammo performance. Generally, for each degree above the temperature that the ammo was loaded for, you can experience an increase in velocity of 1.7 fps. So if the ammo is loaded for an average temperature of 72 degrees and it is left in the sunlight to the point where, internally, it reaches 130 degrees (quite realistic) , that is a nominal increase in velocity of 99 fps. Of course the velocity increase is a result of increased pressure. SAAMI specs allow for these kind of temperature variances, so not much channce of a KB - but if you handload (especially using old load data) the chances would be greatly increased. To really complicate matters, with some powders, the reverse is true - pressure spikes as the temperature drops. More common though is the higher temperature / higher pressure scenario described above. Paul, I did find reference to military ammunition being loaded based on the theater of operations. The reference was WWII and it was Norma ammunition loaded for use in the arctic climates of Scandanavia. I don't know if ammo bound for the sandbox is loaded specifically for those temperature extremes and doubtful that would be disclosed. I do agree with Paul in that humidity is probably the larger factor in ammunition performance, when it is stored in an uncontrolled environment. Adios, Pizza Bob
  21. I shot one of these (P7 PSP) for the first time this past Thursday. I was really impressed. Very accurate, very easy to shoot. The Euro mag release on these is no impediment as it works a little differently than others I've seen/used. Instead of having to force the magazine past it, on insertion, and pulling it toward the rear to extract the mag (think Ruger MK pistols), you push it toward the front to release - counterintuitive, I know, but it offers little resistance on insertion and your not fighting to get the mag past it and your (in my case) fat fingers on extraction. For $500 I think these are a steal and especially to get them from a reputable place like TGS - great to deal with. Adios, Pizza Bob
  22. THIS JUST IN......Philadelphia Armory Show cancelled, once again. No reason given. That leaves Sellersville and Oaks. I'm Jonesin' for a gun show, but not sure which I'll do. Adios, Pizza Bob

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.