Everything posted by Pizza Bob
-
Suspect ruptured bursa (bursitis) on proximal side of thumb: How to find a doctor?
I feel your pain....literally Not bursitis, hyper-extension of the thumb caused the ligament to break the bone at the base of the first joint. Had surgery last Monday (6/18) - prognosis is good, but I don't know when I'll get back to shooting. I would recommend my doctor to you, but it is a bit far for you. He is with TOG (Trenton Orthopedics Group) which is part of the Rothman Institute. Just to allay your fears, he knows that I shoot - my original visit to him was because of a shooting related pain and it seems to matter not. His name is Aita (he is their hand and wrist specialist), but I'm sure that you will be able to find someone locally. I will probably start PT in about two weeks. Good luck. Adios, Pizza Bob
-
Blade Tech signature Holster
Buy once, cry once. Blade Tech makes fine products. I think the "Signature" line replaces the "Revolution" line and, like that line, is an injection molded polymer. Spring for the extra bucks and get the Classic, which is a thermo-molded polymer (Kydek). Save money by not getting the DOH attachment - unless you have hips like a woman. As for the belt attachment method - if this is going on the belt that holds up your pants, get the ASR as it allows you to "bridge" belt keepers for optimum holster position. If this is going on an over/under comp belt system (not allowed for IDPA) get the Tek-Lok attachment. Adios, Pizza Bob
-
Daily humor thread
- New Shooterlooking for training, where too?
Did you guys check out this thread? Adios, Pizza Bob- Glock match in Jackson
Not to take away from this thread, but for those of you that find you really enjoy yourself at this type of event, I'd suggest you check out IDPA or USPSA or both. If the bug bites you really badly you can shoot a match every weekend with only minor travel (<90 minutes). Just thought I'd throw this out there for your consideration. Adios, Pizza Bob- 9mm pistol vs 357 revolver
I gotta slightly disagree with you there GRIZ - you aren't taking into account the B/C gap which accounts for the perception and reality of revolvers being louder. OP - the difference in noise is negligible - in fact it's a non-factor as you should be wearing adequate hearing protection anytime you shoot. Don't base your decision on noise. Adios, Pizza Bob- 9mm pistol vs 357 revolver
Fish nut - That's called auditory exclusion- Gotta Love an Auction
Yes, that's it. They have auctions weekly, but gun auctions happen whenever they have enough to make it interesting. This was made up from three estates and it has been probably three or four months since the last one. On June 23, they are auctioning BDR Cobra that was owned by one of the estates from the gun auction. Gorgeous car, silver with a red stripe and interior and an aluminum 427. Adios, Pizza Bob You've got that 100% correct.- 9mm pistol vs 357 revolver
From the context of his posts, I'm going to assume that the OP is new to guns and shooting. NJGF had some of the best answers/advice, but I'll add that everybody should own at least one revolver (some of us own a few more than that). Adios, Pizza Bob- Gotta Love an Auction
I went to a gun auction yesterday at Brown Bothers Auction House in Buckingham, PA. This was my second one there and the second time I came away happy - yesterday was more ecstatic, rather than happy. My father bought a Winchester Model 71 in 1956 from a PA state trooper. I always loved that gun and in the late 80's when Browning reissued 71's made by Miroku in Japan, I headed right to my LGS and put my name on the wait list. Money was tight then, but I knew I'd find a way. My folks were visiting for Thanksgiving that year and I told my dad what I'd done. He showed little reaction, but he was never a very demonstrative type guy. Imagine my surprise when at Christmas time, he presented me with his model 71, saying that now I wouldn't have to spend all that money. Probably one of the fondest memories I have of my dad. I should interject here that his 71 wasn't just any old 71, this was a Model 71 Deluxe with a three-digit serial number. I know that there is at least one person on the forum that also has a 71, but for the uninformed, the 71 is the finest lever-action rifle ever made. It was derived from the Model 1886 and was meant to be a gun that was capable of taking any North American game. It was chambered in a new cartridge, the .348 Winchester the mission of which was to replace numerous other cartridges used in Winchester's lever guns back into the black powder era, and to have ballistics comparable to the .30-06. It was/is the only production gun ever chambered in .348. So I was overjoyed to find a Model 71 in the auction listings. This was one of the Miroku 71's but it wasn't until I looked at the picture with the listing that I realized this was a Model 71 High Grade and it was ANIB. These had a silver engraved receiver with some gold inlay and used AAA walnut for the stock. Given the rest of the goods up for auction (a lot of milsurp - but a smattering of everything) I hoped that the crowd would not be the type to go for the embellished Winchester, and that I could "steal it". Though being an auction, it only takes one person that wants it as bad as you to derail your plans. I set a limit for myself and the bidding started. One other guy. We went back & forth in $50 increments. We got to my limit, but I sensed he was slowing (must have been his limit too), so pushed on. I went to $100 over my limit and he raised it by $50 at which time I bowed out. The auctioneer cajoled me, saying how much I'd regret it if I didn't bid one more time - and he was right. I bit the bullet (figuratively, of course) and bid one last time - $200 over my limit. But my opponent stayed silent and I won the gun. I didn't "steal" it but I did get it for $300 to $600 under market, so I was happy. There were some deals to be had there - a 6" Python from 1976 went for $2K. Another gun, on which I had intended to bid, but didn't after I went over limit, went for a bargain $375 - it was an NRA Centennial Winchester Model 94 Musket (I have the rifle). I also bid on a Model 12-2 S&W, 2" barrel round butt (impossible to find), but dropped out when it went too high. At any rate, here are some pics... Butt stock... Original 71 Deluxe and the "new" 71 High Grade (they are the same size - it's just the perspective)... Thanks for reading. Adios, Pizza Bob- Mini clays, who got dem?
Not a shotgunner - I've only shot trap once - never skeet, but the search for "mini-clays" jogged my memory. Probably for the older members here, but does anyone (other than me) remember Mo-Skeet? I think officially it was Mo-Skeet-O, but we always just called it Mo-Skeet. Small clay pigeons (maybe 3" - 3.5" in diameter and you shot them with a pump-action .22 LR loaded with shot shells. IIRC, Winchester even made a smooth-bore .22 just for this purpose. I think I encountered it at Boy Scouts (and yes that's what accounts for my stellar character today). Adios, Pizza Bob- Travel to the Dark Side
Yesterday I visited the dark side….briefly. I’m a tried and true revolver guy. I have competed in (IDPA, USPSA & ICORE) with nothing but wheelguns for the last four or so years. Several weeks ago I came across a really good deal on a bottom feeder, a 9 mm Sig P226 Elite RX SAO. Allow me to interpret: The Elite has special features over the standard P226, to wit – a beavertail, an undercut trigger guard, checkering on the front strap, Sig Lite night sights and G10 grip panels. The RX means that the gun is factory equipped with a red dot optic – in this case, Sig’s Romeo 1 with a 3 MOA dot. And, of course, the SAO means single action only. So I pounced on it. The same person that found this deal pointed me to another great deal on Sig walnut grips for the gun at about 67% off MSRP or about 60% off the “street” price – so I grabbed them too. I had to wait until Friday, 5/18 to pick this beauty up due to a previous purchase (thanks OGAM, and yes, that one was a revolver). My intention was to shoot an IDPA match with the new Sig on Sunday 5/20. I was going to use Saturday to practice drawing – remembering to disengage the safety – and acquiring the red dot. Wasn’t able to do any live fire or sighting in. The dot appeared to co-witness the irons, so I figured “close enough for government work." Well, as it often happens, life got in the way and I didn’t get a chance to even touch the gun on Saturday, but that didn’t deter me, off I went to the match on Sunday with a totally unsighted, untested gun. Sometimes I’m a glutton for punishment. For those of you that are knowledgeable about red dots on hand guns, I’m sure you know what happened next – that is after I forgot to disengage the safety – I couldn’t find the red dot. Took me a while to track it down, and it started all over again after each shot. It did improve, slightly, as the day wore on but I know that I could have shot all the stages more quickly with my revolver. In short: It was a disaster and I finished DFL. I didn’t expect to be competent right off the bat, but I did expect to acclimate to it somewhat. While there was minimal improvement from the start to the finish, my performance was still laughable at the end. To the guns credit, it ran 100% absolutely flawlessly, and when I did actually manage to find the red dot and break the shot as it passed over the down-zero scoring area, it also put the bullets where they were aimed. This is going to require further study – much further study. The gun is great and shooting static targets from a static position I’m sure that I could shine – but in practical shooting where you may be moving, the target may be moving, or both, I don’t know if I’ll ever be able to be even slightly competitive without tons of practice. I have new found respect for those shooting the new Carry Optics divisions in both IDPA and USPSA. Next match it will be back to the bright side and this… Adios, Pizza Bob- Rifle Hunting Limitations in NJ
Iron sights are fine for PA. Also, PA used to have a temporary out of state license. As I said, it has been many years since I hunted in PA, but you used to be able to get a license that was good for 5 days (IIRC) for varmints and small game. It was at a reasonable rate. The annual out of state license - which you would need for deer and bear is more expensive. Again, this is all old info and you need to go to the PGC site to validate it. Adios, Pizza Bob- Rifle Hunting Limitations in NJ
I haven't hunted in PA for years, but IIRC, the southeast corner of the state is a shotgun only zone. You have to hunt outside that zone in order to use a centerfire rifle. Not sure how that impacts your desire to hunt with a rifle as far as distance necessary to travel to do so. Things may have changed - I'd check the PGC website. Adios, Pizza Bob- NJ Gun CZAR Appointed
If that's what you are being charged for those tasks, I have a bridge for sale in Brooklyn I'd like to show you.- Advice for Senior
Both Speer and Hornady are making SD rounds in .22 WMR..... https://www.speer-ammo.com/en/ammunition/gold-dot-short-barrel-personal-protection-rimfire/22-wmr/22-wmr-40-gold-dot-short-barrel-ammo or https://www.hornady.com/ammunition/rimfire/22-wmr-45-gr-ftx-critical-defense#!/ Plus this... https://www.smith-wesson.com/firearms/model-48 And you're all set. Adios, Pizza Bob- Advice for Senior
RE: Revolvers - I should add that it is not only the weight of the trigger pull, but also the length. The sights must be held in alignment through the entire, long, trigger pull if you hope to hit anything.- Advice for Senior
Not sure why everyone pushes seniors and others with poor hand strength toward revolvers - especially small revolvers. Factory double-action trigger pull is in the neighborhood of 10 - 12 pounds - not easy for someone with poor hand strength. Shooting it single-action is inviting an A/D - especially in stressful situations. If you can manage the double action revolver trigger, get a gun with a 4" barrel - preferably a K or L frame S&W in .38 / .357 and stoke it with .38 Special ammo. In either case (revolver or semi-auto) look for something with some mass - in a SD situation it may take more than one shot which means that you will have to deal with the recoil impulse - mass is your friend in this instance. Go to a range where they rent firearms and try any that you think may fit the bill. Good luck in your quest. Adios, Pizza Bob- Another Monmouth County Shooter
That's a bit ambitious for a new shooter, don't you think?- Another Monmouth County Shooter
Welcome to the forum. All right, I give up, what's a Colt Model 29? Adios, Pizza Bob- New model 19!
It's there, yours was very well pressed in and polished before bluing. It's on all S&W revolvers. It's the hammer stud and it is pressed into the frame. Here's an old pre Model 10 (an M&P) - rather prominent on this one with the age and finish loss... And here's a newer one, with the IL a Model 357, with a Scandium frame and a stainless pin - which makes it very easy to see... It varies from gun to gun dependent on quality of polishing before finishing. Adios, Pizza Bob- New model 19!
Not to say that it doesn't happen but I've only ever read about it - I've never seen it. My understanding is that the accidentally engaging failure is more likely to occur on lightweight, high recoil guns. Think 329 PD (<30 oz .44 Magnum or the 11 oz J-frames). If it really worries you, remove the locking pieces - takes about 15 minutes. If you object on aesthetic grounds, you can purchase a plug to fill the hole - and before someone objects to that on aesthetic grounds, I suggest you look at your pre-lock Smiths and you'll see that there was a frame plug there on the old guns anyway. Buy it, shoot it, enjoy it. Adios, Pizza Bob @Old School: $650 to $800- Passport needed to apply for permits?
If they want to make that a requirement then the superintendent needs to make that part of the STS-033. Then and only then will that fall within the statute.- Chiappa Rhino?
One of the designers of the Mateba, Emilio Ghisoni, also designed the Rhino- Mushy Brakes
Check the rubber brake hoses at each wheel and make sure that you don't have an aneurysm. Check while someone is pumping the pedal. If you find a hose that needs to be replaced, replace all four hoses and I'd recommend using braided stainless lines. You also may want to consider taking it someplace where they can power-bleed the brakes. Adios, Pizza Bob - New Shooterlooking for training, where too?