Everything posted by Pizza Bob
-
Obtaining a FPID Card
Contacting an attorney is the only correct answer to your query. Any advice you receive on here is worth exactly what you paid for it. Good luck. Adios, Pizza Bob
-
Pinned and welded?
Just to clarify - In the case of barrels <16", I don't believe that the device (brake) itself has to be welded directly to the barrel - but the pin(s) must be welded or silver-soldered over. If I'm spreading misinformation, somebody please cut and paste the exact ruling from the BATFE. Adios, Pizza Bob
-
Help me decide
Full size, metal frame, 4.4" barrel (let's not be too picky), 9mm, 15 round capacity, includes the red dot - all for less than the price of an STI 2011. https://www.sigsauer.com/store/p226-rx-full-size.html Adios, Pizza Bob
-
2 Permits and too many decisions
You already seem to know the drawbacks of the .380, so why not get a sub-compact Kahr in 9mm. I have an MK 9 and it is really a terrific gun. As for revolvers - well we all know what brand I'm going to recommend, but as far as what model - 686 (standard model) or 686 SSR or as Jim B1 said, a new model 66 (that would be a 66-8). I have no use for a 7-shot revolver, so stick with a 4" / 6-shot or go whole hog and get an 8-shot 627 variation: https://www.smith-wesson.com/firearms/performance-center-pro-series-model-627 Good luck with whatever you choose. Adios, Pizza Bob
-
NJ2AS's Alexander Roubian reaching out to Legislators!
Nissan Maxima?
-
NJ2AS's Alexander Roubian reaching out to Legislators!
Something is amiss here. A friend sent me a link to this video yesterday. When I clicked on the link the video came up and I watched it - then I looked at the comments. Some of those comments dated back 5 years. I looked at the published date of the video and it said Oct. 17, 2011. Now I click on the link here and it takes me to the same video, but it is dated Dec 18, 2017. Go back to my friends e-mail and click on the link there again and now it takes me to the same place as the link in this thread. What gives? Is he currently talking to legislators or did he do that 5 years ago and is posting it up again to make it look like NJ2AS is more active than it really is? Or is this just an Internet hiccup? Can anybody confirm that the video is current and not just recycled? Was anyone else present when he made these calls to our legislators? I'm not sure that NJ2AS isn't a divisive factor (Doesn't play well with others) at a time when all the NJ 2A organizations should be pulling together. I give them kudos for what they have accomplished - but think how much more could be done if they worked collectively. JMHO - Flame on. Adios, Pizza Bob
-
Daily humor thread
- Jewelry Store Recommendation
Orion Jewelers in Pennington. Artist owned, many original pieces. Adios, Pizza Bob- PSA ammo notice for Cali residents
Illegal to use NICS for anything but firearms. They are going to have to build their own database. Adios, Pizza Bob- Christ Our Light - anti-2A Catholic parish in Cherry Hill
- Ejuice discussion and exchange
We interrupt this thread to bring you an important PSA... http://www.lung.org/about-us/blog/2016/07/popcorn-lung-risk-ecigs.html?referrer=https://www.google.com/ Just make sure that whatever you're inhaling does not contain this. That is all. Adios, Pizza Bob- next wheel gun
I've already said: .45 ACP- Active shooter response training at Gloucester Township church
While this laudable, I find it laughable that the LEO giving this seminar had the hutzpah to stand before this crowd and say the following, “The only person that’s going to save your life is you.” Easily said, but a little difficult to execute given that the state has co-opted our right to self-defense. What are we supposed to do? Throw hymnals at them and pray? Those are the only options that I see. Here's the article: http://www.fox29.com/news/active-shooter-response-training-at-gloucester-township-church Adios, Pizza Bob- Goldsmith recommendation
I don't know what you consider "reasonable" or where you are located, but you may want to contact Robin here... http://www.orionjewelrystudio.com/ Adios, Pizza Bob- S&W M460 XVR
Sure. The reason for the different designation is the possibility of lead build-up in the ports of the compensator when used with lead bullets. The other barrel extension isn't a compensator, just a muzzle cap. I believe that you should be able to use plated or coated bullets with the comp - maybe even cast lead if they are hard cast. The problem would most likely arise with swaged, pure lead bullets, as would be found in .45 Colt cowboy loads. Adios, Pizza Bob- 357 Sig, can it come back?
Not that I'm supporting it, but the .45 GAP was developed so that the front to back dimension of the grip was shorter, thus accommodating smaller hands. And you left out a state, our neighbor PA, although I think they have since dropped it. Adios, Pizza Bob- 357 Sig, can it come back?
Aside from the Blocks - Sig 239, 229,226, 1911, S&W M&P Steyr M357 A1,I'm sure there are many I've missed. @JimB1 - It's not just the measuring and stretching, but the fact that since they aren't straight-walled pistol cases, carbide dies cannot be used, meaning the cases must be lubed - PITA, even with One Shot. Adios, Pizza Bob- 357 Sig, can it come back?
357 Sig, can it come back? Where did it go? Should I go down and look in my safe to make sure it's still there. These threads kind of remind me of the Mark Twain quote, "The reports of my death are greatly exaggerated.” Great caliber - PITA to reload, but a terrific SD round. Adios, Pizza Bob- impressive
Yes I do and I love it. Actually the SS is rarer than the G8. There were actually fewer SS's made, total - over the four years they were produced - than the production of G8's for just the 2008 model year (appx 12K 2008 G8's vs, 11K 2014,15,16,17 SS's) and I'm not sure of the 2009 G8 production numbers. I had a 2009 G8 GT that I traded for my 2017 SS. The G8 GT was only available with an automatic, you had to go for the G8 GXP to get a manual. My SS is a manual 6-speed (Tremec 6060) and I love this car. While the G8 was available in three trim levels (G8 base V6 & G8 GT for 2008 / G8 GXP added for 2009) The SS only came one way - completely loaded. Only options were the choice of transmission, a sunroof and a full-size spare. Adios, Pizza Bob- Official Wheel Gun Picture Thread
Right...- Official Wheel Gun Picture Thread
OK, I'll share four interesting Smith & Wessons (some of these have been posted before)... First up is the one that Alec requested - and given the breadth of his competitive Smiths, I'm flattered. This is a Performance Center 627-4 chambered in .38 Super. These were made ca 2003 for the distributor Bangers. I believe that there were two production runs of 300 guns each. This is from the first run and is #214. It has a non-fluted stainless cylinder (chamfered charge-holes) in DLC black and a 5.5" barrel. It came with both a ported muzzle cap and a plain one. It has a ball detent in the yoke. I use this gun for USPSA and ICORE and as such have changed out the sights to a plain LPA rear and a Dawson FO front. It has had an action job and been converted to DAO. The grips are made by KSD. Next up is a gun that I had built in the early 70's. I was a big fan of Skeeter Skelton (a gun writer of the time) who was a big fan of the .44 Special cartridge. I badly wanted an N-frame .44 Spl. This was after Smith discontinued the Model 24 in 67 and before they reintroduced it in early/mid-80's. J&G in AZ had original 6.5" Model 24 barrels available. I bought one and then found a Model 28-2 for the foundation of the conversion. George Matthews of Downey, CA did the conversion which consisted of boring out the cylinder - including rebating the chambers and squaring the face, and installing the barrel. It had a Patridge sight on it, which I had changed to a Baughman ramp with a gold insert. My buddy and I changed the trigger to a smooth combat trigger and installed a Model 14 SAO rebound spring (this was well before the days of just buying a Wolff spring). The optic was added sometime in the 80's and is a first generation (Japan) Tasco ProPoint red dot on a B-Square mount. The grip is a custom, one-off Hogue monogrip in Micarta with brass spacer. The next two are limited run S&W L-frames. First is a Model 646, which is chambered in .40 S&W. Smith made about 400 Performance Center 646's with slab-sided barrels. Several years later they discovered left-over cylinders from that run. Smith is famous for never letting anything go to waste, so they utilized the remaining cylinders in a production run of regular production 646's with the round profile barrel with full underlug. There were appx 300 of these made. I used this for IDPA, until I retired it several years ago. It has an LPA plain rear sight and a Dawson FO front and basic action job - light stoning, Wolff springs and chamfered charge-holes. The grips are from the Smith X-frame Emergency Kit (they made an orange and a yellow one - one in .460 and the other in .500) Lastly we have what is known as a Brazil Contract Model 586-4. These are unique guns in a number of respects and it is hard to pin Smith down as to number made and how many ended up in the U.S. If you have the SCSW (Standard Catalog of Smith & Wesson) 3rd Edition and the fourth edition, you will notice there is additional info in the 4th edition - I was the source for that info. The most obvious feature is that these are chambered in .38 Special, not .357 Magnum. They have a 4.2" barrel which is the legal minimum for importation into some countries. The SCSW 3rd Ed talks about the 586-5 Brazil Contract guns which were shipped in 1993. The paradox is that the 586-4 (a chronologically older engineering change) were shipped in 1997 - four years after the 586-5's. The contract for the 586-5s was filled and the small overrun (<30) of the 4.2" guns were sold to U.S. distributors. The research that I did indicates that the second contract (the 586-4's) may have been canceled and the entire order sold to U.S. distributors, but I found nothing to corroborate this. Even if true, we are talking only several hundred guns. These 586-4's came with several features not found on regular production 586-4's. They have MIM cylinder releases (reg prod 1997) and MIM triggers (also 1997, but part of engineering change 586-6), yet retained the hammer mounted firing pin which was dropped in 1997 as part of 586-6. Suffice it to say that these are Frankenguns from the factory. This is a current IDPA gun and, again has an LPA rear sight. The front is a Dawson FO, but the original blade was integral with the ramp and base, so the blade and base were machined off and a Weigand sight base was installed that uses the interchangeable front blades. Light action job & springs and charge-hole chamfering plus the X-frame grips. Sorry if I got mired in minutiae, but that's what makes these special - besides, you asked for it. Adios, Pizza Bob- Gun Safe Rifle Organization?
I saw this advertised, but thought it was too much $$$$ for what it was. Envision an engine exhaust valve, but with a long stem. On the mushroom end it is covered with Velcro and the "roof" of the safe with corresponding Velcro . The long stem is stuck down the barrel and then it is extended upward to mate the Velcro surfaces, thus making the rifle free standing, but supported by the stem/dowel down the barrel. Adios, Pizza Bob- Official Wheel Gun Picture Thread
Too many- Inherited 7 Scopes, Need Help Identifying
All but the one on the extreme right are inexpensive rimfire scopes - 3/4" tube - the lone 1" tube scope is a Lyman All American which is/was a good scope. If the optics and reticle are clear it's worth hanging onto.. Adios, Pizza Bob- Howdah pistol
Why wouldn't it be legal? Works for me. - Jewelry Store Recommendation