Everything posted by Pizza Bob
-
Past 50 meters with AR-15. What scope/red dot.
Maks: When I do that people keep trying to push me back in the ocean :mrgreen: Adios, Pizza Bob
-
Sighting in a red dot relfex
That's the idea. I have also used a laser pointer down the barrel. The confines of the barrel are so tight that it'll be, more or less, concentric with the bore - if you get out of line the laser pointer dot will disappear (hitting the side of the interior of the barrel). Again, see where the LP dot is and compare it to the red dot of the sight. Adjust sight until they coincide. Adios, Pizza Bob
-
Valley Forge Gun Show
Come on, VF is just a straight shot down the NE Extension of the PA TP. I often come up your way for the Forks of the Delaware shows at Ag Hall. Eagle Arms also has shows at the Roadway Inn (used to be Days Inn) up by the Mack Dealer. IMHO, the VF show is better than either of those and worth the trip. Adios, Pizza Bob
-
Valley Forge Gun Show
It wasn't the AG, the PASP took it upon themselves after the change in the federal 4473. The PASP recently reversed themselves on this. Guess Corbett reined them in once again, as this was illegal. That being said, I recently bought a complete lower from a PA dealer - and regardless of the above nonsense - was told that it still had to come in to NJ via a FFL. Complete long gun = OK (providing it is compliant). But a handgun or receiver has to be transferred from an NJ FFL. Adios, Pizza Bob
-
evil features, is this true?
Since your pistol grip is one evil feature, you're done. One more, like your collapsible stock, and you have entered the "prohibited zone". You need to pin your stock. Sorry to be the bearer of bad news. Adios, Pizza Bob
-
Valley Forge Gun Show
The VF show is definitely worth attending. Missed the last one (week before Christmas) because of the weather. Will definitely make this one. Adios, Pizza Bob
-
Sighting in a red dot relfex
If your 15-22 works like a centerfire AR, just pull the rear pin and tip it. Pull the bolt assembly out so you can look down the bore. Put a target up as far from you as you can get in your house (down a hallway, across the basement - you get the picture). Prop the gun up and look through the barrel. Center the bullseye of the target in the barrel (POI) and then look at your red dot to see where it is printing (POA). Adjust the red dot until both views are the same. That will put you on the paper until you can get to the range. HTH. Adios, Pizza Bob
-
Opinions Wanted
This is a new gun - so no refinishing is in the works. Already sewed the seeds for this as a bargaining chip, as this transaction is my consolation prize for losing the auction on another of the same gun with really nice wood. I'm inclined to go with the less spectacular/more even choice. It will be a shooter - not a wall hanger or safe queen. Adios, Pizza Bob
-
Haven't applied for permits since OGAM went into effect...
Ben: There is no statutory limitation on the number of PPP's you can apply for/receive. If your local PD tries to limit you to one, then ANJRPC wants to know about it. Report PD's that are limiting PPP's to one a month, here: [email protected] Since permits are good for 180 days (with the one renewal), theoretically you could make use of 6 permits. Adios, Pizza Bob
-
Opinions Wanted
I have the opportunity to purchase a particular rifle. The dealer has three of this same model. Part of the cache of this model is the wood used to stock it. Of the available three, one has spectacular wood on one side of the stock - turn it over and it is plain to no grain on the other side. The other two have just "nice" figure (but far from spectacular), but it is all over - even at that, still one side is slightly better than the other. Which do you choose - the one-sided wonder, and just never turn it over? Or the semi-plain Janes with more even figure? Thanks for your opinions. Adios, Pizza Bob
-
AR pics, lets see'um!
- Can only apply for one permit?
You don't have to take on that responsibility - simply report them to the ANJRPC, and they'll straighten them out. You actually have 180 days total (with renewal) on the PPP's so even 6 at one time isn't out of the question. Adios, Pizza Bob- Bringing guns to PA
do you have a link or citation for this piece? I apologize, I extrapolated from reading this thread on the PAFOA forums... http://forum.pafoa.org/general-2/57519- ... erset.html But in re-reading it I see that the OP had a loaded mag in with (but not in) his firearm and he was arrested for carrying a loaded gun. A loaded magazine, in and of itself, is not considered a loaded weapon as long as it is separate from the firearm - and separate would mean in a different compartment or case. Adios, Pizza Bob PS: Maks, you can OC in Philly, but it requires you to have a LTCF - not required to OC anyplace else in the state (with the exception of a motor vehicle).- Bringing guns to PA
Keep them cased, separate from the ammo and you should be fine. Unless you have a CCW valid in PA, you also want to make sure that your mags are empty - a loaded mag is treated the same as a loaded weapon and without a CCW (or LTCF as they say in PA), you're in a world of hurt if caught. IANAL Adios, Pizza Bob- What if?
If NJ adheres to the law ( ), NICS records are deleted within a short time period after the check is run. Only exception is a rejected NICS check. If this is the case, OGAM will have to be tracked at the NJSP or local PD level based on the copies of the PPP returned to them. Adios, Pizza Bob- An interesting Sat Morning at the Bullet Hole
The fact that all the black junk, on the shoot-n-see target, falls off, nicely hides the powder burns.- 10/22 charger
So, apparently the Charger is available in NJ. Just curious how these get past the 50 oz. rule? According to Ruger's website, they weigh in at 56 oz. Adios, Pizza Bob- Never knew this about the NRA
Sounds like the Neal Knox days, yes?- I think I want a Desert Eagle...
Hey Maks... Found this for ya' http://sigforum.com/eve/forums/a/tpc/f/ ... 3780040102 It seems to be the pimped-out version too. Good luck! Adios, Pizza Bob- Actual process for permit extension?
Took me about 10 minutes. There are boxes on the current permit for extension. All they do is use a rubber stamp of the chief's signature and redate them another 90 days hence from the initial expiration date. Process? We don't need no stinkin' process.- NJ resident keeping guns in other states?
Yeah Maks, I have one - complete with my NJ address. To the OP, as long as the gun is legal in CT, why would it matter, as long as the person storing it for you is OK with it? There is a certain amount of liability attached, but not more than if you had the gun here. IANAL Adios, Pizza Bob- NJ State Constitution
There is no second amendment equivalent in the NJ constitution - which is a major part of the problem. That is one reason why everyone is so anxiously awaiting the SCOTUS ruling on incorporation. Adios, Pizza Bob- Eurooptic?
Never dealt with them, but I love the "Non-paying customers" part of their website (under "About Us"). Also like the used optics section - some real high-end bargains to be had there. Adios, Pizza Bob- Nikon Monarch 6-24x50 SF
I am a Bushnell fan too, I have a few lower line banners on my .22's they are clear and hold good zero. Probably will go for one when I get a .308, just wish they made a mil-dot version. I have two Bushnells - the 4200 Elite Tactical and an unbranded Bushnell built to 3200 standards but only 3X magnification (8-24 power) rather than 4x. Both are Mildot reticles. The 4200 is a 30mm tube 6-24x50mm with side focus. Mildot values are true at 12x. Again, PM me if you are interested in the source. Adios, Pizza Bob- What's a good place online to buy RRA stuff
No, it would have to be ordered. Mine took about three weeks. I think RRA is pretty well caught-up, so I doubt that your wait would be more than 3 or 4 weeks. I ordered mine with the match trigger and the Hogue grip - so may have been built to order. Adios, Pizza Bob - Can only apply for one permit?