Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. Poppycock & balderdash. Make mine a Smith - all day, every day. BTW - the S&W has a 4" barrel. Adios, Pizza Bob
  2. It will be interesting to see how this plays out in court. Something that was in the one article that is puzzling - it was stated that they were returning from retrieving the gun from a pawn shop in Vineland. Since this is considered a firearm, under NJ state law, and since it is illegal for a pawn shop to make a loan against a firearm, shouldn't the pawn shop be charged too? They also claimed that they stopped and had lunch on the return trip from the pawn shop - another chargeable offense? Just thought I'd stir the pot some more. Adios, Pizza Bob
  3. Loved Edelmans - used to frequent the one in Langhorne. There was also one over on Rt 309 just north of Chalfont, PA, as well as the one in Pennsauken. Are you all aware that the owner - Leslie Edelman - is the owner of Kimber?
  4. Leave it up to NJ.Com (Star Ledger) to put a subtle negative spin on the poll. The article which generated the poll was about the NRA's Eddie Eagle Program. The first choice in the poll is: Teaching children to respect, properly handle firearms is a good thing. The Eddie Eagle program is about keeping our children safe and is specifically about NOT handling firearms. The three main points of the program - what the children are taught - are, if you find a gun: 1) Do not touch it. 2) Run away. 3) Tell an adult. It seems to me that the folks at the Star Ledger would benefit from some NRA classes - like that could happen. Adios, Pizza Bob
  5. You do realize that if you get an SSR that you are obligated to shoot it in IDPA, don't you?
  6. At the discretion of the CLEO of the issuing agency. Some want it done before the initial 90 days are up, some want to wait until after. Regardless of when it is extended the extension is only good for 180 days from the original date of issuance. Call your local PD and find out what their procedure is - in my municipality, it's a rubber stamp done while you wait. Adios, Pizza Bob
  7. There is no current ban on interstate sales of long guns. There is a federal law that says in order for a resident of one state to purchase a long gun in another state, it must go through an FFL of either state and the laws of both states (purchase state & resident state) must be adhered to. Which means that if I go to PA and buy a long gun, I must have a FPID and the dealer is to fill out two COE's (one for him and one for the purchaser). The dealer would use PICS for the background check. What makes you think it would be different with handguns, should this become the law of the land? At that point it simply becomes a matter of whether out of state dealers are willing to do the extra work to sell a handgun to a non-resident - just as it is now for long guns. A lot of people are reading way too much into this. Adios, Pizza Bob
  8. If this finding becomes further reaching - meaning the appeal is won on several levels, I believe that it will still boil down to a process similar to what we have now for long guns - that is the laws of both states - the state where purchased and the state of residence of the buyer - must be adhered to. Therefore a PA resident wishing to buy a handgun in NJ would have to have a P2P issued by NJ (I would expect the NJSP). NICS check is always done at the point of purchase - so if you are in PA a PICS check is done. POC's access the same FBI maintained data base for background checks, but POC's may check further in state databases - which would be moot for a non-resident. If you wanted to purchase a handgun in another state, you would still need a P2P. Someone asked what FFL would be bothered with all of the NJ paperwork - the answer is any that wish to make the sale. This is a good first step - but a tiny step at that. It could be years, and many appeals won, before we see any positive change resulting from this ruling. Adios, Pizza Bob
  9. You know, like posting about it on a widely read forum.
  10. Great round, regardless of what you shoot it from. I have a Cooper LVT in .17 HMR w/a Weaver T-36 scope and an Anschutz 1502D HB in .17 HM2, also Weaver equipped with a 5-20X44 both are about the most fun you can have sitting down. Yes wind can be a problem and it pays to take your cleaning equioment to the range with you. Just a ton of fun. Adios, Pizza Bob
  11. Somerset is the third Sunday of every month. March is also when several other clubs (outdoor) in the area start up again,
  12. Welcome to the forums. You seem to be a prime candidate for Gun Games. IDPA is a good place to start. Your modified Glock falls outside the rules, but the H&K or Sig would be fine, as would the PPQ-M2 - BTW, the Steyr M-A1 is what the next generation Glock should have been - same designer (Bubits) involved. There are still slots open for the Somerset match of 2/15. This is indoors, so not weather dependent (still a tad frosty - dress warmly). Space is limited so you must sign-up here... http://www.somersetidpa.com/matches/ You will need to arrive early to get the new shooter briefing. Check out the stickies at the top of the compteition and fun shoot section. Other than your gun, you will need a holster (trigger must be covered), three magazines and two single or one dual mag pouch and about 100 - 150 rounds of ammo. Eyes & ears of course. You will never go back to static target practice again. Adios, Pizza Bob
  13. If you don't change your die setting, the internal volume will remain the same. You would only change the volume by seating the bullet deeper in the mistaken belief that you need to compensate, somehow, for the shorter brass. Just leave things alone, load and be happy.
  14. Bought an inexpensive ultrasonic unit because the dog has very dry skin. Her flews were actually dry & chapped - looked like raw hamburger. Just run it at night in the room where she sleeps (all right, I'll admit it - she sleeps with me) and it has made a world of difference. Adios, Pizza Bob
  15. I'd recommend a 686, but if you got one then you'd want to sell the Taurus and Chiappa and you'd be right back to square one again.
  16. Starline brass is made to SAAMI standards, which means it doesn't exceed the maximum specified length. All .45 ACP brass and new ammo that I have seen, comes in under max length. If your gun functions with the cartridge OAL at which your dies are set, then a case that is nominally shorter won't make a difference - just means a little more of the bullet will be exposed. No need to reset your dies. Starline brass is good quality brass and used by many commercial/boutique ammunition manufacturers. Adios, Pizza Bob
  17. A weak grip comes into play not just to rack the slide or to make a semi-auto function properly, it also means she will be easily fatigued by the recoil - even the recoil of a .38 Spl. Given the little we know and assume, I'm good with the recommendation of a revolver (big surprise, I know), but specifically a S&W Model 48 with a 4" barrel. That is a K-frame chambered in .22 Magnum. Several manufacturers are now loading SD ammunition in this caliber (Speer, Hornady and Winchester). The factory grips would most likely need to be changed to something slimmer and made of rubber. I think that .22 Magnum is a viable home defense caliber - not one that I would choose for myself, but I think it ideally suits the circumstances in this case. JMHO Adios, Pizza Bob
  18. What you have is a McGivern gold bead mounted on a patridge sight. McGivern's are mounted on the surface of the sight. A Call gold bead is recessed into the face of the blade and is flush.
  19. Either the 627 you bought or the SSR are great guns. The 8-shot N-frames rule in USPSA revolver class - although an upper tier shooter can still be competitive with a 625. The SSR was made for the division of the same name in IDPA. There are active clubs for both discplines in the area. Shooters that compete with the 8-shot .357/.38's use shorter cartridges - ie: .38 Short Colt or .38 Long Colt (both shorter than .38 Spl.) - to facilitate faster loading. The moon clips also tend to be headstamp specific. If you don't already have one, I highly recommend a BMT tool to load and strip the clips - here's a link... http://www.bmtequipped.com/products.php I currently have 7 guns that use moon clips. I think they're the greatest thing since sliced bread. Adios, Pizza Bob
  20. Birchwood Casey makes a Super Black flat black pen also. Worked great for where I cut off the ears.
  21. I'd say that you are off to a fine start. That Forester press used to be the Bonanza Co-Ax press and was/is one of the finest single stage presses made. I have one in storage along with two Dillon RL450B's and a Rockchucker - haven't reloaded since 1991 - but someday. Concentrate on one caliber first and buy the accessories needed to load that caliber. What is the parent case of the .458 Socom? Are there any extraordinary steps in forming the brass? Maybe concentrate on that first. I'd also use a single stage press for your precision long gun rounds. Plinking and handgun rounds are better loaded on a progressive, that may come in due time. Good luck with your new venture. Adios, Pizza Bob
  22. Pizza Bob posted a topic in General Discussion
    I do a round of forum perusal each morning and among those I look at are our neighbors over at the PAFOA forum. This morning when I tried to bring it up, I got a warning that it was under attack and there was malware there that could delete files from my hard drive, steal passwords etc. Anybody else encounter the same? Adios, Pizza Bob
  23. Sorry man. That sucks.
  24. OK, I'll play. Really prefer centerfires, but have managed to amass these over the years... Adios, Pizza Bob
  25. If you are into bullseye (or wish to be) then Citizens Rifle & Revolver Club, recommended by someone previously in this or another thread, is the place for you. Not many clubs that still have an emphasis on bullseye competition. http://www.crrc.org/crrc.htm Adios, Pizza Bob PS: While the long sight radius is nice to have, on the 41, the 5.5" barrel balances better - and the best of both worlds is the 5.5" barrel with the extendable front sight - pretty hard to find these days.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.