Old School

It's Oct 26th And I have a loaner rifle for you.

Truth - if it proved reliable, I wouldn't change it. The spring and guide are so short alignment shouldn't be a problem. Think how short the guide is on a 1911 GI.

Shawn - I saw the post and thought why the hell a 380 and spend "Colt Money"? Then I looked at the specs.... Light, small (I guess don't see dimensions) and the big plus is a REAL trigger with decent pull. Carried cocked and locked you seem to have a winner.

You guys know I'm a big CR supporter. But "LastShot" - can you do something about the cross wind at the 300yd range in the afternoon?

I'd appreciate that. Maybe we can have a hot shave meet-up.

Laugh, Laugh! What happened Frank Vincent?

Please tell me more about this and what else is a landmark. Before or after the hatchery? Eastbound or westbound? I'm 25 minutes away but would be happy to make the trip.

Thank you for the clarification - Old Timer

Good Job!!! Remember when the training was free done by volunteers? What happened to that?

Excellent idea...cheap easy solution

He was charged with burglary, unlawful possession of weapon, possession of weapon by convicted felon, possession of weapon for unlawful purpose, theft, criminal mischief and possession of hollow point rounds. Thief must have brought his own ammo from home...

Measure the cases and let me know. Bell mouthing / flaring the cases has nothing to do w/ your case length because after you insert the bullet you crimp again. BTW I'm right around the corner from you if you want to PM me.

IC...

Dies are made both ways. You have to adapt your procedure if you want to use those dies. Why can't you trim before depriming? I don't understand. And measure it is unlikely you'll have to trim.

It's pretty much common sense. Size, measure case length, decap and bell mouth, prime, powder, seat bullet and TAPER CRIMP.

This sounds like a traditional 3 die pistol. Chances are cases will not have to be trimmed because this case headspaces on the case mouth. If it chambers and locks up the case is proper length for this chamber. Do you load 9mm, 40,45acp? This is the same procedure and same case style. Spot check a few after sizing if you like but I don't think I'd bother or be concerned. Correct you want to check length after sizing and before decapping/bell mouthing. You know what? Check the length after sizing.

I'll look for it and text ya

Gaston was never known to be a nice guy! Kind of a sock cucker if you know what I mean? I have the book if anybody wants to read it.

Interesting and varied topics. http://www.guntalk.com/site.php Also available Sunday 4pm on Iheartradio

Use a punch as close to the full diameter of the pin as possible so, you don't peen the edges of the pin. Get a 2X4 and drill a relief hole for the pin to enter. And go to town on it. You may want to soak the bolt in a penetrating solvent first. I agree some are tough. And if you don't have everything clean inside it WILL slam fire. I see you shoot at CR. Let me know and I'll bring the stuff up there.

I down loaded "BulletDrop" free just gives you trajectory

Help me out here. 4.99 for IOS system when I search

That's right you're in PA, you have slot machine Indians. We have Atlantic City

Are they really Nicky? I'm gonna send you a PM and you'll know what a softy I've become and how I've been holding my sharp tongue.

Deleted my reply. Don't want to play this silly game any more. You are entitled to your opinion.