Everything posted by Pew Pew Plates
-
Ready for Full Body Scanners at the AP's
I guess you wont be flying from any airports that have them then :doh:
-
New from central Jersey
Howdy, and welcome to the mosin club from a fellow central jersian (Bridgewater)
-
Hunting License is in hand!
Keith? You took the class at the NRO? (thats where I teach and keiths a cool guy)
-
Military Crimp removal
http://www.google.com/imgres?imgurl=htt ... 29,r:0,s:0 You can see a commercial no crimped round, a ring crimp, and a 3 point stab crimp. Prevents primers from backing out just incase the gun is out of spec or loose. My 1919 hated 30-06 rounds without primer crimps with the .308 bolt because the slot is a tad wider. The primers would back out and sometimes jam it up. Crimped primers, no problem. 30-06 bolt fixed that though
-
Mossberg 500 Persuader/Cruiser
Cyl bore will be "OK" for shooting clays from a thrower next to you, out in a field or whatever. But when you say "trap", its an actual regulation sport. You wont be any closer than 16 yards from the thrower which will then randomly spew high speed targets away from you. For this, your gun will put you at a severe disadvantage. Think of you having a flintlock pistol vs a few squads of navy seals. Yeah, that kinda disadvantage Skeet will be easier with the cyl bore but still at a bit of a disadvantage.
-
Recoil buffers
The pressure is not, in and of itself, what batters the frame and slide. It is related to the duration. Think about a shotgun recoil buffer. Your shoulder feels better after shooting a shotgun that has one than one without. The recoil was not magically dissipated into nothingness, but rather it was spread out over time. It is the impulse that causes the damage. Buffers simply reduce the impulse by slowing down the interaction. Yes, but its not like (arbitrary numbers) the stock setup would cause 1000 lbs of force over .1 seconds and a buffer would be 1000 lbs over .2 seconds, its more like 2,500 lbs over .2 seconds. Sure the impulse is over a greater length of time but the actual force is increased. If it was so simple to make such a large improvement why dont all guns come with them? Plus, your still bouncing everything foward at an accelerated rate. Why not just use a heavier spring for heavier loads?
-
Knoxx SpecOps Stock on a Mossberg 500
The appeal of a pistol caliber carbine is it is easier to shoot accuratly and rapidly (low recoil), shares ammo, longer range than a pistol, light and handy compared to a rifle with cheap ammo (for 9mm at least)
-
Florida non-resident CCW application?
Really easy to do yourself, I'de reccomend that route. I did it myself and everything turned out A-OK
-
Federal 9mm 115gr $10.95 a box AIM
$10.03 per box after tax at wally-worlds in PA for fed champion.
-
Knoxx SpecOps Stock on a Mossberg 500
I need a $1.99 part, tack it on your order?
-
New Purchase: .308 Remington 700 SPS DM with scope. $499
I have the SPS varmint in 308 and handload for it too. You will LOVE it. I have an HS precision stock on mine and get consistent .5moa out of it. Fired it at 600 yards got 2-3/4" in the wind. Mine really likes 43 grains IMR4895, hornady TAP brass, hornady A-MAX 168 BTHP, CCI LR primer. Its a close duplicate to factory Hornady TAP ammo, which shoots the best for factory ammo in my rifle. I was there friday, also. Got there 6:30PM and got number 71. 2 hour wait!
-
Recoil buffers
I think of it like a K frame Smith&Wesson. You can shoot stout 357 loads through it, but it was really intended for 38special and the frame is not meant to withstand the battering from a steady diet of magnums. Eventually you will shoot the gun loose and out of time. My Dan Wesson CBOB can handle any 10mm load too, but consistently firing 135grain @1600fps is a bad idea. Putting in the recoil buffer has not impeded function in any way (for regular or hot ammo) and it provides a shock ablsorber between the slide and frame for those infrequent times when I do run the hot stuff in the gun. Yeah but you are actually "connecting" the slide/frame at an earlier moment due to the space it takes up, where the force is actually higher. So while the connection isnt as "sharp" due to the buffer, the force exerted is actually higher.
-
Videos from the machine gun shoot today.
I dont know, the blast wave so so concussive I dont even remember the recoil LOL but i know for sure it wasnt bad, ide say less than 12GA
-
NJ FID application data collection effort
Bridgewater permits guys name is Rob Hanlon. He isnt an officer, he is actually a civvie.
-
Knoxx SpecOps Stock on a Mossberg 500
I have a super duper full set of ratchets, extensions, metric and standard. everything from tiny tiny model screws to over an inch that your welcome to use to. We can have a stock fitting party
-
Just bought the holy grail!
Yeah, it will be coming with me all the time. and you guys can play with it, too. Just dont wear rings are any scratching items :naughty:
-
Videos from the machine gun shoot today.
Super fun, untill the bolt broke He had a spare but at home. lame
-
Basilone Parade
Yeah it was me picking my girlfriend up from highschool back in the day on halloween LOL i got some pretty funny looks
-
Just bought the holy grail!
1800. I cant find anything not new about it except it wasnt labeled as such. The butt is perfect, everything is still new lookin'. No traces of firing more than once or twice maybe.
-
Videos from the machine gun shoot today.
Yeah the sten wasnt lovin' the 50 round mags. The barret was against a bowling pin at a mere 150ish yards. I dont care what I hit, it was a BLAST
-
Videos from the machine gun shoot today.
Sten, AC556, Barret. The AC556 was by far the most fun and awesome sounding! Total FA list: Thompson m1928a1, thompson m1a1, sten, AC556, PPSH41, 1917a1, 1919a4. I think that was it. And the barret which was damn cool! This is mostly one guys collection and its by his place in PA, in a old strip mine. So fun... Thats my SAR-2 and my OCd glock 19. Hit a bowling pin with it on the 3rd shot at 120 yards! I shit you not! No, I wasnt able to repeat that one! Second pic has 4 shells in the air, m1a1.
-
Just bought the holy grail!
...of shotguns! A browning cynergy, used but immaculate from cabelas gun library. 12ga, 28in barrels. so nice...
-
Basilone Parade
I'm in it almost every year with my dads scout car with guns mounted all over it :mrgreen:
-
Knoxx SpecOps Stock on a Mossberg 500
I'm sure some steel wool would take it off without looking ugly. You'de then have a bare in the white trigger (assuming its steel) and it would be shiney silver. Paint would wear off. You can cold blue the trigger after taking off the "gold" plating (I have some you can use)
-
Knoxx SpecOps Stock on a Mossberg 500
I would agree with sirsloop with the addition of safety off. If you want to "lock" it up dont use the safety, just keep it cocked. The unlock switch is easier to get to than the safety with a PG and harder for strangers to figgure out. But if I had the choice, no safety, dropped hammer, empty chamber slide closed tube filled