Everything posted by Pew Pew Plates
-
time for the classic AR-15 VS AK47/74 THREAD!
Interesting about the AAR. But you dont know the history of those mags. We go into firefights with nice, relativly new mags. Some of the mags serving the AKs in iraq are from the 50's and they work fine. So maybe in a that firefight the AKs had more problems, but maybe because those mags were dug up from the bottom of a swamp or somethin' lol
-
New Guy From Hillsborough.
Hey from bridgewater!
-
Mossberg 590 or Benelli Supernova?
BS. You can. It ain't ideal, but you can. But, I do agree with about trying them out first. They're not for everyone. And the cost of adding ghost rings to a gun that doesn't already have them can be a bit steep. Sure, its not impossible. But tracking/leading a clay with the ring/ears in the way? wayyyyyy less than ideal.
-
time for the classic AR-15 VS AK47/74 THREAD!
Its intereting you mention mags as an AR-15 positive. Everything ive read AND experienced is the opposite. AK mags have solid steel thick feed lips and steel bodies. Never heard of anybody having mag issues. On the otherhand, I've heard of AR mags having the floorplates randombly blow off during training, feed lips bend, just general finicky unreliable and un-sturdy. Why do you need fancy anti-tilt followers and such? And everyone saying "these mags are good, these mags are bad"? No such thing as bad mags on an AK unless the body is severely dented in (which would put any mag out of commision)
-
time for the classic AR-15 VS AK47/74 THREAD!
Basic! SCAR and ACR arent close to a normal AR-15 mechanically
-
Mossberg 590 or Benelli Supernova?
I'de try it without 'em first. Waste of money IMHO and then you cant use the gun at all for clays. The rear sight mounts on the reciever. I can place slugs on a sillouette at 100 yards with nothing but a bead sight on my trench gun, smooth bore and no rib. Better peripheral vision, better in low light.... I dont see the need for ghosts.
-
time for the classic AR-15 VS AK47/74 THREAD!
Lets keep it to AR-15s, M16a1s, A2s, A3s, A4s. Unless you want to expand the "other side" into AK103s and such Its true, the AR is more modular. But the AK can mount some stuff also. And keep in mind, the whole weight gain thing is moot with an AR when you have 12 pounds of crap on it. And that 12 pounds of crap is uselss when it JAMS!
-
time for the classic AR-15 VS AK47/74 THREAD!
Ok, its that time. Vote for which you would rather have IN COMBAT (not paper punching) I vote AK because: -I'de rather it go bang and not be a tackdriver, than have it go click and not shoot anything -Hitting a man sized target at ~300 meters is good enough for an assault rifle -.223/5.56 is a varmint round... 7.62&5.45x39 were designed from the start with military use in mind. http://www.madogre.com/interviews/Hate_the_AR15.htm Thats a must read for any AR lover EDIT: Think of generic AKM/AK74 rifles and standard mil issue M16s, nothing fancy/exotic.
-
Battle Comp, NJ Legal?
Ooooooh your askin' for it :naughty:
-
Battle Comp, NJ Legal?
Or a garbadge can and an AK to replace it *flame suit on*
-
Making a single shot 7.62x25
Hey ted, this may be up your ally! Ive heard of decent accuracy out of those rossi/NEF break open rifles in .308 with chamber inserts shooting 7.62x25 (yeah I know bore diameters are different). How hard would it be to set it up so that it doesnt extract the whole insert, but just the empty 7.62x25 case? Are any of you familiar with these rifles? It would be a fun plinker. Ideally I could get the Mcace guy (or whatever the site name is) to make a 7.62x39 to 7.62x25 adaptor. Less bullet jump and proper bore diameter. Hmmmm...
-
Does anyone sell or do the work for Saigas in NJ?
AK in .223...yuck. Few things: -Part of the AKs reliability comes from the round itself. 7.62x39 & 5.45x39 both have heavy tapers. This means the round, if fired in really crappy situations and has dirt around it in the chamber, only has to extract a tiny bit before its clear of the chamber walls (think of a wedge). The .223 while tecnically tapered, is practically straight walled. It will have to extract against that resistance the entire way out. This does not lend itself to relaibility. - The AK wasnt designed for it, dont eff with it - .223 is a poor performer vs both the other rounds - 5.45 and 7.62x39 are both very common also, and for SHTF, what if some country that uses those rounds attacked? now THATS the available round - You can make 5.45 very available to yourself without worry by buying it for 10 cents a round. So cheap!
-
FMJ VS SWAGED OR ROUND LEAD
Swaged lead bullets will the most accurate because there are no voids in swaged bullets. Hard cast bullets or FMJs can have voids. Lead will also have the nice side effect of never wearing your barrell out. I've heard over 100,000+ rounds on one barrel with no wear. Match life with a 1911 and FMJ is 5,000. If you load properly(Proper crimp, sizing, and most importantly velocity matched to hardness), you will not get more lead fouling than you would copper fouling but lead is a bit smokier. Glocks theoretically will foul fast with lead rounds but you CAN reload for them with FMJs (and when montana golds are so cheap, why not?!). I reload for my glock 19.
-
Does anyone sell or do the work for Saigas in NJ?
Well, they are a better price than a converted saiga and have more historical value than either, but not built AS good as an arsenal as far as cosmetics go. LOOK OUT FOR THE LANCASTER AK-74S! I've head HORROR stories about them with wrong sized gas ports, beating the gun apart, and then they do nothing to fix it. Worse customer service ever. Just google lancaster AK-74 review and see for yourself.
-
Does anyone sell or do the work for Saigas in NJ?
The 350 quote was including parts FYI. Also, arsenals are more than 6-800 not 1,000 5.45 is an amazing round. It performs very well but most importantly to me (I dont use rifle for HD, nor target work) it is VERY VERY cheap (like, 10 cents a pop cheap) Corrosive is easy to clean up after. I take a bristle brush, warm water and dish soap and just scrap the crap out of the whole rifle (apart) in the slop sink with the soap and water and blow off with air. After that, clean the bore as normal. Takes me about an hour maybe a little more when im shooting about 500 rounds. That includes the time I take to polish up the gas piston because im super anal like that :shhh: This is my SAR-2. If you can find one, buy it. Its the older brother to the WASR-2, but much nicer. It has dimples, its an orig. hi-cap romy reciever. The mags are welded up to 15 rounds.
-
Does anyone sell or do the work for Saigas in NJ?
Yeah but the red jacket premium isnt too much, other builders are up there in price, too. Also, they DO do really nice work, not just a name. Anyways, its not as easy as a dremel and drill for the front end work. Pistol grip, yes if everything goes smoothly.
-
Does anyone sell or do the work for Saigas in NJ?
Will at Red jacket is the top builder in the country and can convert, you just ship the rifle to him UPS ground or whatever, and he will ship it back to your door. If you want to have someone else do the conversion, I suggest you just buy the arsenal rifle. It is a pro-converted saiga. Will does pistol grip only conversions at $350 plus shipping, a full conversion is going to cost nearly as much as a complete arsenal (and you still have to pay for the base rifle). Of course, there are plenty of other builders out there that offer AK services, but they arent cheap either. So my thoughts: Buy an arsenal rifle (An already converted saiga) Buy a saiga and leave it alone (uuuugly)
-
Saiga Question
If its semi auto I believe so. As far as length is concerned, you can pin it to any length. Even all the way in you wont be less than 26"
-
T/C Encore Pistols
You sir are correct. So yeah, you can throw a huge barrel on there if you want and keep no stock. But since its still a pistol, no 7.62x54R :naughty:
-
T/C Encore Pistols
I think so, as long as you keep withen jerseys weight limits and such. I dont think theres any length limit on a pistol.
-
Saiga Question
Yes
-
The Official NJGF Photo Thread!
Is that S&B or wolf 00 buck?
-
The Official NJGF Photo Thread!
You should always test ~200 rounds of your HD ammo to make sure it functions flawless and to see if it shoots to the same point as your practice ammo. Yes, its expensive, $150-200+ worth of ammo if you use the good stuff, but your life is worth more than that, no? Feliks, S&B JHPS are OK, just make sure to test 200 of em. They wont perform as well as the higher end rounds but there a helluva lot better than FMJs.
-
9mm or 45ACP?
Yeah, or well over 2,000 if you use target loads lol. But i'de reccomend 00 buck which is 9 per pellets per load so 45 pellets assuming 4+1 in the 870
-
T/C Encore Pistols
And: 7.62x54r wouldnt be "out" as far as a pistol barrel goes. You just cant shoot surplus out of it. Plus the whole problem of banning surplus ammo for everyone in the country