Everything posted by Pew Pew Plates
-
I'm BACK!!!
From one bad state to another! Damn! You missed nothing, lol
-
Please stop reloading ammo, it's dangerous.
Ray, you are doing what anti gun people do. Ignorance leads to an anti-attitude. Instead of being ignorant about guns you are ignorant about reloading. Instead of accepting it as something you dont know, you go against it.
-
Please stop reloading ammo, it's dangerous.
- Considering trying trap shooting - starter shotgun
Another thing to keep in mind for the pump vs O/U debate often versatility comes into consideration, as I even mentioned myself! But upon further thinking, I've come to some more conclusions: Usually versatility is guaged by how many different things you can accomplish with one firearm. Typically with a shotgun, the considerations are clays (sport), home defense, and hunting. Lets say that you decide to buy a pump shotgun because you want to bird hunt and use it for home defense in addition to clays. First though is, wow! Lots of things! Pump would be great for this! Well, lets look further into the situation. First off, if you buy a pump gun to use for home defense in addition to anything else, you are going to get tired of changing the barrel before and after every range trip (unless you never shoot ). So right there, no matter what combination of diciplines you engage in, your home defense "versitile" pump gun is PROBABLY going to wind up being a HD-only gun. OK, so now you have basically said well yeah maybe I should get a cheap pump gun and keep it in HD configuration as a HD gun. Now, whats left? Clays and hunting. What can a o/u do and what cant it? Well, it makes a great hunting arm! Great for hunting flying things... so i wouldnt quite count the O/U out for ALL hunting! Infact it is superior to a pump for bird hunting, and clays. There you have it, the pump doesnt seem as versitile does it? Sure its still *more* versitile but considering the O/U can do alot of hunting tasks and considering you will probably get a pump gun for designated HD, the only thing it cant do as well as a pump is deer hunting. Everything else it excels at! Also, with two barrels you can run 2 different chokes and chose which one you want to fire first. This makes you better prepared when the clay or bird may be at varying and unpredictable distances. This is especially usefull with sporting clays. With a pump you have to pick one choke and cross your fingers, you are stuck with it! It especially sucks if you are doing a report pair @ a sporting clays range and one clay is really close...and one is really far.- Considering trying trap shooting - starter shotgun
For pump you should get to start either the mossberg 500 (yuck) or remington 870 (yess!), both run around $300-400 Chokes run anywhere between ~$20 and ~$100 each depending. Any shotgun will come with at least one (or two with an over under). IMHO at a bare minimum you need cylinder, IC, mod, & full. Improved mod is another nice one to have kickin' around. So figgure 3 extra chokes, somewhere south of $100 more. Not an absolute requirement, but would be good... For O/U I would avoid the stoegers, mossbergs, rugers, and go for at minimum the CZ lineup. They are the best bang for the buck followed by the brownings. From there it gets crazy expensive crazy fast. Expect to spend ~$700 for a CZ O/U and north of $1k for the low end brownings.- Considering trying trap shooting - starter shotgun
12ga is reccomended. You can easily download a 12ga if for some reason its too much for you or your spouse, but its much harder to upload a smaller round! Barrel length effects your swing, and recoil. The longer barrel will kick less, will swing a little slower, the shorter barrel will point slightly easier and will be faster. However, since you are talking a mere 2" difference and since you are not a seasoned pro shooter you will not notice the difference. Go with the shorter tube. The ultimate all around shotgun is a pump. The ultimate clay gun is an over under. Pick your poisen, the o/u will make doubles easier and will also be easier shooting trap since you wont have to pick up/catch your hulls. Also, over/unders have shorter overall length for any given barrel length so they tend to point & balance better and are more compact. Whichever you chose, make sure to buy some chokes for it as well- How to get screws out of receiver?
You simply need a small screwdriver. One that is slightly too large at a 45 degree angle may work as well since they shouldnt be tight and wont need to go back in, but be carefull, you dont want to screw up the slot.- Efinger bound brook
All but one or two of the people there are pompus windbags.- remington golden bullet 525 brick at dicks
The goldenshits and thunderturds blow. Federal bulk packs are about the same price and is top notch ammo. When I pick through the misfire can at the range, %85 of the .22lr ammo in the bin is remington with multiple strikes around each rim. The rest of the stuff is from guns that were tweaked and barely even nicked the rim.- AK Variant Reviews (Pros Cons of various AK platforms)
Annnnd last but not least, the PSL! The PSL is not a "dragunov" but it is its own unique platform. While the SVD "dragunov" is its own platform, with a short stroke gas system not too dissimilar from the SKS, the PSL is just a juiced up AK. A REALLY BIG juiced up AK. It fires the 7.62x54R, so the receiver, bolt, carrier, etc is all that much longer plus the long barrel. Its quite an impressive piece, really. Accuracy is better than "typical AK" but will leave alot to be desired if you are a benchrest shooter. First off, its an AK action. It has alot of reciprocating mass, overtravel of the bolt & carrier, loose fitting parts, etc. But on the plus side, it wont jam or break! Then the other detriment is the barrel. These rifles were made to be carried all day and fired intermittently. Therfore, the barrels are light and rightfully so. However, if you try to sit down at the bench and bang out 150 rounds, you are going to see a rapid degradation of accuracy (mostly vertical stringing). They are accurate for what they were inteded as though, a few rounds here and there... I have fired it at 600 yards and got about a 1 foot group which is "minute of man" in my book. These are not sniper rifles, they are designated marksman rifles. They come with a 4x scope with dead tritium. 4x leaves a bit to be desired so I got an 8x POSP russian scope with red battery illumination. They really are a hoot to shoot. Very loud, very low recoil due to the weight of the rifle, the brake, and the spring loaded butt plate. As you can see in the photo, I have also added a cheek rest (ITC rail rest http://www.itcmarksmanship.com/c-14-itc-railrest.aspx) and a butt pad extender. The rifle is made for short people wearing jackets/armor, not us weekend warriors of larger stature. Without these, mounting the rifle is quite awkward, it has a very short length of pull and the "cheek weld" is more like a chin weld, so the cheek pad and butt pad REALLY improve the feel of the rifle, and I would say it is absolutely required if you are going to seriously shoot the rifle. Another required item is the RSA 4 point adjustable trigger. Its exactly what it sounds like, a 4 point adjustable match grade trigger that just drops in (standard AK trigger group). It will shrink your groups without a doubt and make it even that much more fun.- AK Variant Reviews (Pros Cons of various AK platforms)
Next up! SAR-2 The SAR-2 is what predates the WASR-10. The WASR-10s are made as single stack, 10 round capacity rifles. This results in the double stack rifles simply being chopped out and shimmed for double stack magazines which is usually fine, but is not proper. The SAR series rifles are built with slightly better fit & finish, and most importantly, on double stack hi-cap receivers with dimples. The SAR-2 is 5.45x39, which is an awesome round. It is cheap, accurate, flat shooting and no recoil. The SAR-2 was made during the federal ban so it is also NJ compliant out of the box. What I like about this rifle, which goes against how I typically buy, is that it is NOT correct for an AK-74 or AIMS-74. While the romanian AIMS-74 was indeed built on these receivers and had the 45 degree gas block thats about where the similaritied ended. The AIMS-74 had a wire side folder, donkey dong fore-grip, and a unique AK-74 style brake (but wasnt the common 24mm one). While the rifle can be converted to an AIMS-74 clone (which nothing else can!) I kept it this way since the clone would have to be nuetered with a welded open stock, welded brake etc. Since I got this as a shooter for corrosive ammo, and since im anal about cleaning my firearms (yes, even the AKs), I can not stand a non removable brake since you cannot properly clean the expansion chamber. It would drive me nuts, so I prefer the nude muzzle. Maybe one day when I'm out of state... What is strange however is the stock... its painted. Never seen that before... but whatever!- AK Variant Reviews (Pros Cons of various AK platforms)
OK, I have a few to contribute. All rifles and magazines are NJ legal. My new AES-10B RPK. Its basically a WASR on roids, made at the cugir arsenal with the same quality wood as found on WASRs. I havent got to fire it yet so my review on this is purely on fit & finish, although it would be very strange if it didnt go bang... The first thing you will notice about this is the pimpin' bipod. Its very solid when folded out and is quite tall so that you have enough room for the magazine prone. Also it has a unique club-foot stock which is so you can take your supporting hand and hold the stock tight into your shoulder. Should make for some nice bump-firing off the bipod Another few things that set the RPK apart from your typical AKM is the 1.5mm receiver, the heavy barrel, the bulged trunnion to accomodate the heavy barrel, the carry handle, and the windage adjustable rear sight. And when I say its a heavy barrel, I mean it! Pictures do it no justice, this thing is long and FAT! Next up is the polish milled T3 AK This is a real gem in the current market. Apparently only ~3k kits were imported and now they are hit & miss as far as availability goes, get one while you can! First, a little history. WASR-10s, saigas, PAPs, RPKs etc are all "AKM" pattern rifles but are commonly confused as "AK47" type rifles. Calling a WASR-10 an AK47 style rifle is like calling your boot a sock... This is true to the original T3! The progression of the rifles is as follows (I just copied & pasted this from here, great read http://browningmgs.c...Kalashnikov.htm). T(type) 1 AK-47- The Type 1 went into production in 1947. The T1 receiver had most of the elements seen in modern variants. It had a milled trunnion and butt stock insert, and a stamped body. Unfortunately the technology of the day could not produce a consistent product and a new, more robust milled receiver was designed T2 AK-47- The T2 with its newly designed milled receiver went into production in 1949, parallel to the existing T1, still in production. Not wanting to waste parts, it is standard practice for Russian made AK47s to contain parts from both models as it transitioned to a new design. Note the distinctive socketed "boot" connecting the stock to the receiver. T3 AK-47- Further refinements led to the T3, which went into production sometime in 1953 or 1954 and remained in production until about 1959. In the mid 1950s developement was underway to solve the warping problem encountered with the initial stamped receiver of the T1. The problem finally solved, in 1959 a stamped receiver AK47 was adopted by the Soviet military as the AKM (the Modernizirovanniy Avtomat Kalashnikova) which was a lighter weapon and easier to produce. (6.8 lbs vs the 9.3 lbs of the T3 milled receiver) So anyways, the T1-T3 are not commonly encountered on the wholesale market. Infact, the T1 & T2 never are, but the T3 pops up every now & then. In recent times the only available ones are the polish for ~$600 and the arsenal for I believe ~$2k. The difference? Not much, but I'll go over it. I wanted a historical AK but I was not ready to dump 2 grand into one unless it was something crazy awesome... so I settled on the polish. So what makes it ~$600? Well, a few things. First off, the lightening cuts were cut with an end mill and not a horizontal key-cutter. This is purely cosmetic, but it is not true to the originals. The original cuts had a little bit more of a radius on the ends of the cuts. You can see the right hand cut here, along with my krebs rear sight (which I swear by!). A little bit on a nice side benefit of the milled receiver is that since its made out of a solid block of 4340 steel, there are no nooks and crannies to clean in the rails etc. Its very "clean" on the inside & out. And check out the nice bolt & carrier, in the white and polished! Good job century! The piston is properly pinned loose onto the carrier and has the appropiate slop in it. Here you can see the other two historical inaccuracies with the rifle. There is a hole on the bottom of the trunnion for a rivet, which is of course not proper but this can be welded up. Also, the rifle was parkerized instead of gloss blued. Again, they made no functional difference but im picky like that And last but not least, the receiver is cut for double hook triggers as per the originals! A few notes on milled V stamped. They are heavier, although I honestly can NOT tell the difference! They are stronger (but in practice should make no difference) but the only noticable functional difference is it is noticably easier to clean. I got it for its historical nature, but its the BEST fitting AK style rifle I have EVER handled. It is so smooth, it beats every single other WASR, saiga, norinco, arsenal, waffen werks etc that have passed through my hands as far as mechanical fit goes. It shoots as good as it feels too!- Blazer Brass .45ACP
For the reloaders out there who may buy this for brass, it is small pistol primered brass so be aware. This does not effect non-reloaders so carry on- WASR 10 vs AK47
And besides, why bother doing it when you can get it done by someone else for cheaper? An Arsenal is a converted saiga, done by pros. You cannot build the equal to an arsenal for the same price or less, so why waste your time for a product that wont be the same fit & finish? Just an example...- Wadcutters as SD round?
Hollow base wadcutters are better than FMJ because while they probably wont expand (too slow) they cut the wound channel instead of just squeezing through, more blood loss as previously mentioned. Upside-down, I think in gellatin they dont penetrate enough, but I'de still say they are as good or a little better than a correctly facing one. The best would be a designated defense round, not just because it will be more effective but because the prosecution wont say you reloaded your rounds specifically to cause pain blah blah blah.- WASR 10 vs AK47
Correct, therfore your direct price comparison between the two is unfair. It would be like you having a geo metro, me having a civic. Then you say well the geo metro is better than the civic, because its cheaper and they both accomplish the same thing. Well sure they do accomplish the same thing just like a converted saiga & WASR do, but you get more for the $$$ with the civic and the WASR.- WASR 10 vs AK47
Apples and oranges. Dont forget, time is money. If I get an AK parts kit for $180 and a reciever flat for $20, then spend 12 hours building the AK, sure it only cost you $200, but it cost you time as well. And for $405 did you replace your gas block and front sight base as well? How about a rivet on retainer? Threaded muzzle with slant brake? I know none of that matters functionally but if you are going to compare them financially then you must compare them fairly. For $405 you did not get the same product, regardless if it matters or not to you.- WASR 10 vs AK47
Right here on our own boards: lol- Do I need a revolver?
The only condition is that it must be a S&W You can try my model 14-3 in Bridgewater if you would like. I also have a 1911 & a colt M1917- WASR 10 vs AK47
You dont make comments based on your preference of the saiga? lol ok. dont throw rocks from a glass house. And what about what I talk about is less "real" than what you talk about? /end pissing contest- WASR 10 vs AK47
I've posted my 2 cents a thousand times Saigas are too much time & money to get a good result. Bolt on handguard retainers and chopped off tangs for stock adaptors is not a good result. WASR-10s are much better than what most people think. The current crop of WASR-10s are quite reliable. They wont win any beauty contests, but they work. They are also set up perfectly for someone whom wants a traditional AK with the 45 degree gas block, proper furniture/gas tube, slant brake/nut etc. You only hear about bad guns on the internet, and with tens of thousands of WASRS out there theres bound to be bad ones. For someone who wants more quality than a WASR, you have gewehr works, waffen werks, the polish milled rifles by CAI, the older lancasters, SARs, arsenals, FEG, norinco etc. All of them are more cost effective then a saiga, require less work, and less money to get the same result. You can buy an arsenal cheaper than you can build a saiga to the same level, plus it takes no time... There, I brought facts. fire away- WASR 10 vs AK47
Thank you Sorry I had other things to do than check the thread all day long.- WASR 10 vs AK47
Saigas and WASRs arent all that is out there... Saigas are a poor choice WASRs are a better choice, but not near the best choice... All rifles & magazines are NJ legal...- When is a magazine not a magazine?
How many tools does the law say you need in order for something to be permenent?- Good quality .38 Special Revolver
Nope. Everybody has different guns for different reasons. I was speaking for myself, I dont need 40 guns for HD.... It depends what the OP wants to do with his gun, if he has no intention of ever using for anything but target work then my input on the 6" barrel is good. Adding some thought provoking content Yes, a 4" is more "rounded" as far as what it can do, but the 6" excels at the range - Considering trying trap shooting - starter shotgun