Everything posted by Pew Pew Plates
-
thinking about a shotgun
I dont know how you can have more than one loaded into the chamber with none in the chamber. Tube = magazine tube pipe = barrel. Such as, I keep 5 in the tube one in the pipe....
-
Thinking of a small .22lr pistol
Im not a huge fan of the P22s None have come close to the accuracy of the neos/buckmark/mkIII. Again, if its not accurate I dont see the point in a 22 pistol.
-
Chrono'd my loads! And pics!
Thats just where I want it, infact my previous load was even slower. The gun actually shoots about 3" high at 25 yards with that load and I've shot it at 100 yards and its still on a human sized target. 12 brinell is perfect for this speed and ~700 FPS is what bullseye shooters stride for
-
Chrono'd my loads! And pics!
Just chrono'd my reloads for my Glock 19 and S&W 1911 pro tonight. Just wondering how these look as far as consistancy? 1911. 200 grain SWC, 4 grains bullseye. 719 744 720 738 709 Avg: 726 FPS Glock. 124 grain JHP, 4 grains bullseye 1013 1007 1007 994 994 Avg: 1003 FPS Oh yeah, and any thread is useless without pics! Heres my 1911 and my 25 yard offhand target with the above load. Best target I've ever shot I think... pesky flyers. Howd I do?
-
Sen Lautenmummy to introduce bill to ban *high capacity* clips
No, I think its the shoulder thing that goes up. Lets make em illegal!
-
How do you get started with reloading?
I learned metalic reloading with 308, snipers hide being a big help along with manuals and google. Taught myself, no kabooms!
-
Thinking of a small .22lr pistol
I still dont see the appeal. Not good for target work, not good for defense (yes, better than nothing but...) I'de rather have a MKIII or neos
-
Saiga 7.62
red jacket sells the one I pictured for $999 ready to go
-
Saiga 7.62
Depends on how far you are going to convert. Vlad would have better numbers but it depends on what furniture you are getting, if your doing just the pistol grip conversion, or if your doing the whole front end too. Pistol grip only Full on conversion. Aside from pistol grip mods shown previously and obvisouly furniture style, this had the gas tube, gas block, and handguard retainer changed. Also cleaning rod was added. Muzzle threaded with a slant brake added (would have to be welded in NJ along with lug shaved)
-
Saiga 7.62
Thats the rifle people convert, yes. It will take standard double stack mags if you install a bullet guide into the rifle, which is cheap and easy to do. Just google "saiga bullet guide"
-
Thinking of a small .22lr pistol
I sent you an email. But long story short, the Taurus sucks. Plus, the fun thing about a .22 is very accurate target practise. You dont get the very accurate part with either of these. The other advantage of these is deep concealment for defense. Again, these suck because I wouldnt rely on a 22 if I had to. You can get a 380 pocket pistol which is barely any bigger. I know, I know, 22 will get the job done. I just wouldnt rely on it if I had the choice, thats all.
-
1911 Options - Smith? Sig? or Other...
Smith. I have the 1911 pro in .45 and love it. No problems. And if you ever had a problem, S&W cust. service is the BEST. Not that you will ever need it! If you are ever in the bridgewater area shoot me a PM and you can try it out.
-
Rugar lc9
Im the other way around. If im carrying, the trigger is shielded and I'm in 100% control of the firearm. If its in my nightstand with no safety, you grab it the wrong way and it goes boom because it wont be in the same spot same orientation every time. Chamber empty wouldnt be a consideration for me. Alas, I dont keep a loaded pistol kickin' around in my nightstand so meh
-
Show Us Your Bolt Action ,308's
Oof! 35mm! Yeah, that kinda sucks. Looks like ~$100 rings are what you are faced with.
-
Show Us Your Bolt Action ,308's
Hey, some constructive critisism: You will want to get your scope as low as the bore as possible. This will result in less elevation changes with you POI at varying ranges. Get the lowest set of rings you can from midway or someplace with a good return policy and if they dont fit just exchange for the next size up. If that doesnt fit then repeat. A lower scope will also result in better cheek weld. Oh yeah, and a high scope has more canting deflection(the effect of not holding the rifle perfectly upright). Gorgeous rifle, good luck with it!
-
Model 39 fte issues
So the shell is remaining in the chamber and the slide comes back, picks up another round and trys to stuff it in the back of the fired round? Could be a few things Broken extractor claw Dirty chamber Weak extractor tension Bad ammo I'de clean out your chamber real good, look at your extractor, and try some different ammo and see what happens. If that fails its probably extractor tension. How many rounds through the gun? Also, do you have a 39 or a 39-1 or 39-2? The 39 extractors are a PITA to find replacements for! If you have a 39, putting a round in the chamber and smashing the slide closed over it will do a number on your extractor.
-
shooting both .357 and .38 special in range session
Switching to jacketed 38s will have the same effect though. its not due to switching calibers.
-
Romantic Spark
Whew! I thought I was the only one!
-
shooting both .357 and .38 special in range session
tough extration makes sense but for the soot to crimp the bullet tighter you would have to be beating the rounds into the cylinder with a hammer, and at that point you should stop and think "wtf is going on". If you have ever crimped a pistol round with a moderate to heavy crimp you would know why im saying this. with a 16" handle for leverage you still need to lean into the press. To exceed that amount of force just by dropping the round into the cylinder is impossible.
-
shooting both .357 and .38 special in range session
While it may pose difficulties in extraction, going from 38 to 357 will not create pressure problems. That soot ring will be covered by the 357 brass, hence no bore constriction. Now, if your 38 rounds excessivly lead the bore, than its a different problem, but thats not due to switching to 357
-
What's in your range bag
Everything but the kitchen sink!
-
Evil Features
an AR doesnt have to have a pistol grip. Infact if you get one of these grips you can have your folding stock if you would like (if it fits) or another evil feature....
-
Evil Features
Just thinking out loud, but if the lower has no pistol grip on it yet, you can posess the collpasable stock on the lower. just pin it before installing your pistol grip. just speculation, but doing it that way you wouldnt have the 2 evil features on it.
-
Evil Features
Yeah, you can only have one evil feature in addition to detachable magazine. 2 or more is assault rifle. So if you have a pistol grip, you are maxed out. No threaded muzzle, no flash hider, no bayonet lug, no collapsable or folding stock etc
-
Bullet Hole vs Bayonne Pistol Range
We can have a team somerset county fish and game (Team bridgewater?) Between us we can guest in the opposing team Me Px4 storm j0n MrP