Everything posted by Pew Pew Plates
-
Cabela's Meetup, Sat. 1/29/2011
FYI the gun counter wait will be 2+ hours
-
G19 Gen4 trigger job???
#1 if you ever have to use the gun, you can bet your @ss that they will say you pre-meditated the shoot by putting on a evil hair trigger. #2 theres no safety on the glock(thank goodness!). The safety is its trigger. If you will be carrying it around, I wouldnt want a light trigger!
-
Brick Armory 11/9
why support BA? meh, should bring em to SCF&G
-
Blazer on sale at Palmetto
brown bear is better than the blazer aluminum. Aim surplus has it cheaper, too
-
PA CCW Laws in reference to a NJ resident carrying with FL CCW..
Be aware that while its legal to carry in philly, they apparently make up rules on the go even for PA residents with PA LTCF's. Also be aware that some people will say that you cannot carry in a school zone (not just school property but the whole 1,000' thing) because your license isnt from the state. Being in philly, everywhere is basically a school zone. You can always go with the hope that its interpreted that your license counts as a PA license as far as that law goes.
-
The Walking Dead
I cant believe im an azn now!
-
Ammo in Vehicle
temp doesnt reduce ammo longevity, it is significant temp changes.
-
This is a must have Item! Mall Ninja Special
There are alot of drawbacks (or just a lack of reason) behind those, but I see little bit of a scenario that it would help a bit. If you are carrying OWB with nothing but a light coat/parka/vest unzipped, wearing the badge just ahead of the pistol would be a nice way of dispelling panic if your coat swept back for any reason. Preventative maintenance per se. I've also heard one other person state that he wears it because if there was a shoot scenario and a cop is there before he can make his weapon safe, it will probably make the cop hesitate long enough to hopefully not shoot the "good" guy by accident. Just 2 points for it, although I'de rather not have it anyways. Just shedding some light
-
SXP or Double Defense or 887
If it had to be one of those 3, the winchester. Shoulda made a poll.
-
Eye sight and reloading
I'm nearsighted so thats not a problem for me. Except for when 9x18 brass sneaks into the 9x19
-
Lehigh Valley Sporting Clays tommorow 11/5
just google up "lehigh valley sporting clays"
-
Guy shoots himself with a Glock 18 17 Converted
Neither did I, but the guy said "Its on semi" and then reaches and clicks something. The selector is pretty low profile on those thats why you cant see it (Assuming I am right)
-
Lehigh Valley Sporting Clays tommorow 11/5
I hooped in two! MUAHAHA. come to the dark side nick, we have cookies (and free time!)
-
Guy shoots himself with a Glock 18 17 Converted
It has a selector switch so its either a legit conversion or an actual 18. Why do you doubt it? In america, dealers can get whats called a post sample. Cheap MGs, post 86 is possible this way too. Only downside is it is not transferable between individuals.
-
Lehigh Valley Sporting Clays tommorow 11/5
Hey, im just trolling for slackers lol
-
Lehigh Valley Sporting Clays tommorow 11/5
I'll be at LVSC tommorow with a friend approx 1:45-2pm if anyone wants to join. I can take a carpooler if they want to cram in the back of my vehicle, from bridgewater. PM me if you are interested!
-
So.... who wants to make this for me?
lol
-
build your own gun
7.62x54r krink
-
Corrosive Ammo -not good
Also, you cant just pour water over it, you got to brush/wipe the metal with it.
-
Which Economy 1911...
Dont cheap on a 1911. Ammo costs way more, and will always cost more. May as well make that ammo worth it and put it through a nicer gun. With the $900 ceiling you can get a S&W 1911 which is what I would suggest. I have the pro series which is a little higher up than your budget (1150) but its AWESOME. Plus, S&W has the best customer service out there, hands down. Not that you'll need it or anything, there guns are awesome.
-
Corrosive Ammo -not good
Since this turned into a how to clean thread, this is my procedure for AK type actions: Take rifle apart, including lower handguard. Clean bore as normal. Put rifle in slop sink, take stiff bristle brush and with hot soapy water, scrub the whole stripped reciever/barrel. Pay attention to the gas block and gas hole. Rinse, blow with compressed air. This is important. WD40 sucks. After you blow it out for what seems like an excessive amount, you lightly brush oil into the rifle with another brush (nothing takes oil like a good park job!). Grease rails. Clean bolt like normal. Shake it front to back. If firing pin rattles, its good. If not, punch out firing pin retaining pin and clean channel with pipe cleaners. Failure to do so can stick pin foward and lead to full auto/slam firing. Clean bolt carrier like normal also. Im anal retentive and polish the piston every time too. Thats optional lol. Gas tube: Put front end in hot water, wet the inside. Brush the crap out of it with a 12ga bore brush and rinse then dry. Brushing wont harm it, dont worry. Its a tube, not a precision cylinder like a garand. DONT OIL. brush whole thing over with oil and store. By the way, all this windex voodoo about nuetralizing salts is crap. I dont care if the salts are dead or not, I just want them removed. Hoppes wont make the salt less corrosive, but when you wipe them up onto a rag, they arent on the gun, thus, they will not rust the gun. Pretty simple really. Heres my nice and oiley SAR-2 (with blocked mag). I use cheap 3 in 1 oil for the outside. WD40 evaporates and gun oils expensive. Rubbing it with a rag wont do it, parked finishes are nice because you can really work oil into them. I take a bristle brush and work the oil into it. Goes from light matt gray to gloss black. This is important since you just worked all traces of oil out of the metal when you washed in the sink.
-
Corrosive Ammo -not good
Has to be. Nothing would make a rifle more prone to corroding without proper cleaning and nothing would make one batch of ammo more corrosive than the other.
-
Corrosive Ammo -not good
If you want to part with any of it cheap, I'll take it all! Seriously, I shoot corrosive 5.45 (used an entire crate so far), 8mm mauser, 7.62x54r, 7.62x25, and 30-06. Never had one speck of rust. I never used windex either, and never cleaned on the range. Something went wrong... BTW, AIM surplus has the 5.45 cheaper than what you paid, $119 per 1,080 if you get 2 tins (1 crate) incase you feel like buying more for some reason lol
-
Are M1 Garand...
To add to that, garands are legal in ANY configuration (unless you do some really wacky unheard of stuff) and the carbine is legal in NO configurations (as of now)
-
Guys & Guns
last ones from awhile ago, pretty damn funny. Also, pretty damn heavy. for teh lulz. Staph if you like guys and guns go/come to a WWII re-enactment. Complete gun&sausage fest