autoxnyc

Chatham here. Welcome to the forum.

Anyone know if they need any forms in addition to NJ standard ones?

I have been waiting a month for my permits to get renewed in West Orange, it seems the detective in charge can never be reached, either he will come back next Monday or he stepped out. By the time I get them back the 180 day period will be over! This permit thing is so pointless.

I carry my g19 when I go outside to put gas in the genny at night. Otherwise just keep a loaded mag in it and had it close by me most of the time. Also had my Mossberg 590 Ready to go in case I need more fire power.

Just got this link. Seems to be updated. http://mappler.net/gasstation/

Do they require separate gas lines from the street or can they tap off existing lines? I once heard new line need to be run from the supply line from the street and it can get expensive.

For some reason attaching the pdf didn't work.

Attached PDF shows stations still selling gas. 2 day old info now but anything helps. Also Hess has a link that's updated: http://hessexpress.com/FuelInformation HTH.

I tried siphoning gas from my car but it appears both my cars have some sort of baffle inside that prevents this.

Mecgar makes mags for a lot of guns, but to their spec. The 15 rounders are the Mecgar branded mags, not the OEM ones that comes with the 228/229 when you buy them. Before the M11-A1, there were never any flush fit Sig branded mags for the 228/229 9mm greater than 13 rounds.

The 9mm extension bumps the capacity from 13 to 17 rounds. not 15. Before the M11-A1, 228/229 9mm mags were 13 rounds. The only 15 rounders were after market mags. Mecgar makes a 15 rounder for the 228/229 9mm that fits flush. The difference is in the follower. The M11-A1 actually increased the internal dimension of the grip to that of the 40/357, so the 9mm mag has a 15rd capacity but it will not fit in 9mm 229 or 228.

The extension was for the 229 SCT model. the capacity was 17/14 for 9mm/40 cal.

228 and 229 9mm mags are interchangeable. M11-A1 15rd 9mm mags will not fit in 228 or 229 9mm produced so far.

I ordered one of these on the 6th. Just saw this thread and emailed Bryan and the buffer is on it's way! That's customer service!

Have you checked these? http://www.midwayusa.com/product/675243/choate-mark-5-conventional-buttstock-youth-11-3-4-length-of-pull-mossberg-500-600-synthetic-black LOP 11.75 http://www.midwayusa.com/product/169170/hogue-overmolded-stock-mossberg-500-12-length-of-pull-rubber-black LOP 12

I have the light LEM P30 that was converted by the factory (from regular LEM). I believe it's just a matter of replacing the trigger return spring and main spring, that's the difference between a light LEM and regular LEM on the HK45.

My buddy went through PTI for something stupid in college. The arrest record did show when he applied for his FID. He applied for Global Entry at the airport and it also shows. They asked him about the arrest both times but passed without issues. When employers do a bg check nothing shows. He was told it gets expunged after 6 mo when the attorney applied for the PTI, but the arrest records are still there after 13 years. I wonder if he can get the record sealed so even the arrest record does not show.

A number of shops does transfers for $25 + NICS.

For range use you can just use the polymer moon clips. You don't need a tool for those and they are dirt cheap.

Welcome to the forum neighbor

Groups will not tighten up going from a 4" barrel to a 5" barrel. You gain velocity but not accuracy. You do get more practical accuracy if the sight radius is longer. Either way any Glock will be more accrate than majority of us. You will not see any difference shooting it off hand. If you go with the after market barrel of identical length you'll actually lose velocity because the Glock rifling gives a better seal than traditional rifling.

Yes it will work fine but why the longer barrel without the benefit of a longer slide to increase sight radius? Do you need the extra velocity?

Nice looking 03A3. Question, From a collectors perspective is SC more desirable than Remington?

Thanks for the info guys. Special thanks to Parker for the comprehensive info.

Like others have mentioned you can't really improve the DAK a whole lot. If this is not your carry/HD gun, swap out the main spring for a lighter one. Put in a snap cap and dry fire it 100x a day for a while and that'll smooth out the action