Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

autoxnyc

Members
  • Joined

  • Last visited

Everything posted by autoxnyc

  1. Colt by far the best here. Bushy is ok but not made like the Colt. for example, Bushmaster is not parked under the FSB. every little detail counts.
  2. autoxnyc replied to Controlled Pair's topic in AR Discussion
    I have a LWRC 5.45x39 upper and never had any issues with it and I see no indication of carrier tilt. It's awesome especially when shooting the dirty corrosive ammo. That thread on m4carbine.net only had one or two guys claiming to have experienced or heard someone else experience issues. I don't see anything conclusive about issues with LWRC. There are always pissing matches between users of these brands anyway. I've seen a lot of talk re. POF vs LWRC. Cons of Piston vs DI is not really an "issue". I do think it is overpriced, but so are KAC and Noveske.. and if you think that's overpriced, take a look at HK's version of piston ARs
  3. Well, for grip safeties, there's difference in fitting it for it to work and blending it so that all the lines and radious line up. If you want it to look pretty then you should have a gunsmith do it. Otherwise you'll have an not so pretty gap.
  4. Beautiful rifle!
  5. Didn't update anything in 2011 Arms Race Thread so I guess I'll start again in 2012. Used 30 day exemption form for the first time. Picked up the following handguns this month, although some were sitting in the FFL safe for a while. Walther P38 AC 42 Walther P38 CYQ 45 Walther PPQ CZ 75B Polished Stainless HK P30 V1 (light LEM) long guns: 1903A3 Remington 43 1903A3 Remington 42
  6. The hammer should be drop in but you might need to stone it for a good pull since your sear might be mated to the original hammer already from firing the gun. You might as well just get a hammer/sear set from Cylinder/Slide and it should give you a decent pull just from dropping everything in. The beavertail will need a lot of fitting work for it to look decent.
  7. If someone was arrested and the charges were dropped the arrest record still shows up on a background check? I was told the records goes away after a number of years or gets expunged automatically.
  8. I've been following thread and decided to share my experience at the BH. I used to only go to BH before I found this forum. To me they were the only range and gun shop around. Another option was Rahway but their price was always higher. My very first firearms transfer after I got my FID and permit to purchase was for 2 handguns totaling $3000 in value. They charged me sales tax on that and it was not chunk change. I was confused but being my first transfer I didn't know better and paid the tax. When asked their response was "blame Corzine". Now I am still unsure if this was ever a law but I have never been charged tax anywhere after that including BH. That really left a sour taste in my mouth. The staff..... I always had very good experience with the owner, he's a top notch guy and always patient and helpful. He even gave me pretty good discounts once in a while after I became a regular. I also had overall good experience with the ladies there, they are always very nice. The owner's son however, never gave any breaks and always charge me max on transfers, Their price was $50 per gun + NICS + tax. Once I was getting 2 mosins and the transfer fee was almost as much as the rifles after tax. Not to say he did anything wrong but I simply took my business somewhere else after getting to know other dealers through this forum. I couldn't be happier doing my transfers at Hackettstown G&A. Half the price and always received quick service. I don't think it was very wise of the son not giving me ANY breaks since the owner always did. I do a lot of transfers and he simply lost the business. I will still go there if I want something right now since they seem to have very well stocked inventory. Their price is OK but are not very flexible(unless I deal directly with the owner). As far as the range there. Yes the older RO can be a real AHole. I know he's trying to do his job but you dont' have to be screaming at the customers when you try to get your point across or be sarcastic. After he knows you he'll back off a bit but like others have said every once in a while he'll be having a bad day and be extra rude. All the other ROs are very nice and never gave me any problems. I can only go to the range on weekends so we all know how bad it could get over there. You can't really blame them since they are the only range around and space is limited. I now simply drive to Easton Fish and Game to shoot. They way I look at it, I pay $30 a year for membership for 25yard pistol range/100 yard rifle range. Yes it's a bit further but if you factor in the wait time at BH it comes out to be about the same! I don't have to wait for a port cramped in a room with 10 guys next to me and it has a real rifle range. In conclusion, BH is not bad if you go during the week when people are at work. If you know what to expect from the older RO then it's a convenient for people around there to get some range time. I don't know if anything will improve there any time soon. I don't see any real competition anywhere close to them and at least on weekends there's more customers than they can handle so it's not like they are losing any by keeping things the same.
  9. Isn't careless driving a 2pt violation? Normally they'll plead bargain no matter what and give you a no point violation. There's really no point in hiring a lawyer. You'll end up paying more. Just show up in court and talk to the prosecutor before hand and they will normally offer you a no point violation to plead guilty to. You'll have to pay a surcharge but they already got it figured out... It'll be slightly less than hiring a lawyer. And if you do, likely they'll do the same thing.
  10. I dont' think they really expected to win in NJ. This has to go to SCOTUS just like the McDonald case. Not sure how long it'll take to reach there though.
  11. autoxnyc replied to bry@n's topic in Handguns
    Isn't that just a chopped down 229? That's gonna be kinda thick no? I think the 938 will be sweet though.
  12. It's not too hard to do that no a 1911. I've done that myself as well as doing a trigger job to improve the pull on my Les Baer. Just takes basic understanding and patience and the right tools (actually for the safety you really only need a file). The 1911 actually is easier to work on than Sigs.
  13. Next best thing to Glock is Walther PPQ
  14. Go with a all metal Kahr. They have the nicest DAO trigger I have tried for a semi.
  15. You can still use rifle length rail on these but with one piece forend I believe the FSB has to come off to install one.
  16. Do you have any experience with Palmetto State and their products? Are they on par with Spikes/BCM?. I want to build a dissipator but never found the upper I liked but this one seems to fit the bill. thanks!
  17. I just looked at their site. For some reason they have a lot less upper to choose from now. They do sell a complete dissy rifle. http://cmmginc.secure-mall.com/item/CMMG-16-inch-Hammer-Forged-M10M-1778 You can call to see if they still sell a dissy upper. The only other company I know of that sold dissy uppers were ADCO and Bushmaster.
  18. I think CMMG makes one. You can get it in either mid or carbine length gas system I think.
  19. Here's one on GB. You can get an idea how much they go for. This one is NOT all matching (front band does not match) and does not have the dust shield. http://www.gunbroker...?Item=265586815
  20. That's a Type 38 Carbine. The Kanji characters below the mum says "three eight type". Shoots 6.5 Jap. Mum looks intact. Carbines are a lot more rare than rifles. If all numbers match including the dust shield then it's worth a lot.
  21. From my experience. 226 grip feels slimmer in hand than the 229. Old carbon slide guns 226/228 balances better than 229. 229 is not much smaller than the 226, the slide is slightly shorter and the so is the grip.
  22. Anyone looking to get a 1911 VM2 they just came back in stock at Top Gun Supply today. So far all lengths are still in stock.
  23. Where can I find a copy of that? My new town requires their own form and I'd like to show them this statute. thanks!
  24. autoxnyc replied to TheWombat's topic in Handguns
    Try this link: http://www.gunsameri...99-gun-reviews/ Just got the PPQ myself this past weekend. Didn't get a chance to live fire it yet but from dry firing the trigger is lighter than any of my Glocks. The reset is short but I think it's over hyped. It's on par with a Sig with SRT. It is very light so I think it'll be a good candidate for carry.
  25. 4K is a lot. I wouldn't pay more than 2k for a top of the line MBP. With discount it should be less. Don't get any upgrades from Apple directly. RAM and HDD are much cheaper else where. Upgrading the drive is really easy on a MBP.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.