Everything posted by autoxnyc
-
"that Guy" Yeah, I Found Him
So we don't need any paperwork. It's up to the state to prove the gun is illegally obtained. Correct?
-
"that Guy" Yeah, I Found Him
What if you bought the gun a long time ago from another person when you lived in a different state where paperwork is not needed? Isn't there at statue of limitation for this?
-
Nypd Brass To Cops: Stop Using Kahr K-9 Semi-Automatic Pistol As An Off-Duty
How can they complain about a 7+lb trigger on a DAO gun? That's a pretty long pull to have an AD!
-
Sig Sauer .22 Rimfire Conversion Kits
OK now I remember. I did get only the follower from this guy and purchased extra stock mags to mod using his upgrade parts. They made the kit so much better. Although the price was a little steep IMO.
-
Sig Sauer .22 Rimfire Conversion Kits
Yes.. that's essentially what it is. followers that protrudes enough to get in the way of the lower part of the breech on it's way back to battery. Unfortunately they only sell the mags altogether when I was looking for those.
-
Keeping Track Of Rounds Fired
When you go to the range, separate the ammo you will use in each gun. You can use the box the ammo came in or just use zip lock bags. This way you know exactly how many rounds you used for each gun after the session. I use the spreadsheet in google docs to keep track. This way it will always be there no matter which computer you are on and you can update it whenever wherever.
-
Sig Sauer .22 Rimfire Conversion Kits
The stock plastic guide rod is crap and probably contributed to most of the issues. I upgraded mine to SS and it has been 100%. Also don't dry fire the gun with this kit on since the firing pin will peen a slot in the upper area at the rear of the chamber face. This will cause a high spot and will cause FTF issues. I don't know if Sig have addressed this issue recently. The 22 kit also does not lock back after last shot and you'll always drop the hammer on an empty chamber unless you always count your rounds. There are mags out there that will allow the slide to be "locked" back on the last shot. Always use high velocity 22s. Mine has been running 100% with CCI Mini-Mags.
-
Are These People For Real?
Where can you sell cats? I have 3 old ones laying around, I guess for 40 each ti's not a bad deal. I can trade them for a few boxes of ammo
-
Are These People For Real?
Probably easier to steal them from SUVs due to higher ground clearance. The location is also different from model to model so probably the Pilot cat is easily accessible and easy to take off.
-
Reason On Multibple Hg Exemption Form
So after I use the 3 permits for the exemption, I'll have to wait 30 days for the next non exempt purchase? I thought the purchase from the exemption does not affect the "regular" purchases and the next non-exempt purchase just has to be 30 days after the prior non-exempt one.
-
Reason On Multibple Hg Exemption Form
Well I expect to wait around 3 weeks to have this done. I'm getting 3 handguns so if I go the normal route it'll take me 2 months from the first one to last one if I don't skip any days. I can still purchase others handgun on my normal 30 day schedule independent of these 3 guns.
-
Reason On Multibple Hg Exemption Form
Is "To further enhance my firearms collection" good enough reason to put on the exception form? thanks in advance!
-
Possible Business Idea, Would You Be Interested?
I'm not an expert on business in general but I think you'd want to create a LLC for each book.
-
Cz75B Decocking
Walt confirmed it was polished ss. Anyone here had work done at the CZ custom shop? I wonder if I just get a regular trigger job or should I go for the SA/DA Comp hammer as well.
-
Cz75B Decocking
The asking price is the MSRP of the polished stainless. So I'm sure it's a stainless. I do like the polished look. The nickle version has a lower MSRP. I'm double checking with Walt though. Thanks for the heads up. Once I felt this CZ I think it's not gonna be the only one I'll get one of those custom shop comp guns later. I do want to send this one to the CS to get a trigger job done.
-
Cz75B Decocking
Yes I would have gotten the BD but they don't make that in stainless yet I wanted the bling haha.. Thanks guys.
-
Cz75B Decocking
Put a deposit down on a CZ 75B stainless today at Hacketstown G&A. The stainless finish is quite attractive and the stock trigger pull is pretty decent. One question, what was CZ thinking when designed a double action semi with no decocker? It has a safety so the gun might as well be SA. How do you safely decock a CZ 75B? I guess lower the hammer and make sure part of my finger is in front of the hammer? Anyone shooting one in USPSA and have any good advise on safely lowering the hammer on a 75B?
-
Macbook Pro Vs. Macbook Air
Not disagreeing but the OP intended to get a computer for his family and stated his parents are not too tech-savy. You can install programs on a PC that'll block most Virus/malware but you'll still get a spyware here and there. Not a big issue but you don't have to worry about it AT ALL with a MAC. You don't even need to install a program to block them or worry about keeping the definition up to date and/or paying for subscriptions. I handed my parents an iMac 3 years ago and I never had to fix any spyware related issue for them after that. Before that I constantly had to fix and scan their computer for them even with internet security/virus suites. It is the sites they visit frequently that always leaves some sort of Spyware on their PC. Yes if you know what you are doing it all can be prevented but for people who are not tech savy Mac OSX is better in that regard.
-
22Lr Ammo For Hd/ccw
CCI Mini Mag solid nose. Never had one issue with that round and pretty potent as far as 22LR goes.
- Any Watch Fans? What Do You Own? What Do You Like
-
Time Period You Guys Have Been Seeing...
I sent in application on 10/26/2011 at West Orange PD for: 1 Replacement FPID 5 P2P, (already have 6 from Sept 2011 but realized I cannot find my FPID) Called last Thursday 12/1 to check on them. They said they have the approval in hand and need to type up the permits and have the chief sign them. 12/8/2011 - Got a call today and the officer said my permits are ready. I asked him what about my FPID and he said: "what FPID?" So apparently they forgot about the FPID. Luckily since they had the approval from the state they just need to type up a FPID. Overall 6 weeks which is slower than my usual request for additional permits.
-
Firearm Purchasing Requirements as it applies to NJ Resident
You don't need a FPID and only a P2P to purchase a handgun? Damn all this time I was waiting for my replacement FPID I could have picked up a PPQ! Damn NJ!
-
Macbook Pro Vs. Macbook Air
They are out there but from owning MACs for 4 plus years I have NEVER caught any of them. I don't personally know ANY friend of mine with MAC that caught any of them. However, every single PC of mine has at least some SPYware and they all slow down after a while. This applies to most PCs out there. Most people who have owned both likes MACs better. Yes they cost more but you do get what you pay for. If a Macbook breaks you can bring it to your the local Apple store and they will fix it within a day or two. For the OP it's at Shorthills mall which is 10 min away. HP and Dell laptops you'll have to mail them back or pay extra for in home service.
- Macbook Pro Vs. Macbook Air
-
Macbook Pro Vs. Macbook Air
I've built plenty of my own PCs before and have both PC and Macs at home. Hardware aside, you will not have issues like Spyware/Virus and slowdown because of the OS and the 2 things mentioned before on the OSX. You can find deals on the Air for around 800 - 900. A decent deal for something that'll give you easily 2 to 3 years of service without slow downs/virus problems. iMacs are really nice too if you only use at home. You will not have to deal with a million wires like PCs. AND. When you are done with it, you can sell a used MAC for A LOT more money than a used PC(worthless).