Everything posted by mipafox
-
4 X 5 Kodachromes
Wow. Some of those pics are stunning. I think I have seen a couple of them before. I work in some places that haven't changed one bit since those photos were taken.
-
AR15 cleaning
ARs are like bachelor apartments. You only clean them when you are getting rid of it Well, thats not exactly true in either case of course (I hope)
-
AR15 cleaning
You are not going to damage your firearms by overcleaning them - that stuff only happens in the Military, where they have to be made spotless on a regular basis for no particular reason.* And GIs and Marines use some unfriendly methods to try to get that job done in the shortest period of time. You like cleaning, clean away. If you don't know what you are doing, or you don't know your weapon, you are definitely safer cleaning it more than cleaning it less. It's just that ARs shooting brass case non-corrosive ammo under friendly stateside range conditions are not going to need cleaning to be reliable. If you look inside and you see a bunch of crap or something wrong I would certainly recommend addressing it. And keep it wet. *However, we know that excessive barrel cleaning can reduce service life depending on how it is done and there is the potential for slight loss of accuracy through crown damage.
-
Bolt not locking back after last round fired
I understand. No, XM ammo is not rejects, or ammo that was found lacking in some way, and most of it would probably pass mil-spec inspection. It may contain pull-down components, and some of it might not pass mil-spec inspection. But it is not ammo that was set aside for missing spec.
-
Bolt not locking back after last round fired
Do you know how old that comment is? Lake City doesn't even make any M193. Despite the fact that the comment is so old, I think the guy made it clear he didn't even know exactly what he was talking about. There have been dozens of comments from Winchester (back when they ran it), Federal, ATK, and Lake City on what XM ammo is and is not. Not all of the answers have been 100% consistent, but most of them have been pretty close to what I said: 1. The ammo is not rejects - that's impossible, they make way too much of it for it all to be rejects. 2. XM193 can't be all rejects - Lake City doesn't make any M193 anymore. They have no military contracts for 55 grain ammo. 3. Some of it may contain pull-downs from off-spec production that wasn't accepted by the military.
-
Bolt not locking back after last round fired
Your gun isn't short-stroking on full-power military 5.56. If it was, I would strongly suggest NOT betting your life on .223 ammo.
-
Bolt not locking back after last round fired
IMI is not rejects. It's military ammo. It's better than US Military ammo. The reason US ammo is "XM" is because it is illegal to sell US Military surplus ammo (Thanks Clinton!!!). The "X" does NOT denote rejected ammo. It's just made specifically for the civilian market. If it was all rejects, then Lake City would have double digit failure rate in their production. They produce way too much XM ammo for it to be rejects. Heck, Lake City doesn't even make ANY M193 anymore (Israel does), so there is no way there XM193 is exclusively rejects. A small portion of the ammo was probably made from pulldown components that failed mil spec for minor reasons. But certainly not the majority of it. There was a time when Lake City was producing hardly any XM855 for the civilian market back in the early 2000s and a lot of the "XM855PD" did indeed look like it had a high percentage of rejects. Those days are long past.
-
Bolt not locking back after last round fired
IMI is not weak, it has a good mil-spec reputation. Probably your gun barely slipped the BCM gas spec. Try the buffer. Don't leave it loaded with .223 for home defense, use 5.56. You could also call BCM and tell them you want to swap the upper.
-
Is gun ownership on the decline?
Yes, it provides $1.5 million for a House run and $5 million for Senate run. BTW - that's not a joke (although I pulled the numbers out of my rear). Obamacare gives billions of dollars to expand semi-political leftist organizations in voting campaigns as part of "community outreach." You won't believe how much money will be spent in the 2016 election. And most of it will be taxpayer money spent by the government.
-
Bolt not locking back after last round fired
Thank you!!! I've been shouting this from the rooftops for a couple years and people always shout me down and tell me there is nothing to be said about BCM. Where did you hear this? It's short stroking. BCMs are undergassed in my personal opinion. They say they are "optimized" for military ammo. It makes them a lot of fun to shoot, but if anything goes wrong I expect they will go down. Consider the buffer change (makes sense but I have no personal experience).
-
Issues getting on njgf? Anyone else?
I missed High Exposure second mostest
-
NJ.com Poll - Here we go again.
Someone is on vacation, you need to do it.
-
who's best in cd12
In Jersey it's worse. Many "Libertarian" "candidates" are PAID Democrat plants. The Jon Runyan race comes to mind. Please don't take this to mean that I am a big R party guy or suspicious of Libertarians. It's just the way the Dems roll, always have to be careful when voting 3rd party.
-
RIP Bill "Wild Bill" Guarnere Easy Co.
Holy crap. That's a heck of a memory. Some people never stop giving.
-
RIP Bill "Wild Bill" Guarnere Easy Co.
Rest in Peace. Prayers sent to him and his family. He was at Forks a lot. I met him and thanked him for his service. I didn't talk to him much because I'm really apprehensive about approaching famous people. It's just awkward to me to start talking to a person that doesn't know me and has probably heard the same questions a thousand times. But he seemed to enjoy it, representing his unit no doubt, and he got a lot of well-deserved attention from several generations of thankful Americans.
-
pocket 9mm's which one and why? for under $600
I don't pocket carry but I need to start. Is the Walther small enough to fill the roll of a pocket gun? Because that thing shoots like a full-size 1911 (slight exaggeration). Checko just educated me they come with standard mag release option now.
-
AR15 cleaning
Are you referring to the tail of the bolt? I have probably 5,000 rounds in automatic fire on one of my bolts without cleaning the carbon off the tail. Or cleaning anything off of anywhere for that matter. And I don't plan on cleaning the bolt tail ever again, it's just that I only fire several thousand rounds a year lately and they are distributed amongst several uppers. So it takes me a couple years to get 5K on one of them. If you have something weird going on and are getting carbon on the bolt face, or in the chamber, or the bolt doesn't move freely in the carrier (when lubed), then you'll have to clean those areas and also figure out why it is happening. Because it shouldn't be happening, at least with US ammo.
-
Is gun ownership on the decline?
Mostly Lehigh Valley, but the entire eastern half of PA. From the Poconos to Philly, State College to Lancaster and Harrisburg, to the Maryland and WV border areas. I usually don't OC when I travel outside the Commonwealth unless it's rural activity.
-
How to trade guns without getting ripped off?
If it's worth it, then go FTF, go armed, bring an armed friend. If you're trying to save $50 and you don't trust the guy, spend the $50 and buy local.
-
AR15 cleaning
Cleaning it doesn't accomplish anything, so efficiency is irrelevant. Inspecting it does. I'm not going to learn anything new about ARs by cleaning them that I didn't learn the first thousand times I cleaned them back when I was an idiot.
-
AR15 cleaning
Maybe once a year. Maybe not After I shoot it lube it. If I see lots of metal shavings and crap in the barrel extension I'll swab them out with a Q-tip, and sometimes I'll use a second one to swab the gunk out of the charging handle/gas key slot in the upper. Inspect the bolt face and bolt. Inspect the chamber (chrome lined) - if it's discolored it needs cleaning. I shoot brass ammo so that never happens. Look in the lower and make sure nothing is wearing out and no broken spring legs. More important to look at it and lube it than to clean it.
-
Is gun ownership on the decline?
I Open Carry most of the time. On two occasions I had women ask me about it in public because they were considering carrying a handgun for protection. Well, I have one of those milk-crate file boxes in my trunk and I keep a few sets of License to Carry Firearms (LTCF) applications along with printouts of directions to the Sheriff's office and hours, and URLs of websites for information on firearms and training. Both of them got their LTCF (I actually ran into them fairly often). I got one of my friends to get his LTCF and I'm sure that resulted in his two sons getting them since one is .mil and they are a casual gun owning household. Those are the only ones I remember that I know for sure but so many people have asked me about carry and how it works that I'm sure I inspired others to get LTCF.
-
Basic Shooting Skills - making the most of range time
That is absolutely awesome. That is the coolest thing I have seen in a long time. What is the difference in cost? It looks like the cheaper ones are slightly lighter and have weaker lasers. Do you have experience or recommendations on the different models?
-
Picture of the completed collection
I thought I was going to see my first completed gun collection. Boy was I wrong. BTW - you need a shotgun just to call it a start. Lots of nice grips, though, I like your taste!
-
Issues with getting to NJGF
You are OK