Everything posted by MidwestPX
-
7.62 rails
Personally, I'm a huge fan of the Centurion CMR. It's light, strong, modular, and uses a barrel nut that doesn't require indexing.
-
Site is temporarily down
Progress is being made. The new store is "up" but inaccessible by anyone but the devs (intentionally). Devs are working on optimization of themes, debugging plugins, and PCI compliance. After which, we'll start re-populating the catalog. Maybe two more weeks?
-
Strike Industries +5 PMAG base pad
That's because Magpul's using a 20rd spring in the 10rd mags. They're also using 30rd springs in the 20rd mags. Higher tension translates to more reliable feeding is what I've read/heard.
-
whats YOUR perfect recipe for 308 for accuracy and PUNCH !!!
Work up a load for your rifle(s). I differentiate my loads because some aren't safe for my M1A. For instance, my general purpose 155gr AMAX load is sub-MOA but works well in all of my gas guns but the M1A. It's generating enough pressure that I stand to break or bend the op rod. My plinking .308 is all middle of the road and works well in all of my guns. But it takes time and effort to do the load development.
-
Strike Industries +5 PMAG base pad
Haha, I'm just as anxious about it, brother. Lots of late nights and phone conferences. The catalog should be getting populated within the next week or so and graphics are being ironed out. I'm not pushing my contractors very hard since I use US personnel and it's the holiday season so I don't want them losing time with family. I have an entire wholesale side of the business which is chugging along very well so I promise we aren't over here sitting on our thumbs
-
Strike Industries +5 PMAG base pad
Truth be told, we have more than just the host mag and limiter as inputs in the mags we make. $12K ultrasonic welder which just cost an extra $1k this year because the titanium horns needed to be re-cut plus insurance, overhead, etc. I know relative to a normal PMAG, $20-21 seems like a lot but no one's getting rich making compliance products. As evidenced by the fact that I drive a Toyota Highlander and not the BMW 535xi I want
-
Armslist marketing genius
"ecomical" for sure
-
80% Lowers in New Jersey?
It's for your own good. Simmer down, subject.
-
Anyone Run An H2 Buffer
Perhaps the non-metallic spacers between the weights was forgotten? I run an H2 in my suppressed SBR but most everything else gets an H buffer but none of them have what I would consider to be excessive noise.
-
Site is temporarily down
I just got back in to the office after a five day machine gun and suppressor demonstration (and pig hunt). For the time being, no, we are not taking retail orders. I'm happy to help you locate the mags you are interested in at a local dealer or check out www.joeboboutfitters.com as they stock most of what we make.
-
Suspicious device found on NJ Transit bus
Dammit, I came in here to post this!
-
Gov't 20" questions
Rifle length gas system and heavier rifle buffer make it a very soft shooter.
-
Purcase Guns at Dealer Cost
"Cost" is a funny term to throw around. There are varying levels of cost depending on the size of your business and who you know. As far as I can tell, there are the following: 1. Buying through distribution. Highest cost and can vary from one distributor to another. 2. Buying through a buying group. This can add quite a few points to margin depending on manufacturer and/or SKU. 3. Buying direct. Sometimes the same as a buying group, other times, better. And I've seen in some rare cases, worse. Additionally, there are stocking dealer programs that can be profitable if you can get the free guns. So typically when someone says "cost," I take it with a grain of salt
-
What did you take to the range most recently?
The store is being shut down for a few days while I head down to TX to demonstrate some machine guns and suppressors. I'm extending my stay by a couple days since the retail store is down and going on holiday, specifically, a hog hunt with some friends on a private ranch as well as getting some clay pigeon blasting in. I ran out of space in my checked luggage so I shipped the Mk46 earlier in the week along with ammo, drums, and other supporting gear. If it wasn't a 14 hour drive each way, I would have loaded up my Highlander but I'm getting too old to drive that much
-
1x variable scopes.
It's not visible. Not ideal as it's at the rear of the vehicle but seeing as I also conceal at least one pistol on me at all times, my thinking is should I need it, the handgun(s) will get me to it. Photos are from when I was using a .308 AR but I got tired of trying to get it to run both AP and 155gr AMAX and swapped it out for the SCAR and added a bag with four spare mags of AMAX and two mags of AP along with an IFAK. And yes, that's a machete that I also keep in my vehicle because sometimes, the places I take that thing result in me needing a machete to walk around
-
1x variable scopes.
Should've taken the EOTech off The fixed 3.5x is surprising workable. I noticed with my variables that they're either on 1x or max. They're almost never in the middle. So I tried the ACOG as an experiment and found that it works pretty well. Am I as fast as I am with a RDS at contact distances? No but I'm still fast enough in my opinion. But for anything beyond that, I have the magnification for target ID and I don't have to fiddle with the optic which is handy.
-
1x variable scopes.
Red dots are more forgiving of imperfect cheek welds and positions. That being said, my SPR which serves as my outdoor do-all rifle has a 1-8.5 FFP on it. My SCAR 17 which is in my vehicle at all times has an ACOG on it (fixed 3.5x) which I find to be a good compromise. My SBRs ALL sport Aimpoint M2 or Pro red dots though.
-
Double Feed Issue - Issue Caused by Paint Interior?
I'll second/third the recommendations to try different mags and a different BCG, preferable mags and a BCG known to work properly in another rifle. If a different mag resolves the problem, try the Hex Mags in a different rifle and see if you can replicate the issue. Same for the BCG. If a BCG swap has the rifle running right, try the original BCG in a rifle that runs properly and see what happens. Double/triple feeds in my experience almost always trace back to either the mags or the BCG.
-
USG Sues L3 for Fraud over EOTech issues
Source is LAV's FB page: https://www.facebook.com/LarryVickers/photos/a.10151236579360416.800876.295755495415/10156285737345416/?type=3&theater
-
Anti-Gun Pediatrician's Visit
My wife's a pediatrician. They're not all bad. She asks about guns in the same breath as swimming pools and household chemicals because they have the potential to be dangerous to a curious toddler/child.
-
Site is temporarily down
Yep. You can believe that we won't be hosting with them any longer. But, through all the bad things that have happened with the site being down (and now gone) and my dad passing (cancer so we saw it coming and I spent the last month caring for him full time and working PX at night), I realize that I still have so much more than so many people. And I'm thankful for it. I have a warm house, a full table, and a loving family. It's sappy and cliche as all Hell but it's true. Adversity like this made me reflect on my life and what I have rather than focus on what I've lost. I'm down but not out.
-
Site is temporarily down
I just updated the splash page but the news is not good. Today was the first day we had access to any of the data but a quick survey and some back and forth with the host's support personnel yielded, well, bad news.
-
Site is temporarily down
Thanks, guys. He's a big part of why PX exists.
-
Site is temporarily down
Yes, I am well aware of how bad this is. But honestly, I have bigger things to deal with right now with the passing of my dad. When it rains, it pours.
-
Site is temporarily down
Quick update but it looks like the host has gotten everything transitioned. However, there was some data loss though it's unknown if PX was affected or not. Thankfully, the database servers were not affected so if there was any impact to the store, it would be limited to the software that drives the store, not the data such as order histories. This is something our contractors will be looking at as soon as possible. No ETA for when the online store will be running again but know that it will be back as soon as possible.