MidwestPX

M&P Pro 9mm AAC Ti-RANT Storm Lake threaded barrel Apex DCAEK Streamlight TLR1 147gr Federal HST +p I need to run these over a chronograph as Federal lists a muzzle velocity of 1050fps out of a 4" barrel. I'm praying they stay subsonic... The front sight is at the same height as the top edge of the can so shooting through the can shouldn't be an issue. Can't wait to do some low/no light drills with this setup.

Yes but many, myself included, still download them because when executing a tactical reload, it's still tough with a full 30rd PMAG. I run 28 in mine and just about everyone in the classes I attend do the same (some run 29).

If you want to save $20, get a LMT BCG instead of the DD. They're more or less the same thing.

The BCM handles are great as they solve one of the two common failure points with charging handles; the latch roll pin. This is a common failure point due to stress being placed on it when the handle is manipulated. The other common failure mode is a bent handle and BCMs still bend (saw one happen in class last weekend). The larger latches are also great for easier manipulation.

You're not being singled out, I promise. My processor, and they can't give me a reason, won't process certain Visa cards through the gateway though if I put them through manually using the virtual terminal, no issues. I'm in the process of getting a new version of the store running with alot more functionality and when I do, the processor will also change and I'm hoping the new gateway won't have that issue.

Thanks! I'm always expanding the catalog though the last couple months have been focused on a Title II push.

Things will get better. Part of the drought is due to their expansion from an 8000 sq. ft. facility to 32000 sq. ft. Paul and his crew will be pumping uppers out as fast as their suppliers can get them parts

Holy crap. I paid $3.84 for premium on my way back from my EAG class and thought that was bad...

Please welcome Rainier Arms as the newest dealer of limited capacity PMAGs made by Midwest PX. Please call 877.556.4867 for availability and pricing. I've shipped 10rd PMAGs to them however oddly enough, a fair number of 10rd PMAGs go to NJ so if you're looking for some, Rainier has some

Or won't lock back on an empty mag. It's a good idea however Mega's yet-to-be released lower that incorporates a bolt catch manipulation into the magazine release button will pretty much make the BAD lever moot.

Here's a technique to clean a pinned PMAG given to me by a customer. 1. Fill two basins with water, one soapy, one not. 2. Dunk the PMAG in the soapy water and while depressing the follower with your finger, swish it around 3. Flip the PMAG upside down over the soapy water and while depressing the follower with your finger, allow it to drain 4. Repeat #2 but in the clean water 5. If you so desire, squirt CLP in the mag if you're concerned about spring corrosion

I love slick-side uppers. If you can find a non-scalloped carrier to go with it, you'd have a rare build indeed. Honestly, the forward assist is useless IMO. If you have a failure to go into battery, it's better to just rack the charging handle a second time rather than push the FA, look to see if it's gone into battery, if not, push the FA again, etc. If you need a forward assist, use the one Stoner designed into the carrier and move the carrier with your thumb.

My second time through this class as I was part of the pilot group that took the first class held six months ago. This is different from the Carbine Operator Course in that it involves two nights of low/no light shooting. If you haven't shot at night, I highly suggest getting some training as I know alot of us keep guns by the bed in case someone comes knocking unexpected and unwelcome during the night. Unfortunately, Pat was unable to lead the class however Mike/Mr. Grumpy did a phenomenal job. I don't feel I lost anything by having Mike as my instructor rather than Pat. Class was a small mix of the usual suspects. This was the first class for two of the shooters, my second and the umpteenth for Steve of Triad Tactical and Doc. Good group of students, no issues that I saw. TD1 was mixed weather but nothing that drove us off the range. Range safety, mindset, basic drills were all discussed. We broke for a long dinner because there was an event in town which made finding a place to eat a little tougher and because it didn't get dark until 19:30. We did some pistol only work under low/no light conditions which exposed severe deficiencies in basic pistol skills. We did basic carbine drills under the low/no light conditions. TD2 started late due to concerns of weather and how late it gets dark. Multiple target engagements was one of my favorite drills of TD2. Doing this in the dark is even better. We went over stances/positions and malfunction drills which was a change from October as this was day one material then. No matter. Reinforced the need to practice clearing Type 3s. If you get a Type ATE on a two way range, Godspeed. TD3 incorporated everything from the previous days and added the modified Navy qual, MEUSOC, and dynamic drills (turns, shooting on the move, running, etc.) Equipment issues were interesting. The other suppressed SBR experienced erratic ejection. Brass would eject into/at the handguard, striking the rear of the rail or just barely make it out of the ejection port. Extractor was replaced but no joy. I suspect the suppressor but don't know why it would be so random. Same rifle would have the can seize on the adapter due to crap building up on the locking lugs. My M4-2000 did not experience this however after a particularly aggressive NSR, I did manage to discolor the can to a nice golden tone where the serial number is engraved. This is normal from what I have been told. One rifle had a Tubb flat wire spring that started causing the rifle to short stroke. Swapped it with a standard action spring and issues went away. Cheap Chicom flashlight went down and was replaced by a TLR1. My SBR choked on TD1 when it ran so filthy that it wouldn't go into battery. Cans are filthy. I took my BCG apart each night after class and hit it with degreaser then re-lubed. Had to re-lube two or three times a day to keep it running. By contrast, the keep-it-practical carbine I ran in October was lubed before TD1 and at the 500 round mark yet ran like a top. Those of you who run cans should take note of this (if you didn't already know). I am extremely grateful to Roy at Weapon Outfitters for sending me a T&E gas vent. Of the 1300 rounds I shot, I experienced gas face ONCE which is pretty impressive considering I was shooting full power 5.56 though a suppressed SBR. The gas vent is a very effective piece of hardware if you're shooting a suppressed rifle. Lessons learned: 1. Cans = dirty. Plan for it, accommodate it, keep shooting. 2. I need to keep a log book of my personal training (the kind between formal classes) as doing so will help me gauge when I can speed up or move further out on certain drills as well as focus on what I need to improve 3. I suck at shooting on the move. Mike shared a great drill to simulate this if your range doesn't allow you to move while shooting. Move your arms laterally to simulate the movement of you walking and learn to press the trigger as the dot intersects your target. 4. Need a better light solution. I run my gear out of Fast mags and Kydex holsters on a duty belt. Additional mags are kept in pants pockets. I need to move my handheld light to my belt and out of a pocket. 5. Standardize your movements so you only have to reinforce one set of movements. For instance, if you're standing, get in a kneeling position that allows you to access your stuff the same was as though you were standing. 6. Gear does make a difference. I attribute part of my increased speed to the different configuration of the rifle. Single stage trigger (S3G vs. SSA) and a suppressed SBR for easier recoil management made a big difference. EAG is coming back the first week of November to put Carbine 2 on again and I am planning on being there. Those of you who think taking a class once is enough need to reconsider your perspective. Having a trained, expert instructor reinforcing what you've learned already and watching you as you execute it will make you a better shooter. EAG teaches you to fight with your rifle, not put holes in paper e.g. you are training for a two-way situation and your training must make up for being on the low end of the power curve. Special thanks to Mark for being a great host and Mike for expert instruction. I had alot of fun over these three days and learned alot about myself as a shooter and my gear's limits.

You can shoot lead through a Glock but you must routinely clean it. I put 230gr hardcast through my 10mm without issue but I only shoot 100 rounds at a time and clean it after each session.

226: "Two thirty minus four"

MTS4400S is now included and the buy has been extended through 4/11

Honestly, I have no idea. If you look in the 2010 catalog, Magpul shows off plans for a 15rd limiter but it's dropped in the 2011 catalog.

I believe it's to make it easier for people to make a 5rd or 10rd mag using a Magpul limiter. This way, the end user doesn't have to drill a hole to place a rivet.

New baseplate on top. At this time, only the new black 20rd PMAGs are coming with this baseplate

My wife has that refrigerator magnet

There was a batch of FSC muzzle devices that was made with improperly heat treated steel about a year ago. If that FSC is about that old, you might want to talk to PWS about it. A friend of mine who had one from that batch had it replaced free of charge due to premature erosion.

Unfortunately, you're not going crazy and prices for limited cap mags went up across the board. It's due in part to a few things. My cost for blocking material has gone up. My vendor says it's due to oil. Don't know if he's blowing smoke but I am looking for alternatives. Secondly, the machine cost to chop mags was not properly calculated as I did a time study and discovered I was not costing what I thought was inconsequential but really was.

The only thing I'd be wary about with a rebuild kit is NJSP hasn't said if they're kosher or not the way the CA AG has.

I do but can't ship a mag to a NJ resident. Once you do get a mag, you'd also have to make your own limiting device since Magpul doesn't make a 15rd limiter, just 5rd and 10rd.

The newest revision 20rd bodies have a hole molded in the baseplate. You could always drill a hole yourself and insert a rivet too.