jcerillo70

Hey guys, I work in the hood of Asbury Park and as a Auto Dealer i handle alot of cash on a regular basis. I've had people try to car jack me twice. unfortunitly im 6'2 & 280 lbs for their sake but you never know with these guys. Anyway what would i have to go through? I would assume its a strenuous process, but i feel it is necessary I have never been in trouble with the law EVER , nor do i plan on it I have a FID card is it worth it in my mind? yes

Only a few days left !!!! I just order my upper from Del-tron today at 11:30am Here's my specs 16" Mid-Length Custom Upper [16 Custom Upper -ML Barrel:DTI 16" 1x7 Mid-Length Chrome Lined Heavy Barrel] [Custom Upper -BC:Standard Bolt & Carrier] [16 Custom Upper -ML Handguards:Mid-Length Handguard with Heat Shields] [Custom Upper -Gas Block:A2 Front Sight - No Bayonet Lug] [Custom Upper -Flash Hider:Phantom Aggressive End Comp/Brake- Pinned & Welded] [Custom Upper -Upper:Flat Top Upper with M4 Feed Ramps] [Custom Upper -Charging Handle:Standard Charging Handle] [Custom Upper -Carrying Handle:None] $520 Shipped I wonder how long its going to take?

Stupid question... But when they say "With welded compensator" on the stg556.... Is that the same as pinning the muzzle break? If the answer is yes, Then is it now NJ legal?

IF YOU GO ON PAULS (PK90) WEBSITE HE HAS THE PINNED 15 RD MAGS. ARMS-N-AMMO.COM UNDER THE ACCESSORIES TAB. I'M GETTING A COUPLE IN 3 DAYS!!! woops!!!cap locks

Ray i think we are going to have to get one! I'm putting my guitar amps on ebay as we speak... Paul...Save me on in OD Green, ill be swiping one from you shortly

Here's the first Half of the Build... If my job doesnt short me on my pay this week i might be able to order the upper tomorrow morning

agreed!!! lets see her... Ray, im putting my lower build pics up in a bit on the "To build or not to build section"

Did you buy it pinned and welded or had it done after the fact?

I just sent him a message.

I looked into these MSAR stg556's and can find one for $1000. I wonder if the muzzle has to be welded since there isnt a pistol grip or collapsible stock???? What do you guys think of this

Hey guys, I have recently fell in love with the Steyr AUG , Even though i havent even finished my AR .(next week the rest of the parts will get here). But anyway, I am still in my research stage. I know the name is banned but i was curious as to are the varients banned as well? Obviously i could build one if it came down to it, but i wanted to know if it was OK by NJ law and if its do-able... Also if anyone knows any sites that offer the parts or complete firearm, please let me know Thanks guys, Joe Cerillo

So any specific idea's for halo-graphic's ??? I'm still lost I also need to pick a rear iron sight to go with my a2 front...as a backup and untill i get the $$$ for a good Halo

I have been looking into the Truglo and in 10/11 reviews, everyone said they will not hold a zero after 100 shots. Makes me wonder if i should save up for something expensive rather than spend $100 on something that may be unreliable when i need it to work

Hey guys, I built my AR today and instead of just getting the folding rear sight, i wanted a open red dot. (Like in Call of Duty) Any suggestions? I see a bunch for $500 But im not even looking to spend half of that... Thanks guys, Joe Cerillo

I sent your envelope today

The buffer too? Ray your the best!!!

Someone mentioned to me that i need to get a buffer tube assembly. Is that true?

Why not?

ARE YOU SURE THESE ARE COMPLETE? I AM GOING TO BUY ONE TODAY IF I CAN GET SOMEONE TO CONFIRM THIS

Last but not least is this a complete upper? or am i missing anything? http://www.spikestactical.com/new/z/spikes-tactical-16-lightweight-le-upper-556-p-467.html OR------- Item Name: 16" Mid-Length Custom Upper Item Price: $500.00 Options: # 16 Custom Upper -ML Barrel:DTI 16" 1x7 Mid-Length Chrome Lined Heavy Barrel # Custom Upper -BC:Standard Bolt & Carrier # 16 Custom Upper -ML Handguards:Mid-Length Handguard with Heat Shields # Custom Upper -Gas Block:A2 Front Sight - No Bayonet Lug # Custom Upper -Flash Hider:Phantom Aggressive End Comp/Brake- Pinned & Welded # Custom Upper -Upper:Flat Top Upper with M4 Feed Ramps # Custom Upper -Charging Handle:Standard Charging Handle # Custom Upper -Carrying Handle:None http://www.del-ton.com/ProductDetails.asp?ProductCode=CU104&CartID=1 Do i need anything else to complete it? (BOLTS, IM LOOKING FOR THE WORD FIRING PIN, BUT I DONT SEE IT ANYWHERE HELP!!!! PLEASE

So i ended up gettin a M&P 15 Lower... for $120... I figured as long as theyre aluminum, lets get the one with the coolest logo on it

lol i forgot about the mags... Can i do 15 rds (if i can find them?

Stag Arms Stripped AR-15 Lower Receiver, 5.56mm Marked http://www.smallarmsales.com/Stag_Arms_Str...mm_p/stag01.htm $109.99 Spike's Tactical 16" Lightweight LE Upper http://www.spikestactical.com/new/z/spikes...-556-p-467.html $620 AR-15 Complete Lower Parts Kit http://www.del-ton.com/AR_15_Lower_Parts_Kit_p/lp1045.htm $55 I have almost every tool ever made, just not gun smithing tools so im not worried about that. And i wish i could find a less expensive NJ legal upper, im going to have to sell alot of cars to get $600 lol But most importantly...Am i missing any parts? or is this everything i need?

This thing is beautiful... And has everything i asked for. This is a little above the upper budget, i wonder if there are any a little less?

Hey guys, Im looking for a nj complient post ban complete upper. I'm having no luck in the search. Im going for the complete upper because i never built one of these before. I am pretty handy, so hopefully someone will convince me to build it myself... Any suggestions? Im going for 16'' 1/7 twist chrome lined Thanks, Joe Cerillo