Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Parker

Members
  • Joined

  • Last visited

Everything posted by Parker

  1. When Freedom Group acquired Remington some years ago, they assumed $252 million of Remington's debt. A NYTimes article last year estimated that Freedom Group had grown the debt to almost half a billion. Their QC with Remington products, along with the butchering of Marlin and Bushmaster have not made them more profitable. I think pressure from the CA Teacher's Pension made them cave in. It was Cerberus who purchased failing Chrysler, hoping to turn them around and eventually sold them.
  2. Check to make sure your guide rod is smooth. Rough ones will impede the recoil spring during feed and eject cycles. I shot a M41 for years in bullseye and never once had an "alibi." Have you ever replaced the recoil spring? What weight spring are you using; 6, 7.5 or 8 lb.? Some general tips - http://www.bullseyep...malfunction.htm Austin Behlert's tips for ejection problems: http://www.guntalk-online.com/images/behlert1.jpg http://www.guntalk-online.com/images/behlert2.jpg
  3. It is an easy task to remove the old safety button. Just don't lose the little ball detent or that tiny spring that's held captive with the tiny cross pin. I have read that the Fortmann LH safety is designed to be used with the new trigger groups. I have no experience installing them. Be mindful that if you look at that Remington parts list, there are a number of "LH" items on there that you can order. I notice that Remington sells a "LH" trigger plate assembly for RH eject. They also sell a LH eject, LHSafety (?). I couldn't tell you the difference between either one unless I had it in front of me on the workbench, so it may be wise to speak to Midway regarding the Fortmann LH safety before ordering and installation. This link with illustrations should help you for installing the Fortmann LH safety. (If you have more questions, it probably wouldn't be a bad idea to reach out to the fellow who put this thread together and ask him, for he installs his in a "new trigger group from eBay." I'd want to know what trigger plate assembly he installed it in.) http://lhshooter.com...on-install-diy/
  4. I suspect a lot of the early reporting from all those stellar news services got a few things wrong. They had Lanza's mother as a teacher at the school deceased, they released the brother's name as the shooter, the death toll was wrong, a Sig and Glock on his person at the scene, the .223 was initially reported in his car, last night I heard he had a shotgun in his car. Part of the problem is the media looking for that "exclusive," photographers wanting that photograph that will make them an icon, a newscaster or writer hunting for his Pulitzer. If I was one of the parents, I would prefer to grieve in solace rather than partake in the media circus that's taking place up there.
  5. Ray, you're a lefty? I didn't know that. Well, there's the Rem. parts list if you ever want to order a left-handed something for your 870.
  6. The 28" barrel is threaded for Remington's proprietary choke tube system, Rem™ Choke. Remington tubes are designed for both lead and steel shot. The 28" barrel would be preferable for trap and skeet shooting. Both Remington and after-market manufacturers offer choke tubes for the Express, from an open cylinder choke down to super-full choke constrictions designed for turkey; in both flush-mounted and extended.variations. http://www.remington...hoke-tubes.aspx
  7. Yep. Extractor slot cut, bolt, barrel, ejector are all different. Look at your RH 870 and envision a "negative" version or reverse image of your RH. Go to the parts list here and search the YELLOW (LH) items for the 870. http://www.remington...sPriceList.ashx
  8. LH barrels are different from RH barrels. RH ejection port means ejector staked on the left-side of receiver frame, notch on barrel extension tab cut on left side of barrel mates with staked ejector. LH ejection port means ejector staked on the right-side of receiver frame, notch on barrel extension tab cut on right side of barrel mates with staked ejector.
  9. This may be as difficult to find as a left-handed smoke shifter. Remington stopped carrying these a while ago. Try Corson's Barrels. They list a few on their website, but I suspect those listed are polished-blued versions for the 870 Wingmaster. http://www.corsonsbarrels.com/
  10. Most people won't admit this, but your statement is true. I grew up in a time when you could order a 1917 Enfield from Klein's through the mail for $29.95. I don't remember too many school shootings back then despite firearms being readily available. The school shooting with Charles Whitman at UofT was the first one of magnitude that resonated with the nation in my time. Violence in schools dates back to the 1700's. In the last few decades it seems to have gotten progressively worse and the media onslaught is prodigious to ensure it stays at the forefront because it's newsworthy. Today teachers include with their normal curriculum of the three-R's; monthly training for lockdown drills. (It's sad that phrases like "active shooter" and "lockdown drills" have become part of a school's awareness needs.) History of School Shootings in the U.S. http://www.k12academ...s-united-states
  11. Light firing pin strikes that fail to detonate can be attributed to the weapon's hammer, firing pin, headspace or the primer. Priming compound does not detonate unless the primer strike is sufficient to indent the cup face enough to strike the anvil and crush the compound between those two surfaces. Floating firing pins will always leave a slight evidence of a tap for every instance the round is chambered. DocGKR's assertion that repeated light strikes from chambering will damage the priming compound over time is a bit speculative and assumptive; not scientific. In theory, it sounds plausible, but I've never read or heard of a test where chambering "taps" that indent the cup face cause primer compound breakdown. Improper seating of primers too deep that could "crush" the primer and pulverize the priming mixture where it cannot be compressed when struck by a firing pin will result in no detonation. When you have to adhere to thousands of an inch in seating depth tolerances, it's easy to be off if something goes awry in the assembly process. In the case that Dr. Roberts presents, the problem can be isolated to just that batch of Hornady ammo or the primers used, not necessarily all 5.56 ammo or primers in general. But there is nothing wrong with erring on the side of caution when your life is on the line. (Thanks for the read!) PS - Dr. Roberts is a dentist/facial surgeon first, wound ballistic expert, and then reserve LEO/training officer. Quite a list of credentials.
  12. I agree. It was deplorable. The story changed by the minute as did the speculation.
  13. In all my years of reloading I've never heard or read of either scenario relating to primers. Primers cups are brass (70% copper, 30% zinc,) and sometimes the cup is nickel-plated for corrosion resistance; the anvil inside is brass. Brass cannot be hardened unless it is work-hardened, which would consist of a strenuous drawing of the brass by expanding and contracting it. Resizing work-hardens brass to the point of brittleness. Annealing, through heat, softens it. I would have my doubts that repeated chambering of a live round could work-harden a primer cup. I just don't see how that can happen. If the primer is seated to the proper depth, .005" below flush (below the face of the cartridge base,) it would never be subjected to any abuse that would work-harden it. Primers are both durable and extremely stable. In addition to ignition, they serve as the cartridge's gas seal. If you have a link or info to point to about this I'd be interested in reading it. Thanks
  14. There is no place to shoot a .22 at Black River. Only ranges that list "muzzleloader" can accommodate rimfire rifles.
  15. The Digest is burdensome. It is getting like that in every state. Years ago you had a pamphlet you could stick in your vest pocket and you knew what the guidelines were. There is a good thread started on the NJH forum today titled; "If you could change one F&G law" that's been an interesting read. Many items highlight how things have evolved in the state, some good, and some not so good.
  16. The written test has always been designed so that a 10 year-old could pass it. Youth represents hunting's future. The NJ education/training process has evolved over the years. All Hunter Education in the fifty states is Federally funded. Under the Pittman-Robertson Wildlife Restoration Act of 1937, up to 50% of the taxes on handguns, shotguns, rifles, bows, arrows and arrow components go towards Hunter Education. Now, if the state of New Jersey (or every state for that matter) could only make their F&W Digest understandable so that a 10 year-old could interpret it, that would be a step forward. The dizzying array of regs, zones, permits, etc. make the process to understand what and when to hunt somewhat convoluted. Based upon experience, most adults can't comprehend the NJ Digest. Other states are different on age restrictions. For example, New York is 12 years of age to acquire a junior license, and that's for small game only. It's not until age 14 that a NY junior license holder can hunt big game like deer or bear with a firearm.
  17. It's legal as a hunting arm in NJ with slugs provided it has a scope or rifle sights attached. You will not mess up the smoothbore barrel. Slugs are soft and can pass through any choke of a shotgun. That unfired slug to the right in my picture mikes at .682 OD. (.682 ID is considered an extra-full constriction in most shotgun circles when measuring choke.) Cylinder bore of a 12 ga. is .729 ID. Full choke is usually .690 ID, and that's the ID a Full RemChoke will usually mike at. At a measurement of .682, those flutes on the slug's side will swage down and easily pass through a normal full choke with no problem. (.008 is not going to offer much resistance.) However, it has been documented that more open-choked barrels provide the best accuracy with Foster-style slugs as they impart the least deformation after firing and transition through the muzzle. Just to give you ideas of chokes and how every manufacturer is different and some configurations can surprise you: My smoothbore Deerslayer's muzzle mikes at .700. That's .029 smaller than what is considered cylinder bore. A .700 ID would be considered an Improved Modified choke in most circles, yet it will cloverleaf Rem. Sluggers at 25 yds. My smoothbore Buck Special's muzzle mikes at .730. That would be considered cylinder bore. It is accurate with Brenneke's, Remington Sluggers, and Winchester slugs. But it throws Federal 1 1/4 oz. slugs all over the paper at 50 yds. You do have to test and shoot as many brands and weights to see what is best in the shotgun you've chosen. It seems like a laborious process, but you learn things along the way. There are no dead horses to flog here. Forums are about learning and sharing of information.
  18. You should do fine with that setup. If you shop around post-season, you'll find those Sluggers for a lot less. (The two deformed slugs in the picture were fired from an IC-choked slug gun many years ago, and recovered in my postmortem necropsy.)
  19. Used ethically, buckshot is effective. But I've butchered many deer to find fat-encased 00's in hindquarters and necks from previous encounters with hunters. Small testament to what deer can absorb in certain conditions and keep going when shots are poor. Some people like to toss errant shots at deer and that's not good. There's a reason why buckshot is banned in most counties of PA and in all zones in NY for big game. Its effectiveness is limited. NJ pine-hunters love buckshot, but most shots are close in those thick woods. Buckshot has no purpose in the big hardwoods or the beanfields. JMHO Slugs offer a bit more. There is little to dispute when comparing their lethality over buckshot.
  20. I've removed the cantilever on mine and will be mounting the rings on the forward portion on the barrel, "scout" style. I want to try an EER scope, something like a 1x4 variable if I can find it.
  21. So true. You need a gun culture in New Jersey for people to accept and be trusting of firearms. New Jersey only has a positive gun culture on the internet page frames courtesy of NJ-based pro-gun websites. Externally throughout the state, there is no evidence of a gun culture except in the more rural areas. Even if there is, it's fleeting. By design, the legal procurement of firearms is made difficult. It serves its purpose. The hunting culture is disappearing every day, and any news story about hunting is a vilification of such. There are only five NSCA ranges in New Jersey. (There are 23 in New York and 26 in Pennsylvania.) Golf is the accepted leisure sport in this state, however clay target shooting is not. The media needs to present a more positive image of firearms and their use in New Jersey, or at least provide some intelligent and balanced reporting. There is none, only vilification. There needs to be tone at the top instigating change based upon undercurrent rumblings. We have yet to get the man on the white horse to lead the charge. Guess what? He's not coming to town anytime soon. Santa is coming though.
  22. I totally agree. In my neck of the woods, northern Bergen County, we might as well be NYC.
  23. I didn't see that it's plastic. I would pass on that one. I have smoothbore/rifle sight configurations that all shoot slugs pretty well. I never viewed them as a deterrent to successfully taking game. I'm still a big fan of Foster-style or Brenneke slugs.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.