Everything posted by Parker
-
Taking color case hardening to new heights - The TAR-10
Not my cup of tea, but interesting to see to what extent some people with take things.
-
Taking color case hardening to new heights - The TAR-10
Saw this on Turnbull's site last night and thought I'd share - something different: http://turnbullmfg.c...e.asp?pid=36767
-
GE Moving to china..
Just one example of what happens when jobs leave America from what was once a booming industrial/manufacturing town. The subsequent fall-out and repercussions are numbing:
-
GE Moving to china..
It will be interesting to see what America looks like in another decade or two.
-
GE Moving to china..
Exactly. They are focused and hungry at the same time. My buddy sells software that manages wide area networks and VoIP phone systems here in the U.S. and England. Their call center is based in Manila City. They sell a lot of their products to U.S. and London hospitals. Phone extensions, voice mail, etc. are all set up remotely and managed by an agent in the Philippines via a phone call or an email. Across the street from the call center offices are new living quarters for the Philippine people who work there. Very convenient. http://en.wikipedia....the_Philippines
-
and the state with the most NICS checks is....??
Duh, thanks. I am "AC" (acronym challenged) on this site at times.
-
and the state with the most NICS checks is....??
Q: What is "BLF?"
-
GE Moving to china..
"Hatchet" Jack Welch (wonder how he acquired that nickname?) of GE fame began moving his back-office operations to India in the 1990's. He found it so profitable he built whole companies there to do the work. This is nothing new. GE has their John F. Welch Technology Center (Global R&D) which is located in Bangalore. It's not just low-cost back-office operations that they do there any more. It's everything. http://www.ge.com/in.../locations.html AmEx moved their back-office operations to India in the 1980's. Nobody complained then, just the poor folks in those collection call support centers who lost their jobs. Again, this is not a new phenomenon. Folks in this country just haven't been paying much attention. It's only the shareholders who are are giddy with delight. China is the new standard for manufacturing, and so goes the rush to build infrastructure there. When China becomes too expensive, Thailand and Vietnam are next. There's quite a few call-centers in the Philippines now too. They speak English very well and are more attuned to American slang than their Indian rivals. And they're cheaper!
-
Value of my 30-06
Don't forget that Bill Ruger went to Leonard Brownell who had a handle in designing the straight-combed classic-style stock as well as a variation of the dog-legged "flat bolt" which was modified later in 1971. The rifle has always had classic lines thanks to some gun-making talent.
-
Cool Pictures
Some nostalgic ads. Note the retail price in the first ad:
-
Colt lite rifle 300 mag
Good ultralight hunting rifle. A design by Melvin Forbes of Ultra Light Arms that he sold to Colt. Colt changed some parts and contracted the builds out to SACO(?) of Maine. Only a few thousand or more were made before they were discontinued. Then Forbes bought the name back and changed it to NULA (New Ultra Light Arms.) There's some info out on the net about these on sites like LongRangeHunting.com/forums. This would make a good mountain elk/sheep rifle. NULA's aren't cheap today. http://www.newultral...light-arms.html
-
Ever have a SxS double on you?
Single-trigger shotguns are more prone to doubling, but double-trigger shotguns can occasionally double. Looks like an Ithaca Lefever Nitro Special you have(?) The culprit could be a worn sear/hammer engagement. Nitro's are considered a utility grade double when it came to American side by sides, but they were durable. Those parts are something best left for a gunsmith to replace. However, you can inspect the area, it could just be gunked up. Remove the buttplate, insert a long-handled screwdriver and remove the through-bolt. Remove the rear triggerguard screw (the triggerguard may unscrew from the frame or there will be a screw in the forward portion that you can remove.) Once removed, pull the buttstock rearward, exposing the frame's lockwork. You can clean the hammer & sear notches and lightly lube things from here without further disassembly.
-
Gun for Hire Radio and Joe Kyrillos
Agreed.
-
Birdshot for HD? VIDEO!
How about "wax" slugs? I have no intention of using these for anything, other than to just play around and experiment. I made a small batch last month and finally got up to the range today to test them. Ingredients included 7/8 oz.of #8 shot, and a bit of Crayola crayon melted to make 1 oz. I topped each one off with a 20 ga. .125 card set into the wax while it was still hot. I used a moderate powder charge of Titewad. Anticipated MV with this load is rated at 1235fps. These are some trial and error examples:
-
Pachmayr Shotgun??
Pachmayr Gun Works in CA did custom work on a variety of firearms, but never made a shotgun. Google gunsmith Frank Pachmayr or Pachmayr Gun Works and you'll find tons of info. He did high-end custom work on all manner of guns, including fine doubles. A Pachmayr pistol case is something every bullseye shooter carried to the firing line. My guess is the recoil pad probably reads "Pachmayr." http://www.csmcspeci...ith_p/m0460.htm http://archives.guns...re-it-all-began
-
Gun for Hire Radio and Joe Kyrillos
I wonder if he was at the Christie fundraiser which invited the NJOA which had Romney in attendance back in the last week in June?
-
NJGF Arms Race 2012
http://oldguns.net/sn_php/marlinlookup.php
-
Food reccomendations LBI
Another plug for Howard's (try their French Fried lobster appetizer, truly decadent) and I agree with the fisherman stories told at Kubel's!
-
2400 and 158gn L/SWC... Recipies???
Bullseye and Unique are favorites. W231 I've tried as well. H110 & 2400 my favorites for the hotter loads. One of my favorite pet loads with the Hornady 158 gr. SWC uses 8.9 grs. of Blue Dot. BD actually works well with medium to high power loads.
-
Teaneck man, 72, pointed gun at neighbor over flatulence
You just can't make these stories up.......... http://www.northjers...r_with_gun.html TEANECK — A 72-year-old man is accused of threatening his neighbor with a gun for farting outside his apartment, police said. Daniel Collins Jr. is accused of pointing a silver revolver at his 47-year-old neighbor in the vestibule of their Cedar Lane apartment building and saying, “I’m going to put a hole in your head.” The confrontation occurred after Collins said his neighbor farted as he walked in front of Collins’ apartment, said Detective Lt. Andrew McGurr. Collins told detectives he heard the un-neighborly act from inside his apartment. The neighbor called police, who found a revolver under the front passenger seat of Collins’ vehicle. The gun, a .32-caliber Taurus revolver, fit the description the neighbor gave investigators, McGurr said. Collins was charged with aggravated assault, unlawful possession of a firearm, possession of a weapon for an unlawful purpose and terroristic threats. He was released on his own recognizance, McGurr said. The men had an ongoing dispute stemming from noise complaints, McGurr said.
-
Mossberg 395S
They began as a cheap yet robust utility shotgun, either as a single-shot, or repeater via tube or clip magazine feed. They have evolved over time into tack-driving rifles accurate out to 200 yards with modern sabot slugs. Tar-Hunt and Basner made a living making specialized high-end bolt-action rifled-barrel slug guns. Today Savage makes a 12 & 20 ga. slug gun today that's a bolt-action. Here are two Tar-Hunts listed for sale on G&H's website. The top one is selling for $2,600, the bottom one $3,600. Whether they get that price is another matter, but they command top dollar.
-
2400 and 158gn L/SWC... Recipies???
Sound advice! Save the 2400 for duplicating those Elmer Keith-style loads. I've used the same Hornady swaged lead 158 gr. bullet with good success to 1,000 fps and less without any leading issues in my M19. There are other powders better suited than 2400 as others have noted.
-
Mossberg 395S
Google J.B.Wood's "Gun Digest Book of Firearms :Assembly/Disassembly - Part V Revised." Detail starts on page 178. You should be able to discern whether the firing pin is working without disassembling by dropping the firing pin on an already fired shell and it should make a dimple in the already-struck primer deeper than originally there. If you insist on going further: Remove the bolt by pulling the trigger rearward Insert a small screwdriver and depress the bolt index plunger toward the rear (there's a groove where you'll find this,) and turn the front section of the bolt clockwise about one-half turn. Remove the front section of the bolt toward the front. The extractors are retained on each side of the front section by vertical pins. The pins are driven out downward, and the extractors and their coil springs are taken off toward each side. The bolt index plunger and its spring are staked into the front of the rear section, and they are NOT removed in normal disassembly. Stop here. You should be able to degrease and lube without further disassembly.
-
2400 and 158gn L/SWC... Recipies???
You won't find that combo. 2400 is a slow-burner is designed for magnum loads. That lead bullet wouldn't be a good mix when driven fast. A gas check on the base to reduce leading would be preferable. You could load the lead bullet with 11.5 grs. of 2400 (starting load in my Hornady manual for a 158 gr. jacketed bullet.) With a jacketed 158 gr. bullet, it's rated at 1,000 fps. Do you know the hardness of the lead bullet you are using? A good hardcast 158 gr. bullet with gas check can start with 13.5 grs. of 2400 up to....well, I'm not saying. I've only loaded 2400 with jacketed bullets from 110 grs. to 160 grs. over heavy charges.
-
Recommend a Great Folding Knife
Here are some of my favorite folding knives. (I have a Buck Squire somewhere but I can't find it at the moment for the photo op. I'm guessing it may be in a tackle box or a backpack somewhere.) The older Buck's and Gerber's were some of the best for the money at the time. Another favorite was a Schrade Old TImer Gunstock Trapper folder w/ liner lock that I adored but someone stole it out of my desk at work some years ago. It was the best $9 knife I ever owned. I have numerous Victorinox knives but everyone seems to have one of them. The A.G. Russell, Bucklite and Gerber Lightweight are my favorite everyday pocketknives.