AnthonyG

I was reading up on guns on Taurus forums, someone posted to check out njgf, I did and registered within a day or so from then.

Dont kick my soap box I am allowed to dream , Honestly I think a lot of people in nj dont really care about gun rights in general and aren't using that in part of their decision when voting these officials. For the most part its works against us, because its a trend among the politicians here to be anti gun so they get along with the others already in power.

I like how they say they are trying to keep guns out of the hands of people that shouldn't have them. When the fact is they don't want guns in anyone's hands, they would take guns from cops if they could do it. Luckily they are the minority in the issue, now they just need to be removed from any positions of power.

The only thing I would hold against del-ton is processing time. I have seen and heard people order lowers and uppers and it takes weeks to months to get their stuff. Their quality is good though and on par with the other companies. If you need this completed lower in kind of a hurry I suggest making sure with them ,you will get it in the websites projected time frame.

I get the feeling they left the baby to the zombies cause it was only slowing them down.

I know in upstate ny ,my uncle was on a list that police would call him when they had a deer that was just hit and they shot it. Or he sometimes had the option to shoot it himself and take it. Everyone's pretty much a hunter there so I could see people taking what they hit with them.

the left panel is metal and luckily has no damage just the plastic piece that's supposedly in the deer broke off. From what I am seeing damage is the grille, torn bumper, lower bumper was ripped out, foglight is sideways and wheel well liner was ripped off. This is only on the left side the right side and middle of car is perfectly fine. It would be expensive to fix without insurance but my deductible is only 100 dollars. Thankfully because its jersey, deer accidents fall under comprehensive and not collision since most of the accidents are unavoidable so it wont hurt my premium.

A deer decided to run through 2 lanes over a median and into the front of my truck. It was getting dark and didn't even see the deer coming from the woods on other side. The deer didn't suffer and died instantly, I told the cop I was sorry I couldn't find the outer fender,must be on the road, he said dont worry about it, its inside the deer . Here are the pics.

I have been going the battlefield 3 route kind of addicting.

I bought my px4 for 525 plus tax and nics from a local shop by me about a year ago,and they are a vendor here. I will not say who just out of fairness to all vendors, I suggest strongly using price request, you will get a good idea as to who wants your business and what a good price is.

JSE Surplus

Ah thats right, that was $41 dollars

Yeah its going to get irons of some sort soon, I put the red dot just to add to the picture of it right now. I used a roll pin but the pin is a bit bigger then the tube so it sticks out alittle, the punch took some of the black off the pin that's why its shiny.

This is kind of a guide to new AR builders to really plan ahead and know everything you have to do on a build before you start. Few months back I set out to build a AR and I wanted to do it with decent parts for under 600 dollars. The purpose of the AR was mainly plinking and partially wanting to be tacticool, because everyone has to have a AR. My main requirement as far as the build was I wanted it to for the most part be post ban compliant with little to no modifications needed. As far as parts I preferred a spikes lower because of the spider but I was open to whatever was priced the best and also had to be chambered in .556 . After all this was decided, it turned out AimSurplus had a blem sale on the spikes lowers so that sparked the start of the build. Here is my price break down and components how I "originally" planned it. Spikes Lower 69.00 DTI complete upper 16" SS bull barrel 1/8 twist 375.00 Magpul MIAD Grip 21.57 Magpul MOE handguard 20.97 Magpul MOE Stock 41.97 Double Star Lower Parts Kit 55.00 Total 583.51 So not bad right under 600 dollars only mod needed to be compliant was pinning the stock. Wrong,first I forgot about the stock tube and spring had to order that after the fact cost me about 30 dollars. Then I noticed hey wait this barrel says .223 on the bottom, so then had to send it back then I am told they didn't send out the .556 barrels cause they were blemmed so I had option of upgrading to a wilson or getting a discount on the blem. I went with the blem and when I looked at it, safe to say I really didn't notice anything but light marks, I think I marked it up more in the build then how I got it. After that mess then I had planned to change out the free floating handguard the upper came with, thats why I bought the MOE guard. Being this was my first build I forgot about all the smithing tools needed and I forgot about the delta ring assembly. Tools and parts I spent about another 90 dollars, changing out the freefloating barrel nut was a nightmare to say the least. The grease used to hold this nut on must have been crafted by Zeus himself,I broke a table clamp, two strap wrenches,and almost broke my portable vice workbench which I just bought. Finally with the help of god and a monkey wrench I was able to twist the free floating barrel nut off. At this point I thought I was free and clear for rest of build I was wrong, I had to dremel out the new barrel nut because it was a tad small since it wasnt meant for a bull barrel.The front retainer cap for handguard needed the same treatment, luckily that went smoothly it just took about a half hour of grinding. Finally everything was assembled and I greased the new barrel nut and then everything went together perfectly here are the pics of the rifle and the god awful freefloating nut. Final cost was around 650 after the extra parts and the blem discount, not bad but didn't know I was going to give myself such a hard time. Also I have to give a big shout out to OldSchool for helping me with getting an awesome deal on the upper and the Magpul parts without his help I would have spent an extra 100-150 dollars on this and he helped me get the right chambered upper.

If i remember correctly dmv guards are mostly cops, I know at eatontown the local police were part of the security their. This is going back 3-4 years. Regardless some of those guys are on either on power trips or they are burned out ex military and take it out on whoever they can.

I got a quote for around 200 and that was to go upstairs, but I ended up moving mine by myself from garage to a back room instead. It was a few steps, safe is around 450lbs but when the door is off it was probably 300. Unless you have a real big one doing yourself with some friends is a nice option if you can. Going rate for a basic safe move would be under 300 as a fair price in my opinion. 500+ dollars would be what you would pay if you were moving something real big, like say the Fort Knox Legend.

this!

I have sig229 Enhanced Elite and it has the e2 grip, the grip is quite small. I have the px4 full size and I feel the sig is smaller then the px4. Another option based on what I have tried would be maybe a glock G19, those three guns would be smallest I think as far as double stacked mags go. Walther PPQ seems like a contender as well but I have not tried one yet, hopefully will soon.

I think they should have gladiatorial games again but with crazy people like this guy, prisoners and gangs that are in prison that wanna kill each other. It would be totally voluntary no one forced to do it but I am sure a bunch of them would. It would help pay for the prison system and help clear out the prisons.

I agree, this might have played a roll in the situation aswell

I bought so much ammo on the last sale they had, I didn't leave room in my budget for a rifle

I have never seen a state trooper here in jersey doing less then 90+ mph on turnpike or parkway unless they were following a wide load truck or something requiring them to slow down. So how come we don't have state troopers pulling each other over all the time. Or how about the trooper that finally got a ticket after her fifth DUI because the ones that pulled her over wanted to give her a chance to clean up her act.. All I'm saying is cops do this crap all the time and the guy got screwed by a cop that believes in equal justice. She did the right thing, but it's not going to change the large percentage of cops that will do whatever they can get away with.

Although he was in the wrong for speeding to a off duty job , cops in general show each other "professional courtesy".I guess depending on her barracks she may get alot of crap for doing what she did or she might get praise for it. The guy shouldn't have abused his power though regardless.

Putting the parts in the lower is easier then building a piece of furniture from walmart seriously.There is a video on assembling the lower that shows step by step exactly how to do it. I think Nick shown me the video. Buying a complete upper is worth it cause you don't save much by doing it parted out and you save the aggravation. The only time I feel getting a disassembled upper is worth it is if, you have parts already from another AR you want to use or you cant find a upper in the configuration you want. Building an AR is by far cheaper then buying a completed one. I am almost finished building mine and my total cost out the door was around $590 plus you get the sense of accomplishment lol.

The rather be judged by 12 then carried by 6 doesn't apply here because regardless of your reasoning. If you are caught carrying you don't get judged by 12 you just go to jail for 7 years, lose all your rights as a citizen, and basically get disowned by society cause your a criminal, for wanting to defend yourself from the unknown.