Everything posted by NJdiverTony
-
Tumbling with Steel Media... WOW!
I have to admit that I had read a lot about tumbling with stainless steel media before and thought "Meh... big deal". I didn't see a reason to go through the expense of buying a wet tumbler and steel media, and thought just tumbling in a vibratory tumbler with corn cob or walnut media was just fine. The only thing with dry tumbling is that the insides of the cases and the primer pockets were still somewhat dirty, but was something I tolerated because: a) My reloads still worked fine and b) I didn't have a choice, unless I wanted to clean the inside of every single case and primer pocket individually (Who's got time for that?). Just recently a friend gave me a virutally new Thumler's Tumbler Model B as a gift, which I thought was great... so I decided to buy the stainless steel media and give it a try. So, last night I ran about 300 9mm cases through the tumbler for about 4 hours and when opened up the tumbler I have to admit that I was really impressed. The cases came out looking like brand spanking new... Spotless and incredibly shiny, inside and out and best of all the primer pockets were perfectly clean too. The secret to getting the brass very shiny is using a spoon or two of "Lemi Shine" along with some dish soap in the water. It works like a charm. So what are the pros and cons? Pros: - No carbon or lead dust that gets airborne that you end up breathing in - Brass looks like new, inside and out - Stainless Stell media doesn't need frequent replacement, unlike crushed corn cob or walnut media (this justifies the cost of the media... $45 for 5lbs of it) Cons: - Extra steps and time spent with this process * You have to decap/deprime your cases BEFORE tumbling to get the primer pockets clean. (I used to tumble brass with the spent primers on, so this was an extra step for me) * You have to dump out the dirty water and wash the brass with lots of fresh water to get out all the soap * Separating the media from the brass requires a 5 gallon bucket full of water and a media separator - Expense of the tumbler, which is around $180 to $200 (I was lucky enough to get mine for free) - Expense of the stainless steel media ($45 for 5 lbs) So is it worth it? If you had asked me that question before I got the tumbler and steel media I probably would have said "No"... but now that I have actually seen the resuts with my own eyes and have the equipment, I have to say "YES!" Having super shiny brass that looks like new isn't THAT important to me... I only care that my reloads work and shoot like they should. What I like best about wet tumbling is the elimination of the dust and the health benefit of this... but hey, who also doesn't love the look of super shiny brass???
-
Rail Covers Recommendation?
I've put the Magpul XTM's on my recently built AR... and I like 'em. Here's a pic of my rifle:
-
Cr123 batteries
+1 Amazon is great!
-
EF&G Accident
Wow, this will explain why the pistol range was closed when I got there on Sunday. I got there maybe about an hour after this happened and was told that the pistol range was closed, but wasn't told why... So, I ended up shooting at the rimfire range since I had a couple of my .22 pistols with me. I also had a couple of 9mm's with me, but couldn't shoot them since the pistol range was closed. I just figured they were doing maintenance or something and that was why it was closed.
-
JP yellow spring set
Cool, thanks... I might give this a try. Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
-
JP yellow spring set
Will these springs have any problems igniting Lake City NATO ammo? I've read that lighter springs like these can cause light primer strikes. Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
-
Inexpensive .22 pistols?
You can't go wrong with a Ruger Mark III or a 22/45... Great quality gun and great fun to shoot. Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
-
Good inexpensive red dot sight for a Ruger Mark III?
Aw damn... I wasn't online all day today... I wish I had seen this!
-
New addition to the family
Thanks! I took it out today to put it through its paces at the EF&G rimfire range and had a blast with it. Let me tell you that this gun is AMAZING to shoot! I am still shocked with how accurate I was with it, with just the stock sights... I can't wait to put a red dot on it... I was hitting 2" steel plates from 45 ft with total ease, over and over... I don't think I've ever shot more accurately before with a pistol, than I did today with my Mark III! Definitely get one, you won't regret it.
-
New addition to the family
It looks worse than it really is...
-
New addition to the family
Thanks guys! Stripped it down and gave it a good cleaning and lubing tonight and can't wait to get it to the range for some fun! Stripping it down and putting it back together isn't as bad as many people say the Ruger Mark I/II/III is. After doing it a couple of times I now can easily take it apart and put it back together again without a problem.
-
Good inexpensive red dot sight for a Ruger Mark III?
Looks like Primary Arms is out of stock on a lot of stuff, including the reflex or red dots I'd want to use... dang...
-
Good inexpensive red dot sight for a Ruger Mark III?
I have the Primary Arms M3 clone red dot for my AR and love it.... I'll check them out for the smaller red dot. Thanks.
-
Good inexpensive red dot sight for a Ruger Mark III?
Hey guys, Can anyone recommend a good, affordable, red dot/reflex sight for a Ruger Mark III pistol? Something for $100 or under...
-
Ammo Group Buy
Looks like 5.56/.223 and 9mm are the 2 calibers that have the most interest.
-
New addition to the family
Yep, been to Lou's many times... Good place and have bought a bunch of stuff there before. Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
-
New addition to the family
Heritage Guild in Branchburg. Sent from my SAMSUNG-SGH-I727 using Tapatalk 2got
-
held a mp shield today.
I got to fondle an M&P Shield 9mm today too, at one of the local shops... VERY nice. Even with my big paws, it felt pretty decent in my hands.
-
New addition to the family
I had been lusting after one of these for quite a while, so I decided to use up my last permit on one. Ruger Mark III Hunter. Found a great deal on it at one of the local shops and went for it.
-
Ammo Group Buy
I'd be interested in 5.56 M193/55gr
-
What 22LR Pistol
Harry, I got an M&P 22 a couple of months ago and I love it! With that being said, I had originally set out to get the Mark III Hunter... but got the M&P instead. It's a really fun pistol, the ergonomics are excellent and I have a great time with it. I have one permit left though and I'm still interested in the Mark III and want a long range target pistol... so I might end up with the Mark III too anyway.
-
My new Handgun
Congrats and good luck with it! I just picked one up last month and LOVE it! Look into the Apex DCAEK if you want to make this great pistol even better! It'll give you an awesome smooth trigger pull. It's definitely worth the investment.
-
What's "The Point"
Man, as ex-Sayreville resident, I feel bad for all the people that live right near that area... The noise and traffic from all the cars that will be going to this place and light pollution from all those signs that they will get will be horrendous. It would be enough to make me want to move out of that area (thank God I did that almost 10 yrs ago!)
-
Ar15 scope/red dot recommendation for under $200
Ahh, I didn't read that part... and yes, I agree. I would also ditch the carry handle and go with a folding BUIS on a flat top upper and THEN mount some optics.
-
Ar15 scope/red dot recommendation for under $200
Yes, it has adjustments just like a scope... Very easy. Also, if you go for it... you're better off buying everything in one shot (Red dot, Cantilevered mount, Magnifier and Quick Disconnect mount) so you can save some money... PA discounts the items a little when you buy them all at the same time. It should be under $220 with shipping.